Mitsubishi Mirage (2022 year). Manual in english - page 4

 

  Index      Manuals     Mitsubishi Mirage (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..

 

 

 

Mitsubishi Mirage (2022 year). Manual in english - page 4

 

 

Electronic immobilizer (Anti-theft starting system)
NOTE
NOTE
• Keep away from devices that produce mag-
z When the theft-alarm is in the system opera-
netism, such as audio systems, computers
tional status, the alarm operates if a door or
and televisions.
liftgate is opened after using the key, the
• Keep away from devices that emit strong
door lock knob or the power door lock
electromagnetic waves, such as cellular
switch to unlock the vehicle.
phones, wireless devices and high fre-
z The system does not enter the preparation
quency equipment
(including medical
status if the keyless entry system or the
5
devices).
F.A.S.T.-key was not used to lock the vehi-
• Do not clean with ultrasonic cleaners.
cle.
• Do not leave the key where it may be
1-
F.A.S.T.-key
exposed to high temperature or high humid-
(with electronic immobilizer and key-
Electronic immobilizer
ity.
less entry system function)
z
If you lose your key, to prevent the theft of
(Anti-theft starting system)
2-
Emergency key
the vehicle immediately contact an autho-
N00509101976
3-
Key number plate
rized Mitsubishi Motors dealer.
If you notify an authorized Mitsubishi
CAUTION
Motors dealer of the key number, they can
z Do not make any alterations or additions to
NOTE
make a new key. The key number is stamped
the immobilizer system. Alterations or addi-
on the key number plate. Keep the key num-
z
The keyless entry key and F.A.S.T.-key are a
tions could cause failure of the immobilizer.
ber plate in a safe place separate from the
precision electronic device with a built-in
key itself.
signal transmitter. Please observe the follow-
[For vehicles equipped with the Free-hand
ing in order to prevent damage.
z
No keys other than those registered in
advance can be used to start the engine.
Advanced Security Transmitter
(F.A.S.T.-
• Do not leave where it may be exposed to
Refer to “Electronic immobilizer (Anti-theft
key)]
heat caused by direct sunlight, such as on
starting system)” on page 5-3.
For information on operations for vehicles
top of the dashboard.
Refer to
“Free-hand Advanced Security
equipped with the Free-hand Advanced Secu-
• Do not take the remote control transmitter
Transmitter
(F.A.S.T.-key):
“Electronic
rity Transmitter
(F.A.S.T.-key), refer to
apart.
immobilizer (Anti-theft starting system)” on
• Do not excessively bend the key or subject
“Free-hand Advanced Security Transmitter
page 5-21.
it to strong impacts.
(F.A.S.T.-key): Electronic immobilizer (Anti-
• Keep the remote control transmitter dry.
theft starting system)” on page 5-21.
• Keep away from magnetic objects such as
key rings.
Features and controls
5-3
Electronic immobilizer (Anti-theft starting system)
[Except for vehicles equipped with the Free-
NOTE
NOTE
hand Advanced Security Transmitter
• When the key grip contacts metal of
z Electronic immobilizer is not compatible
(F.A.S.T.-key)]
another key
with commercially available remote starting
The electronic immobilizer is designed to sig-
systems. Use of commercially available
nificantly reduce the possibility of vehicle
remote starting systems may result in vehicle
theft. The purpose of the system is to immo-
starting problems and a loss of security pro-
bilize the vehicle if an invalid start is
tection.
attempted. A valid start attempt can only be
z A system failure is suspected when the igni-
5
achieved (subject to certain conditions) using
tion switch is turned to the “START” posi-
a key “registered” to the immobilizer system.
tion, and the engine does not start. In such a
All of the keys provided with your new vehi-
case, contact an authorized Mitsubishi
cle have been programmed to the vehicle’s
Motors dealer.
• When the key contacts or is close to other
electronics.
immobilizer keys (including keys of other
Replacement keys
vehicles)
NOTE
z
In the following cases, the vehicle may not
Only keys that have been programmed to the
be able to recognize the registered ID code
vehicle’s electronics can be used to start the
from the key. This means the engine will not
vehicle.
start even when the key is turned to the
“START” position.
If you lose the key, you can order a key from
• When the key contacts a key ring or other
your authorized Mitsubishi Motors dealer by
metallic or magnetic object
referring to the key number.
To prevent vehicle theft, the ID code for the
z
In cases like the above, move the offending
vehicle keys must be changed.
object(s) away from the key and turn the key
back to the “ACC” or “OFF” position. Then
Take your vehicle and all remaining keys to
try to start the engine again. If the engine
your authorized Mitsubishi Motors dealer to
does not start, contact an authorized
have your ID code changed.
Mitsubishi Motors dealer.
z
The key may not operate properly when it is
near an object or facility that emits strong
electromagnetic waves.
5-4
Features and controls
Electronic immobilizer (Anti-theft starting system)
your vehicle at your Mitsubishi Motors
Additional keys
NOTE
dealer) by doing the following:
z When the key registration is completed, the
immobilizer indicator will come on within 3
To add a key, you must already have 2 regis-
1. Insert the first valid key into the ignition
seconds of turning the ignition switch to the
tered keys. You need to register the ID code
switch and turn the key to the “ON” posi-
“ON” position with the blank immobilizer
to the vehicle.
tion for 5 seconds.
key (specially cut for your vehicle at your
Registering the ID code can be done by your-
2. Turn the key to the “OFF” position and
Mitsubishi Motors dealer).
self (except for vehicles sold in Canada), or
remove the first key.
by your authorized Mitsubishi Motors dealer.
