Nissan Tiida C11. Manual - part 637

EC-1198

< COMPONENT DIAGNOSIS >

[K9K]

P2299 ACCELERATOR/BRAKE PEDAL POSITION INCONSISTENCY

P2299 ACCELERATOR/BRAKE PEDAL POSITION INCONSISTENCY

DTC Logic

INFOID:0000000001162676

DTC DETECTION LOGIC

NOTE:
• Special note:

The brake and accelerator pedals were detected as depressed simultaneously for 30 seconds.

• If the DTC is present:
- Malfunction indicator (Red) lights up.

Diagnosis Procedure

INFOID:0000000001162677

1.

CHECK GROUND CONNECTIONS

1.

Turn ignition switch OFF.

2.

 Check ground connection E15. Refer to Ground inspection in 

GI-58, "Circuit Inspection"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace ground connection.

2.

CHECK BRAKE SWITCH CIRCUIT

1.

Turn ignition switch ON.

2.

Check the voltage between ECM harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> GO TO 10.

3.

CHECK ACCELERATOR PEDAL POSITION SENSOR POWER SUPPLY CIRCUIT

1.

Turn ignition switch OFF.

2.

Disconnect accelerator pedal position sensor harness connector.

3.

Turn ignition switch ON.

4.

Check the voltage between accelerator pedal position sensor connector and ground.

Is the inspection result normal?

YES

>> GO TO 5.

DTC No.

Trouble diagnosis name

Possible cause

P2299

ACCELERATOR PEDAL/BRAKE PEDAL INCONSISTENCY
• 1.DEF: Inconsistency

• Harness or connectors

(APP sensor 1 and 2 circuit is open or 
shorted.)
(Stop lamp switch circuit is open or short-
ed.)

• Accelerator pedal position sensor 

(APP sensor 1 and 2.)

• Stop lamp switch 
• Accelerator pedal

+

–

Condition

Voltage

Connector

Terminal

Connector

Terminal

E16

115

(Brake switch)

E16

128

Brake pedal

Fully released

0V

Slightly depressed

Battery voltage

Accelerator pedal position sensor

Ground

Voltage

Sensor

Connector

Terminal

1

E12 (LHD models)

M204 (RHD models)

4

Ground

Approx. 5V

2

5

P2299 ACCELERATOR/BRAKE PEDAL POSITION INCONSISTENCY

EC-1199

< COMPONENT DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

NO

>> GO TO 4.

4.

DETECT MALFUNCTIONING PART

• Harness connectors E7, M69 (RHD models)
• Harness connectors M25, M201 (RHD models)
• Harness for open or short between ECM and accelerator pedal position sensor

>> Repair open circuit or short to ground or short to power in harness or connector.

5.

CHECK ACCELERATOR PEDAL POSITION SENSOR GROUND CIRCUIT FOR OPEN AND SHORT

1.

Turn ignition switch OFF.

2.

Disconnect ECM harness connector.

3.

Check the continuity between accelerator pedal position sensor harness connector and ECM harness
connector.

4.

Also check harness for short to ground and short to power. 

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> GO TO 6.

6.

DETECT MALFUNCTIONING PART

• Harness connectors E7, M69 (RHD models)
• Harness connectors M25, M201 (RHD models)
• Harness for open or short between ECM and accelerator pedal position sensor

>> Repair open circuit or short to ground or short to power in harness or connector.

7.

CHECK ACCELERATOR PEDAL POSITION SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT

1.

Check the continuity between accelerator pedal position sensor harness connector and ECM harness
connector.

2.

Also check harness for short to ground and short to power. 

Is the inspection result normal?

YES

>> GO TO 9.

NO

>> GO TO 8.

8.

DETECT MALFUNCTIONING PART

• Harness connectors E7, M69 (RHD models)
• Harness connectors M25, M201 (RHD models)
• Harness for open or short between ECM and accelerator pedal position sensor

>> Repair open circuit or short to ground or short to power in harness or connector.

9.

CHECK ACCELERATOR PEDAL POSITION SENSOR 

Refer to 

EC-1146, "Component Inspection"

.

Is the inspection result normal?

Accelerator pedal position sensor

ECM

Continuity

Sensor

Connector

Terminal

Connector

Terminal

1

E12 (LHD models)

M204 (RHD models)

2

E16

127

Existed

2

1

120

Accelerator pedal position sensor

ECM

Continuity

Sensor

Connector

Terminal

Connector

Terminal

1

E12 (LHD models)

M204 (RHD models)

3

E16

126

Existed

2

6

119

EC-1200

< COMPONENT DIAGNOSIS >

[K9K]

P2299 ACCELERATOR/BRAKE PEDAL POSITION INCONSISTENCY

YES

>> GO TO 15.

NO

>> Replace accelerator pedal position sensor.

10.

CHECK BRAKE SWITCH POWER SUPPLY CIRCUIT

1.

Turn ignition switch OFF.

2.

Disconnect stop lamp switch harness connector.

3.

Turn ignition switch ON.

4.

Check the voltage between stop lamp switch harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 12.

NO

>> GO TO 11.

11.

DETECT MALFUNCTIONING PART

Check the following.
• Harness connectors M69, E7 (LHD models)
• Harness connectors M25, M201 (RHD models)
• 10A fuse (No. 7)
• Harness for open or short between fuse and stop lamp switch

>> Repair open circuit or short to ground or short to power in harness or connectors.

12.

CHECK BRAKE SWITCH INPUT SIGNAL CIRCUIT

1.

Turn ignition switch OFF.

2.

Disconnect ECM harness connector.

3.

Check the continuity between stop lamp switch harness connector and ECM harness connector.

4.

Also check harness for short to ground and short to power. 

Is the inspection result normal?

YES

>> GO TO 14.

NO

>> GO TO 13.

13.

DETECT MALFUNCTIONING PART

Check the following.
• Harness connectors M69, E7 (RHD models)
• Harness connectors M25, M201 (RHD models)
• 10A fuse (No. 7)
• Harness for open or short between fuse and stop lamp switch

>> Repair open circuit or short to ground or short to power in harness or connectors.

14.

CHECK STOP LAMP SWITCH 

Refer to 

EC-1215, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 15.

NO

>> Replace stop lamp switch.

15.

CHECK ACCELERATOR PEDAL 

Stop lamp switch

Ground

Voltage

Connector

Terminal

E13 (LHD models)

M203 (RHD models)

1

Ground

Battery voltage

Stop lamp switch

ECM

Continuity

Connector

Terminal

Connector

Terminal

E13 (LHD models)

M203 (RHD models)

2

E16

115

Existed

P2299 ACCELERATOR/BRAKE PEDAL POSITION INCONSISTENCY

EC-1201

< COMPONENT DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

Refer to 

EC-1146, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 16.

NO

>> Replace accelerator pedal position sensor.

16.

CHECK INTERMITTENT INCIDENT

Refer to 

GI-55, "Intermittent Incident"

.

>> INSPECTION END