Nissan Tiida C11. Manual - part 1271

2. Accelerator pedal position sensor

3. Line pressure test

4. Line pressure solenoid valve

5. Shift solenoid valve B

TM-89

6. Control valve assembly

OFF vehicle

7. Brake band

8. High clutch

Races extremely fast
or slips in changing
from D

or D

to D

when depressing ac-
celerator pedal.

ON vehicle

1. A/T fluid level

2. Accelerator pedal position sensor

3. Line pressure test

4. Line pressure solenoid valve

5. Shift solenoid valve A

TM-85

6. Shift solenoid valve B

TM-89

7. Control valve assembly

OFF vehicle

8. Forward clutch

9. Forward one-way clutch

TM-278

10. Low one-way clutch

Vehicle will not run in
any position.

ON vehicle

1. A/T fluid level

2. Control cable adjustment

3. Line pressure test

4. Line pressure solenoid valve

OFF vehicle

5. Oil pump

TM-240

6. High clutch

7. Brake band

8. Low & reverse brake

9. Torque converter

10. Parking components

TM-213

Others

Engine cannot be
started in “P” and “N”
positions.

TM-140

ON vehicle

1. Ignition switch and starter

STR-6

2. Control cable adjustment

3. PNP switch adjustment

Engine starts in posi-
tions other than “P”
and “N”.

ON vehicle

1. Control cable adjustment

2. PNP switch adjustment

Items

Symptom

Condition

Diagnostic item

Reference page

TM-136

< SYMPTOM DIAGNOSIS >

[TYPE 1 (4AT: RE4F03B)]

SYSTEM SYMPTOM

Others

Transaxle noise in“ P”
and “N” positions.

ON vehicle

1. A/T fluid level

2. Line pressure test

3. Accelerator pedal position sensor

4. Vehicle speed sensor·A/T (Revolution sensor)
and vehicle speed sensor·MTR

TM-52

and

TM-97

OFF vehicle

5. Oil pump

TM-240

6. Torque converter

Vehicle moves when
changing into “P” po-
sition or parking gear
does not disengage
when shifted out of “P”
position.

ON vehicle

1. Control cable adjustment

OFF vehicle

2. Parking components

TM-213

Vehicle runs in “N” po-
sition.

TM-141

ON vehicle

1. Control cable adjustment

OFF vehicle

2. Forward clutch

3. Reverse clutch

4. Overrun clutch

Vehicle braked when
shifting into “R” posi-
tion.

ON vehicle

1. A/T fluid level

2. Control cable adjustment

3. Line pressure test

4. Line pressure solenoid valve

5. Control valve assembly

OFF vehicle

6. High clutch

7. Brake band

8. Forward clutch

9. Overrun clutch

Excessive creep.

ON vehicle

1. Engine idling speed

EC-26

Engine stops when
shifting lever into “R”,
“D”, “2” and “1” posi-
tions.

ON vehicle

1. Engine idling speed

EC-26

2. A/T fluid level

3. Torque converter clutch solenoid valve

TM-73

4. Control valve assembly

OFF vehicle

5. Torque converter

Vehicle braked by
gear change from D

to D

ON vehicle

1. A/T fluid level

OFF vehicle

2. Reverse clutch

3. Low & reverse brake

4. High clutch

5. Low one-way clutch

Vehicle braked by
gear change from D

to D

ON vehicle

1. A/T fluid level

OFF vehicle

2. Brake band

Items

Symptom

Condition

Diagnostic item

Reference page

SYSTEM SYMPTOM

TM-137

< SYMPTOM DIAGNOSIS >

[TYPE 1 (4AT: RE4F03B)]

Others

Vehicle braked by
gear change from D

to D

ON vehicle

1. A/T fluid level

OFF vehicle

2. Overrun clutch

3. Forward one-way clutch

TM-278

4. Reverse clutch

Maximum speed not
attained. Poor accel-
eration.

ON vehicle

1. A/T fluid level

2. PNP switch adjustment

3. Overdrive control switch

TM-111

4. Accelerator pedal position sensor

5. Vehicle speed sensor·A/T (Revolution sensor)
and vehicle speed sensor·MTR

TM-52

and

TM-97

6. Shift solenoid valve A

TM-85

7. Shift solenoid valve B

TM-89

8. Control valve assembly

OFF vehicle

9. Reverse clutch

10. High clutch

11. Brake band

12. Low & reverse brake

13. Oil pump

TM-240

14. Torque converter

Transaxle noise in
“D”, “2”, “1” and “R”
positions.

ON vehicle

1. A/T fluid level

OFF vehicle

2. Torque converter

Engine brake does
not operate in “1” po-
sition.

ON vehicle

1. PNP switch adjustment

2. Control cable adjustment

3. Vehicle speed sensor·A/T (Revolution sensor)
and vehicle speed sensor·MTR

TM-52

and

TM-97

4. Control valve assembly

5. Overrun clutch solenoid valve

TM-93

OFF vehicle

6. Overrun clutch

7. Low & reverse brake

TM-35, "CONSULT-III Function (TRANSMISSION)"

Items

Symptom

Condition

Diagnostic item

Reference page

TM-138

< SYMPTOM DIAGNOSIS >

[TYPE 1 (4AT: RE4F03B)]

SYSTEM SYMPTOM

OD OFF Indicator Lamp Does Not Come On

INFOID:0000000001696242

SYMPTOM:
OD OFF indicator lamp does not come on for about 2 seconds when turning ignition switch to ON.

CHECK CAN COMMUNICATION LINE

Perform self-diagnosis. Refer to

TM-350, "Diagnosis

Procedure without CONSULT-III"

Is a malfunction in CAN communication indicated in the results?

YES

>> Check CAN communication line. Refer to

TM-43, "Description"

(type 1) or

TM-391, "Description"

(type 2).

>> GO TO 2.

CHECK TCM POWER SOURCE

Turn ignition switch ON. (Do not start engine.)

Check voltage between TCM connector terminals and ground.

Others

Transaxle overheats.

ON vehicle

1. A/T fluid level

2. Engine idling speed

EC-26

3. Accelerator pedal position sensor

4. Line pressure test

5. Line pressure solenoid valve

6. Control valve assembly

OFF vehicle

7. Oil pump

8. Reverse clutch

9. High clutch

10. Brake band

11. Forward clutch

12. Overrun clutch

13. Low & reverse brake

14. Torque converter

ATF shoots out during
operation.
White smoke emitted
from exhaust pipe
during operation.

ON vehicle

1. A/T fluid level

OFF vehicle

2. Reverse clutch

3. High clutch

4. Brake band

5. Forward clutch

6. Overrun clutch

7. Low & reverse brake

Unusual smell at A/T
fluid charging pipe.

ON vehicle

1. A/T fluid level

OFF vehicle

2. Torque converter

3. Oil pump

4. Reverse clutch

5. High clutch

6. Brake band

7. Forward clutch

8. Overrun clutch

9. Low & reverse brake