3. Within 30 seconds of removing the first
5
5. If you wish to register another key, per-
For you to register the ID code yourself, fol-
key, insert the second valid key into the
form the process again from step 1.
low the “Customer key programming” proce-
ignition and turn it to the “ON” position.
dure below.
About 10 seconds later, the immobilizer
If you choose to have your authorized
indicator will start to blink.
NOTE
Mitsubishi Motors dealer register the ID
4. When the immobilizer indicator starts
z
It is not possible to register a key if:
code, take your vehicle and all remaining
blinking, turn the second valid key to the
• the immobilizer indicator goes off during
keys to your authorized Mitsubishi Motors
“OFF” position and remove it. Within 30
the procedure
dealer.
seconds after doing so, insert a blank
• the immobilizer indicator does not come on
immobilizer key into the ignition switch
within 30 seconds after step 4.
and turn it to the “ON” position. Perform
z
The procedure will be terminated automati-
NOTE
this operation no more than 30 seconds
cally if:
z You are provided with 2 keys, but you may
after the immobilizer indicator starts
• a period of 30 seconds or longer elapses
register up to 8 keys.
blinking. When registration of the ID
from the moment when the first key is
turned to the “OFF” position to the moment
code is complete, the immobilizer indica-
when the second key is turned to the “ON”
tor will come on for 3 seconds then go off.
Customer key programming
position
If an error occurs, the immobilizer indica-
(Except for vehicles sold in
• a period of 30 seconds or longer elapses
tor will go off during the procedure.
from the moment when the second key is
Canada)
turned to the “OFF” position to the moment
N00562201194
when the blank immobilizer key is turned
You can program new keys to the system if
to the “ON” position
you have two valid (already registered) keys
• more than
20 seconds elapses after the
and blank immobilizer key (specially cut for
immobilizer indicator starts blinking
Features and controls
5-5
Keyless entry system (if so equipped)
General information
Keyless entry system (if so
NOTE
N00562301140
z If you press the LOCK button (1) twice the
equipped)
horn will sound once.
Your electronic immobilizer operates on a
N00509002187
radio frequency subject to Federal Communi-
Press the remote control transmitter buttons
cations Commission (FCC) Rules (For vehi-
to lock or unlock the doors and the liftgate.
cles sold in U.S.A.) and Industry Canada
To unlock
It can also help you signal for attention by
Rules (For vehicles sold in Canada). This
setting off the panic alarm.
5
device complies with part 15 of FCC Rules
Press the UNLOCK button (2) to unlock the
and Industry Canada licence-exempt RSS
driver’s door only.
standard(s).
Within about 2 seconds, press the UNLOCK
Operation is subject to the following two con-
button one more time to unlock all the doors
ditions.
and liftgate.
The dome light will turn on for 30 seconds.
z This device may not cause harmful inter-
The turn signal lights will also blink twice.
ference.
The front side-marker and parking lights will
z This device must accept any interference
also turn on for approximately 30 seconds.
received, including interference that may
Refer to “Welcome light” on page 5-97.
cause undesired operation of this device.
This device complies with ISED radiation
NOTE
1-
LOCK (
) button
exposure Hand/Foot limits set forth for an
z If the UNLOCK switch (2) is pressed and no
2-
UNLOCK (
) button
door or liftgate is opened within approxi-
uncontrolled environment and meets RSS-
3-
PANIC button
mately 30 seconds, relocking will automati-
102 of the ISED radio frequency (RF) Expo-
cally occur.
sure rules as this device has very low levels
4-
Indicator light
z The amount of time after unlocking until the
of RF energy.
vehicle relocks automatically can be
adjusted. See an authorized Mitsubishi
To lock
WARNING
Motors dealer for details.
z Changes or modifications not expressly
approved by the party responsible for
Press the LOCK button (1) to lock all the
compliance could void the user’s authority
doors and the liftgate.
to operate the equipment.
The turn signal lights will also blink once.
5-6
Features and controls
Keyless entry system (if so equipped)
3. Press the LOCK button (1) for 4 to 10 sec-
Answerback function
Replacement remote control
onds and press the UNLOCK button (2)
during this time.
transmitters
The horn of the keyless entry system answer-
4. Release in sequence the UNLOCK and
N00543800051
back function can be changed as required.
LOCK buttons within
10 seconds of
Only remote control transmitters pro-
This is done with the key removed from the
pressing the UNLOCK button in step 3.
grammed with the vehicle’s electronics can
ignition switch.
lock or unlock all doors and the liftgate.
Turn signal lights deactiva-
5
If you lose the remote control transmitter, you
NOTE
tion/reactivation
can order a remote control transmitter from
z The answerback function will not operate if
your authorized Mitsubishi Motors dealer by
any of the doors are open.
The turn signal lights answerback function
referring to the key number.
can be changed.
To prevent vehicle theft, the ID code for the
If you want to change the answerback func-
remote control transmitter must be changed.
Horn deactivation/reactivation
tion, please contact an authorized Mitsubishi
Take your vehicle and all remote control
Motors dealer.
transmitters to your authorized Mitsubishi
The answerback function can be set in the
Motors dealer to have your ID code changed.
following three ways.
