|
|
содержание .. 811 812 813 814 ..
SERVICE INFORMATION FOR ELECTRICAL INCIDENT GI-55 < BASIC INSPECTION > C D E F G H I J K L M B GI N O P 4. While moving the connector, check whether the male terminal • If the male terminal can be easily inserted into the female ter- minal, replace the female terminal. Waterproof Connector Inspection If water enters the connector, it can short interior circuits. This may lead to intermittent problems. RUBBER SEAL INSPECTION • Most waterproof connectors are provided with a rubber seal between the male and female connectors. If the seal is missing, • The rubber seal may come off when connectors are disconnected. Whenever connectors are reconnected, make sure the rubber seal WIRE SEAL INSPECTION • The wire seal must be installed on the wire insertion area of a waterproof connector. Be sure that the seal is installed properly. Terminal Lock Inspection Check for unlocked terminals by pulling wire at the end of connector. Intermittent Incident INFOID:0000000001691470 DESCRIPTION Sometimes the symptom is not present when the vehicle is brought in for service. If possible, re-create the SEL272V SEL273V SEL275V SEL330V |