|
|
содержание .. 72 73 74 75 ..
BRC-62 < ECU DIAGNOSIS > [ABS] ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) ECU DIAGNOSIS ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) Reference Value INFOID:0000000001731339 VALUES ON THE DIAGNOSIS TOOL CAUTION: The display shows the control unit calculation data, so a normal value might be displayed even in the CONSULT-III MONITOR ITEM Monitor item Display content Data monitor Condition Reference value in normal operation FR LH SENSOR Wheel speed 0 [km/h (MPH)] Vehicle stopped Nearly matches the speed meter display ± 10% or less) Vehicle running (Note 1) FR RH SENSOR Wheel speed 0 [km/h (MPH)] Vehicle stopped Nearly matches the speed meter display ± 10% or less) Vehicle running (Note 1) RR LH SENSOR Wheel speed 0 [km/h (MPH)] Vehicle stopped Nearly matches the speed meter display ± 10% or less) Vehicle running (Note 1) RR RH SENSOR Wheel speed 0 [km/h (MPH)] Vehicle stopped Nearly matches the speed meter display ± 10% or less) Vehicle running (Note 1) STOP LAMP SW Stop lamp switch signal status When brake pedal is depressed ON When brake pedal is released OFF BATTERY VOLT Battery voltage supplied to the ABS actuator Ignition switch ON 10 – 16 V GEAR Gear position determined by TCM 1st gear 1 SLCT LVR POSI A/T selector lever position P position P OFF SW VDC OFF switch ON/OFF VDC OFF switch ON ON VDC OFF switch OFF OFF YAW RATE SEN Yaw rate detected by yaw rate/side/decel G When vehicle is stopped Approx. 0 d/s When vehicle turning − 75 to 75 d/s ACCEL POS SIG Throttle actuator opening/closing is dis- Accelerator pedal not depressed (ignition 0 % Accelerator pedal depressed (ignition 0 - 100 % |