Each time the answerback function is set, a
Using the panic alarm
chime will sound to tell you the condition of
N00543701099
Additional remote control
the answerback function.
If you are near your vehicle and feel threat-
transmitters
ened, you may activate the alarm to call atten-
N00543900078
One chime: The horn will not sound.
tion as follows:
To add a remote control transmitter, you must
Two chimes: The horn will sound.
already have
1 registered remote control
Four chimes: The horn will sound if the
1. Press the PANIC button (3) for more than
transmitter.
LOCK button is pressed twice
1 second.
Registering the ID code can be done by your
within 1 second.
2. The headlights will blink on and off and
authorized Mitsubishi Motors dealer.
the horn will sound intermittently for
Take your vehicle and any remaining keys to
about 3 minutes.
your authorized Mitsubishi Motors dealer.
1. Remove the key from the ignition switch.
3. To turn off the alarm, press any button on
2. Open the driver’s door and turn the com-
the remote control transmitter.
bination headlights and dimmer switch to
the “OFF” position.
Features and controls
5-7
Keyless entry system (if so equipped)
NOTE
Procedure for replacing the
WARNING
z You are provided with
2 remote control
remote control transmitter bat-
• Do not use, store, or take a battery any
transmitters, but you may register up to 4
place where it may be exposed to
tery
remote control transmitters.
extremely high temperature or extremely
N00544101276
low air pressure.
WARNING
General information
z
Do not swallow a coin type battery.
CAUTION
5
N00546100114
• This product contains coin type battery.
z
When the remote control transmitter case is
Your keyless entry system operates on a radio
If a coin type battery is swallowed, it can
opened, be careful to keep water, dust, etc.
frequency subject to Federal Communica-
cause severe internal burns and can lead
out. Also, do not touch the internal compo-
tions Commission (FCC) Rules (For vehicles
to death.
nents.
There have been cases where a swallowed
sold in U.S.A.) and Industry Canada Rules
z
Dispose of used battery according to regula-
battery has caused severe internal burns
(For vehicles sold in Canada). This device
tions for the disposal of battery.
in just 2 hours.
complies with Part
15 of FCC Rules and
• Keep new and used batteries away from
Industry Canada licence-exempt RSS stan-
children.
1. Before replacing the battery, remove static
dard(s).
• If the remote control transmitter case
electricity from your body by touching a
Operation is subject to the following two con-
does not close securely, stop using the
metal grounded object.
ditions.
product and keep it away from children.
2. Remove the screw (A) from the remote
• If you think batteries might have been
control transmitter.
z This device may not cause harmful inter-
swallowed or placed inside any part of a
ference.
person’s body, seek immediate medical
z This device must accept any interference
attention.
received, including interference that may
z
To prevent an explosion or leakage of
cause undesired operation of this device.
flammable liquid or gas:
• Do not replace the battery with an incor-
rect type. Replace only with the same or
WARNING
equivalent type.
z Changes or modifications not expressly
• Do not dispose of a battery into a fire or
approved by the party responsible for
incinerator, or by mechanically crushing
compliance could void the user’s authority
or cutting the battery.
to operate the equipment.
5-8
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
3. With the Mitsubishi mark facing you,
8. Check the keyless entry system to see that
NOTE
insert the cloth-cov-ered tip of a flat blade
it works.
z The Federal Communications Commission
screwdriver into the notch in the remote
(FCC) ID number, the Industry Canada (IC)
control transmitter case and use it to open
number and the model number (radio certifi-
NOTE
the case.
cation) are indicated in the illustrated posi-
z You may purchase a replacement battery at
tion.
an electric appliance store.
z An authorized Mitsubishi Motors dealer can
replace the battery for you if you prefer.
5
Free-hand Advanced Secu-
rity Transmitter (F.A.S.T.-
key) (if so equipped)
N00503101248
4. Remove the used battery.
5. Install a new battery with the + side (B)
The Free-hand Advanced Security Transmit-
NOTE
up.
ter (F.A.S.T.-key) enables the doors and the
z
Be sure to perform the procedure with the
liftgate to be locked and unlocked, the engine
Mitsubishi mark facing you. If the
to be started and the operation mode to be
Mitsubishi mark is not facing you when you
+ side
changed simply by carrying it.
open the remote control transmitter case, the
The F.A.S.T.-key can also be used as the
buttons may come out.
- side
remote control transmitter of the keyless
entry system.
Refer to
“Free-hand Advanced Security
Coin type
Transmitter
(F.A.S.T.-key): Keyless entry
battery
system” on page 5-22.
CR1620
6. Close the remote control transmitter
firmly.
7. Attach the screw (A) removed in step 2.
Features and controls
5-9
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
The operations possible with the F.A.S.T.-
The F.A.S.T.-key must be carried by the
key can be modified as stated below.
driver. The F.A.S.T.-key is required for
(Keyless entry operations are possible.)
vehicle operations such as locking and
For details, contact an authorized
unlocking the doors and the liftgate,
Mitsubishi Motors dealer.
starting the engine, and changing the
• Enabling only the locking and unlocking
operation mode. When leaving the vehi-
of the doors and the liftgate
cle, make sure you are carrying the
• Enabling only the starting of the engine
F.A.S.T.-key and then lock the vehicle.
