|
|
содержание .. 576 577 578 579 ..
EC-962 < COMPONENT DIAGNOSIS > [MR18DE] P2138 APP SENSOR 2. Also check harness for short to ground and short to power. Is the inspection result normal? YES >> GO TO 14. NO >> GO TO 13. 13. DETECT MALFUNCTIONING PART Check the following. >> Repair open circuit or short to ground or short to power in harness or connectors. 14. CHECK APP SENSOR EC-962, "Component Inspection" Is the inspection result normal? YES >> GO TO 11. NO >> GO TO 10. 15. REPLACE ACCELERATOR PEDAL ASSEMBLY 1. Replace accelerator pedal assembly. 2. Go to EC-963, "Special Repair Requirement" . >> INSPECTION END 16. CHECK INTERMITTENT INCIDENT GI-55, "Intermittent Incident" >> INSPECTION END Component Inspection INFOID:0000000001161951 1. CHECK ACCELERATOR PEDAL POSITION SENSOR 1. Reconnect all harness connectors disconnected. 2. Turn ignition switch ON. 3. Check the voltage between ECM harness connector terminals as follows. Is the inspection result normal? YES >> INSPECTION END NO >> GO TO 2. 2. REPLACE ACCELERATOR PEDAL ASSEMBLY 1. Replace accelerator pedal assembly. 2. Go to EC-963, "Special Repair Requirement" . APP sensor ECM Continuity Connector Terminal Connector Terminal E12 (LHD models) M204 (RHD models) 3 E16 110 Existed 6 103 (+) (–) Condition Voltage Connector Terminal Connector Terminal E16 110 (APP sensor 1 signal) E16 111 Accelerator pedal Fully released 0.6 - 0.9V Fully depressed 3.9 - 4.7V 103 (APP sensor 2 signal) 104 Fully released 0.3 - 0.6V Fully depressed 1.95 - 2.4V |