|
|
содержание .. 477 478 479 480 ..
EC-566 < COMPONENT DIAGNOSIS > [HR16DE (WITHOUT EURO-OBD)] P1706 PNP SWITCH P1706 PNP SWITCH Description INFOID:0000000001693388 When the shift lever position is P or N (A/T) Neutral (M/T) position, park/neutral position (PNP) switch is ON. DTC Logic INFOID:0000000001693389 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. INSPECTION START Do you have CONSULT-III? YES >> GO TO 2. NO >> GO TO 5. 2. PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at >> GO TO 3. 3. CHECK PNP SWITCH FUNCTION With CONSULT-III 1. Turn ignition switch ON. 2. Select “P/N POSI SW” in “DATA MONITOR” mode with CONSULT-III. Then check the “P/N POSI SW” sig- Is the inspection result normal? YES >> GO TO 4. NO >> Go to 4. PERFORM DTC CONFIRMATION PROCEDURE 1. Select “DATA MONITOR” mode with CONSULT-III. 2. Start engine and warm it up to normal operating temperature. 3. Maintain the following conditions for at least 50 consecutive seconds. CAUTION: Always drive vehicle at a safe speed. DTC No. Trouble diagnosis name DTC detecting condition Possible cause P1706 Park/neutral position The signal of the park/neutral position (PNP) • Harness or connectors [The park/neutral position (PNP) switch • Park/neutral position (PNP) switch Position (Shift lever) Known-good signal P or N position (A/T) ON Except above position OFF ENG SPEED 1,500 - 6,375 rpm COOLAN TEMP/S More than 70 ° C (158 ° F) B/FUEL SCHDL 3.5 - 31.8 msec |