5
• Deactivating the F.A.S.T.-key
WARNING
NOTE
z
Individuals who use implantable pace-
z
The F.A.S.T.-key uses weak electromagnetic
makers or implantable cardiovascular-
waves.
defibrillators should keep away from the
In cases such as the following, operation
external and internal transmitters. The
A- External transmitter
may be improper or unstable.
electromagnetic waves used in the
B- Internal transmitter
• The vehicle is near a facility that emits
F.A.S.T.-key may affect the operation of
strong electromagnetic waves, such as a TV
implantable pacemakers and implantable
transmitting tower, a power station, a radio
cardiovascular-defibrillators.
WARNING
station or an airport
z Individuals using other electro-medical
• The key is carried together with other com-
apparatus besides implantable pacemak-
munication devices such as cellular phones
ers and implantable cardiovascular-defi-
or radios, or electrical appliances such as
brillators
should check with the
computers
manufacturer of the apparatus to confirm
• The F.A.S.T.-key touches or is covered by a
the effect of the electromagnetic waves
metal object
used by the F.A.S.T.-key. The electromag-
• A keyless entry system is being used
netic waves may affect the operations of
nearby
the electro-medical apparatus.
• The battery of the F.A.S.T.-key is run down
• The vehicle is in a location with strong
electromagnetic waves or noise
5-10
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
NOTE
Use the emergency key in such circum-
stances.
Refer to
“To operate without using the
F.A.S.T.-key” on page 5-20.
z
The F.A.S.T.-key is constantly performing
reception operations in its communication
with the vehicle. This means that the battery
5
is always running down, regardless of how
often the F.A.S.T.-key is used. The battery
life is about 1 to 2 years, depending on the
usage conditions.
*: Front of the vehicle
z
Since the F.A.S.T.-key is constantly perform-
NOTE
: Operating range
ing reception operations, the reception of
z
When the battery of the F.A.S.T.-key has run
strong electromagnetic waves can accelerate
down or there are strong electromagnetic
the running down of the battery. Do not place
waves or noise in the area, the operating
NOTE
near to electrical appliances such as televi-
range could decrease or operations could
z
Only the doors and the liftgate that detect the
sions or computers.
become unstable.
F.A.S.T.-key can be locked and unlocked.
z
The system may not operate if the F.A.S.T.-
Operating range of the
key is too close to the windshield, door win-
Operating range for locking and
dows or liftgate.
F.A.S.T.-key
unlocking the doors and the lift-
z
Even if the F.A.S.T.-key is within about 2.3
N00503201294
feet (70 cm) of the driver’s door lock/unlock
gate
When a person enters the operating range of
switch or the liftgate lock/unlock switch, the
the F.A.S.T.-key while carrying the F.A.S.T.-
system may not operate if the key is close to
key and presses the driver’s door lock/unlock
The operating range is within about 2.3 feet
the ground or in a high position.
switch the liftgate lock/unlock switch, verifi-
(70 cm) of the driver’s door lock/unlock
z
If the F.A.S.T.-key is within the operating
switch and the liftgate lock/unlock switch.
range, even a person not carrying the
cation of the ID code is performed.
F.A.S.T.-key can lock and unlock the doors
The doors and the liftgate can only be locked
or the liftgate by pressing the driver’s door
and unlocked, the engine can only be started
lock/unlock
switch or the
liftgate
and the operation mode can only be changed
lock/unlock switch.
when the ID codes of the vehicle and
F.A.S.T.-key match.
Features and controls
5-11
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Operating range for starting the
NOTE
Driver’s door lock/unlock switch
engine and changing the opera-
z Even if the F.A.S.T.-key is inside the vehicle,
it may not be possible to start the engine and
tion mode
change the operation mode if the key is too
N00503300070
close to a door or door window.
The operating range is the interior of the
vehicle.
To operate using the F.A.S.T.-
5
key
N00503401515
To lock
Liftgate lock/unlock switch
While carrying the F.A.S.T.-key, press the
driver’s door lock/unlock switch (A), or the
liftgate lock/unlock switch
(B) within the
operating range to lock all the doors and the
liftgate.
*: Front of the vehicle
The turn signal lights will blink once and the
: Operating range
buzzer will sound once.
Also refer to
“Doors locks”, “Power door
locks” and “Liftgate” on pages 5-26, 5-27 and
NOTE
NOTE
5-29 respectively.
z
Even if the F.A.S.T.-key is within the operat-
z
In cases such as the following, the F.A.S.T.-
ing range, it may not be possible to start the
key does not operate.
engine and change the operation mode if the
• There is a F.A.S.T.-key in the passenger
key is in a storage space such as the glove
compartment
compartment, on top of the instrument panel,
• A door or the liftgate is open or ajar
or in the door pocket or luggage compart-
ment.
• The operation mode is not in OFF.
z
The time within which locking confirmation
is possible can be adjusted. See an autho-
rized Mitsubishi Motors dealer for details.
5-12
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
To unlock
NOTE
NOTE
z Settings can be changed so that all doors and
z
The amount of time after unlocking until the
While carrying the F.A.S.T.-key within the
the liftgate are unlocked automatically by
vehicle relocks automatically can be
pressing the driver’s door lock/unlock switch
adjusted. See an authorized Mitsubishi
operating range, you can unlock the doors
once.
Motors dealer for details.
and the liftgate by using the F.A.S.T.-key.
See an authorized Mitsubishi Motors dealer
z
In cases such as the following, the F.A.S.T.-
The dome light will turn on for 30 seconds.
for details.
key does not operate.
The turn signal lights will blink twice and the
• The operation mode is not in OFF.
buzzer will sound twice.
5
Press the liftgate lock/unlock switch (B) to
z
Functions settings can be modified as stated
unlock all the doors and the liftgate.
below.
Also refer to
“Door locks”,
“Power door
See an authorized Mitsubishi Motors dealer
locks” and “Liftgate” on pages 5-26, 5-27 and
for details.
5-29 respectively.
Liftgate lock/unlock switch
• Activating the operation confirmation func-
tion (blinking of the turn signal lights) only
Press the driver’s door lock/unlock switch
during locking, or only during unlocking.
(A) to unlock only the driver’s door.
• Deactivating the operation confirmation
Within about 2 seconds, press the
driver’s
function (blinking of the turn signal lights)
door lock/unlock switch one more
time to
and buzzer.
unlock all the doors and the liftgate.
• Modifying the number of blinks in the
operation confirmation function
(blinking
Driver’s door lock/unlock switch
of the turn signal lights).
• Making the buzzer sound when the
F.A.S.T.-key is removed from the passenger
compartment when all the doors and the
NOTE
liftgate are closed.
z
If the doors and the liftgate are unlocked
using the driver’s door lock/unlock switch
when all doors and the liftgate are locked
and no doors or the liftgate are opened
within about 30 seconds, the doors and the
liftgate will automatically re-lock.
Features and controls
5-13
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Engine switch
CAUTION
Operation mode of the engine
N00513501173
z
If the engine switch operation is not smooth
switch and its function
To prevent vehicle theft, no F.A.S.T.-keys
and feels like it is sticking, do not operate the
other than those registered in advance can be
switch.
Immediately
contact
an
authorized
OFF
used to start the engine. (Electronic immobi-
Mitsubishi Motors dealer.
lizer function)
The indicator light on the engine switch turns
While carrying the F.A.S.T.-key, the engine
off.
5
switch can be used to start the engine.
The operation mode cannot be put in OFF
NOTE
when the selector lever is in any position
z
When operating the engine switch, press the
other than the “P” (PARK) position.
switch all the way in. If the switch is not
fully pressed, the engine may not start or the
operation mode may not change. If the
ACC
engine switch is pressed correctly, there is no
need to hold the engine switch down.
Allows operation of some electrical accesso-
z
When the battery in the F.A.S.T.-key has
ries.
worn out, or taking the F.A.S.T.-key out of
The indicator light on the engine switch illu-
the vehicle, a warning lamp will blink for 5
minates orange.
seconds.
ON
All electrical accessories can be used.
CAUTION
The indicator light on the engine switch illu-
z
The indicator light
(A) will flash orange
minates green.
when there is a problem or malfunction in
Free-hand Advanced Security Transmitter.
The indicator light turns off when the engine
Never drive if the indicator light on the
is running.
engine switch is flashing orange. Immedi-
ately contact your authorized Mitsubishi
Motors dealer.
5-14
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
NOTE
CAUTION
NOTE
z Your vehicle is equipped with an electronic
z
When the engine is not running, put the oper-
2. One of the other causes could be low bat-
immobilizer. To start the engine, the ID code
ation mode in OFF. Leaving the operation
tery voltage. If this occurs, the keyless
which the F.A.S.T.-key sends must match the
mode in ON or ACC for a long time when
entry system and the F.A.S.T.-key opera-
one registered to the immobilizer computer.
the engine is not running may cause the bat-
tion will also not operate. Contact an
(Refer to “Electronic immobilizer (Anti-theft
tery to be discharged, making it impossible
authorized Mitsubishi Motors dealer.
starting system)” on page 5-21)
to start the engine.
z
When the battery is disconnected, the current
ACC power auto-cutout function
5
operation mode is memorized. After recon-
N00568101049
necting the battery, the memorized mode is
Changing the operation mode
selected automatically. Before disconnect-
When the vehicle is in ACC operation mode
N00568001178
ing the battery for repair or replacement,
for approximately
30 minutes, the ACC
If you press the engine switch without press-
make sure to put the operation mode in OFF.
power auto-cutout function automatically
ing the brake pedal while the vehicle is sta-
Be careful if you are not sure which opera-
cuts power to the audio system and other
tionary, you can change the operation mode
tion mode the vehicle is in when the battery
electronic devices that can be used during
in the order of OFF, ACC, ON, OFF.
is run down.
ACC operation mode.
z
The operation mode cannot be changed from
To enable power after ACC power auto-cut-
OFF to ACC or ON if the F.A.S.T.-key is not
out function, press the engine switch while in
detected to be in the vehicle. Refer to “Oper-
ACC.
ating range for starting the engine and
changing the operation mode” on page 5-12.
NOTE
z It is possible to modify the functions as fol-
NOTE
lows:
z
If the operation mode cannot be changed to
• The time until the power cuts out can be
OFF, perform the following procedure.
changed to approximately 60 minutes.
1. Move the selector lever to the
“P”
• The ACC power auto-cutout function can
(PARK) position, and then change the
be deactivated.
operation mode to OFF.
(For vehicles
For details, we recommend you to consult an
with continuously variable transmission
authorized Mitsubishi Motors dealer.
(CVT))
Features and controls
5-15
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Warning activation
Someone may be carrying a
F.A.S.T.-key take-out monitoring
F.A.S.T.-key with a different
N00503501271
system
ID code, or the F.A.S.T.-key
With the F.A.S.T.-key, warnings are given
N00559801196
may not be within the operat-
through buzzers and displayed symbols in
ing range
order to prevent mistaken operations or vehi-
cle theft.
Refer to “F.A.S.T.-key take-
When a warning operates, be sure to check
out monitoring system” on
When the operation mode is in any mode
5
the vehicle and the F.A.S.T.-key. A warning is
page 5-16.
other than OFF, and a door is opened and the
also shown if there is a problem in the
The battery of the F.A.S.T.-
F.A.S.T.-key is removed from the passenger
F.A.S.T.-key.
key is run down
compartment the ID codes of the F.A.S.T.-
key and the vehicle can no longer be verified.
If the following warning shows, contact an
When the door is closed, the warning light
authorized Mitsubishi Motors dealer.
z
A door or the liftgate cannot be locked
blinks and the buzzer sounds 4 times as a
even when the driver’s door lock/unlock
warning. If the vehicle starts, the inner buzzer
There is a problem in the
switch or the liftgate lock/unlock switch is
sounds once.
F.A.S.T.-key
pressed.
Put the operation mode in
NOTE
Refer to “Key lock-in preven-
OFF and then start the engine
z
The F.A.S.T.-key take-out monitoring system
tion system” on page 5-17.
again.
does not function if the F.A.S.T.-key is
If the warning is not can-
removed through a window without opening
Refer to “Door ajar preven-
celled, there is a fault in the
a door.
tion system” on page 5-17.
This setting can be changed.
electronic immobilizer (Anti-
See an authorized Mitsubishi Motors dealer
theft starting system).
Refer to “Operation mode
for details.
Please contact an authorized
OFF reminder system” on
z
The warning may display even if the
Mitsubishi Motors dealer.
page 5-17.
F.A.S.T.-key is in the operating range for
starting the engine and changing the opera-
If the following warnings show, the light goes
tion mode. The surrounding environment or
off if the correct action is taken.
electromagnetic waves may make it impossi-
ble to verify the ID codes of the F.A.S.T.-key
z The ID codes of the F.A.S.T.-key and the
and vehicle.
vehicle cannot be verified
5-16
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
If the engine does not start, wait for a
Key lock-in prevention system
Operation mode OFF reminder
while and then attempt to start the engine
N00559901171
system
again. Trying repeatedly with the starter
N00560101186
motor still turning will damage the starter
mechanism.
z
If the engine will not start because the bat-
When the operation mode is in OFF, the
tery is weak or discharged, refer to
F.A.S.T.-key is left in the passenger compart-
When the operation mode is in any mode
“Jump-starting the engine” on page 8-2
5
ment, all the doors and the liftgate are closed,
other than OFF, and someone tries to lock the
for instructions.
and someone tries to lock the vehicle by
vehicle by pressing the driver’s door
z
A longer warm up period will only con-
pressing the driver’s door lock/unlock switch
lock/unlock switch or the liftgate lock/unlock
sume extra fuel.
or the liftgate lock/unlock switch, the warn-
switch, the warning light blinks and the
The engine is warmed up enough for driv-
ing light blinks and the buzzer sounds for
buzzer sounds for about 3 seconds as a warn-
ing when the low coolant temperature
about 3 seconds as a warning, and the doors
ing, and the doors and the liftgate cannot be
indicator goes out.
and the liftgate cannot be locked.
locked.
Refer to “Low coolant temperature indi-
cator” on page 5-88.
Door ajar prevention system
Starting and stopping the
N00560001172
WARNING
engine
z
Never run the engine in a closed or poorly
N00514601403
ventilated area any longer than is needed
to move your vehicle out of the area. Car-
Tips for starting
bon monoxide gas, which is odorless and
When the operation mode is in OFF, and
extremely poisonous, could build up and
someone tries to lock the vehicle by pressing
z The operation mode can be in any mode
cause serious injury or death.
the driver’s door lock/unlock switch or the
to start the engine.
liftgate lock/unlock switch while one of the
z The starter motor will be turning for up to
doors or the liftgate is not fully closed, the
approximately 15 seconds if the engine
CAUTION
warning light blinks and the buzzer sounds
switch is released at once. Pressing the
z Do not push-start the vehicle.
for about 3 seconds as a warning, and the
engine switch again while the starter
z
Do not run the engine at high rpms or drive
doors and the liftgate cannot be locked.
motor is still turning will stop the starter
at high speeds until the engine has had a
motor. The starter motor will be turning
chance to warm up.
for up to approximately 30 seconds while
the engine switch is pressed.
Features and controls
5-17
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
3. If the engine still will not start, the engine
Starting the engine
NOTE
could be flooded with too much gasoline.
z The engine can only be started when the
While depressing the brake pedal, push
Your vehicle is equipped with an electroni-
selector lever is in the “P” (PARK) or “N”
the accelerator pedal all the way down
(NEUTRAL) position.
cally controlled fuel injection system. This is
and hold it there, then press the engine
For safety reasons, the engine should be
a system that automatically controls fuel
switch to crank the engine. If the engine
started when the selector lever is in the “P”
injection. There is usually no need to depress
(PARK) position in which the driving wheels
does not start after 5 to 6 seconds, push
the accelerator pedal when starting the
lock.
the engine switch to stop cranking the
5
engine.
engine, and release the accelerator pedal.
To prevent battery drain, wait a few seconds
Put the operation mode in OFF. Wait a
between attempts to restart the engine.
5. Press the engine switch.
few seconds, and then press the engine
6. Confirm that all warning lights and warn-
switch to crank the engine again while
1. Make sure all occupants are properly
ing displays are functioning properly.
depressing the brake pedal, but do not
seated with seat belts fastened.
push the accelerator pedal. If the engine
2. Make sure the parking brake is applied.
NOTE
fails to start, repeat these procedures. If
3. Press and hold the brake pedal down
z Minor noises may be heard on engine start-
the engine still will not start, contact your
firmly with your right foot.
up. These will disappear as the engine warms
local Mitsubishi Motors dealer or a repair
up.
facility of your choice for assistance.
NOTE
z After the engine has not started for a while,
When the engine is hard to start
Startability of continuously variable trans-
the brake pedal effort needed to start the
mission (CVT) vehicles with an ambient
engine may become greater. If this occurs,
After several attempts, you may experience
temperature of -4 °F (-20 °C) or lower
depress the brake pedal more firmly than
that the engine still does not start.
When the ambient temperature is -4 °F (-20
usual.
°C) or lower, it may not be possible to start
1. Make sure that all electric devices, such
from a standstill even with the selector lever
4. Make sure the selector lever is in the “P”
as lights, air conditioning blower and rear
in the
“D” (DRIVE) or “R” (REVERSE)
(PARK) position.
window defogger, are turned off.
position.
2. While depressing the brake pedal, press
This phenomenon occurs because the trans-
the accelerator pedal halfway and hold it
axle has not warmed up sufficiently; it does
there, then crank the engine. Release the
not indicate a problem. If this occurs, place
accelerator pedal, immediately after the
the selector lever in the “P” (PARK) position
engine starts.
and let the engine idle for at least 10 minutes.
5-18
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
The transaxle will warm up, and you will be
NOTE
If the F.A.S.T.-key is not operat-
able to start normally.
z Do not stop the engine with the selector lever
ing properly
Do not leave the vehicle during warm-up
in any position other than the “P” (PARK)
operation.
N00568301126
position. If the engine is stopped with the
Insert the F.A.S.T.-key into the key slot of the
selector lever in any position other than the
floor console. Starting the engine and chang-
Stopping the engine
“P” (PARK) position, the operation mode
ing the operation mode should be now possi-
N00568201037
will go to ACC rather than OFF.
ble.
Put the operation mode in OFF after placing
Remove the F.A.S.T.-key from the key slot
5
WARNING
the selector lever in the “P” (PARK) posi-
tion.
after starting the engine or changing the oper-
z Do not operate the engine switch while
ation mode.
driving except in an emergency. If the
1. Stop the vehicle.
engine is stopped while driving, the brake
2. Fully engage the parking brake while
servomechanism will cease to function and
depressing the brake pedal.
braking efficiency will deteriorate. Also,
the power steering system will not func-
3. Move the selector lever to the
“P”
tion and it will require greater manual
(PARK) position, and then press the
effort to operate the steering. This could
engine switch to stop the engine.
result in a serious accident.
NOTE
z If you have to bring the engine to an emer-
gency stop while driving, press and hold the
engine switch for 3 seconds or more, or press
it quickly 3 times or more. The engine will
NOTE
stop and the operation mode will go to ACC.
z Do not insert into the key slot anything other
than the F.A.S.T.-key. This could cause dam-
age or a malfunction.
Features and controls
5-19
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
NOTE
To operate without using the
NOTE
z Remove the object or additional key from the
F.A.S.T.-key
z Only use the emergency key in an emer-
F.A.S.T.-key before inserting the key into the
gency. When the battery of the F.A.S.T.-key
N00514800017
key slot. The vehicle may not be able to
has run down, replace the battery as soon as
receive the registered ID code from the regis-
possible and use it as a F.A.S.T.-key again.
Emergency key
tered key. Therefore, the engine may not start
z After using the emergency key, be sure to
and the operation mode may not change.
N00515201174
reinsert it into the F.A.S.T.-key.
z The F.A.S.T.-key is fixed in the key slot
The emergency key is built into the F.A.S.T.-
5
when inserted in the illustrated direction.
key.
Locking and unlocking the passenger’s
Simply pull out the key to remove it from the
When the F.A.S.T.-key cannot be used, such
door
key slot.
as when the battery of the F.A.S.T.-key or the
vehicle has run down, the emergency key can
Turn the emergency key toward the front of
F.A.S.T.-key reminder
be used to lock and unlock the passenger’s
the vehicle to lock the door. After checking
door.
that the door is locked, turn the emergency
key back to the center and remove it.
To use the emergency key (A), unlock the
lock knob
(B) and remove it from the
F.A.S.T.-key (C).
If the operation mode is in OFF and the
driver’s door is opened with the F.A.S.T.-key
in the key slot, a warning is issued with the
warning light and the buzzer buzzing for
approximately 3 seconds to remind you to
remove the key.
1- Lock
2- Unlock
5-20
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
tered) F.A.S.T.-keys and blank
(not regis-
Electronic immobilizer (Anti-
Additional F.A.S.T.-keys
tered) F.A.S.T.-key.
N00561100056
theft starting system)
N00529600055
To add a F.A.S.T.-key, you must already have
For F.A.S.T.-key programming, follow the
2 registered F.A.S.T.-keys. You need to regis-
procedures below.
The electronic immobilizer is designed to sig-
ter the ID code to the vehicle.
nificantly reduce the possibility of vehicle
Registering the ID code can be done by your
1. Open the driver’s door.
theft. The purpose of the system is to immo-
authorized Mitsubishi Motors dealer. Or it
bilize the vehicle if an invalid start is
can be done by yourself (except for vehicles
NOTE
5
attempted. A valid start attempt can only be
sold in Canada).
z Keep the driver’s door open until F.A.S.T.-
achieved (subject to certain conditions) using
For you to register the ID code yourself, fol-
key programming is finished. Do not open or
a F.A.S.T.-Key “registered” to the immobi-
close other doors.
low the
“Customer F.A.S.T.-key program-
lizer system.
ming” procedure below.
All of the keys provided with your new vehi-
If you choose to have your authorized
2. While carrying the first valid F.A.S.T.-
cle have been programmed to the vehicle’s
Mitsubishi Motors dealer register the ID
key, put the operation mode in ON. (Per-
electronics.
code, take your vehicle and all remaining
form the following procedure within 30
F.A.S.T.-keys to your authorized Mitsubishi
seconds.)
Replacement F.A.S.T.-keys
Motors dealer.
3. Insert the new F.A.S.T.-key into the key
N00561000042
slot.
Only the F.A.S.T.-keys that have been pro-
NOTE
grammed to the vehicle’s electronics can be
z You are provided with 2 F.A.S.T.-keys, but
used to start the vehicle.
you may register up to 4 F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys for your
If you lose the F.A.S.T.-key, you can order a
vehicle from your Mitsubishi Motors dealer.
F.A.S.T.-key from your authorized Mitsubishi
Motors dealer by referring to the key number.
To prevent vehicle theft, take your vehicle
Customer F.A.S.T.-key program-
and the remaining F.A.S.T.-keys to an autho-
ming (Except for vehicles sold in
rized Mitsubishi Motors dealer to have the ID
codes reprogrammed.
Canada)
N00561201272
4. With the first valid F.A.S.T.-key, press the
You can program new F.A.S.T.-keys to the
UNLOCK button for 4 to 10 seconds and
system if you have two valid (already regis-
press the LOCK button during this time.
Features and controls
5-21
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5. Release in sequence the LOCK and
8. If you wish to register another F.A.S.T.-
UNLOCK buttons within 10 seconds of
key, repeat the process from step 1 after
pressing the LOCK button in step 4. (Per-
the operation mode is put in OFF.
form the following procedure within 30
9. When all F.A.S.T.-keys are registered,
seconds.)
remove the F.A.S.T.-key from the key
6. With the second valid F.A.S.T.-key, press
slot.
the UNLOCK button for 4 to 10 seconds
and press the LOCK button during this
NOTE
5
time.
z The immobilizer display will go off immedi-
7. Release in sequence the LOCK and
ately if the operation mode is put in OFF.
UNLOCK buttons within 10 seconds of
z It is not possible to register a F.A.S.T.-key if
pressing the LOCK button in step 6. The
the immobilizer warning light goes off dur-
1-
LOCK (
) button
immobilizer warning light will blink.
ing the procedure.
2-
UNLOCK (
) button
3-
PANIC button
4-
Operation indicator light
Keyless entry system
N00515501438
Press the remote control transmitter buttons
To lock
to lock or unlock the doors and the liftgate.
When registration of ID code is complete,
It can also help you signal for attention by
Press the LOCK button (1) to lock
all the
the buzzer will sound 3 times and the
setting off the panic alarm.
doors and the liftgate.
immobilizer indicator will come on for 30
The turn signal lights will also blink once.
seconds.
If an error occurs, F.A.S.T.-key program-
NOTE
ming will be terminated and the buzzer
will sound for 3 seconds.
z If you press the LOCK button (1) twice, the
horn will sound once.
NOTE
z F.A.S.T.-key programming will be termi-
nated if the operation mode is put in OFF
To unlock
before the immobilizer warning light starts
Press the UNLOCK button (2) to unlock the
blinking.
driver’s door only.
5-22
Features and controls
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Within about 2 seconds, press the UNLOCK
1. Put the operation mode in OFF.
condition of the door and liftgate unlock
button one more time to unlock all the doors
2. Open the driver’s door and turn the com-
function.
and liftgate.
bination headlights and dimmer switch to
The dome light will turn on for 30 seconds.
the “OFF” position.
Number of
Condition
The turn signal lights will also blink twice.
3. Press the LOCK button (1) for 4 to 10 sec-
chimes
The front side-marker and parking lights will
onds and press the UNLOCK button (2)
All doors and the liftgate
also turn on for approximately 30 seconds.
during this time.
One chime
unlock
Refer to “Welcome light” on page 5-97.
4. Release in sequence the UNLOCK and
Two chimes
Driver’s door unlock only
5
LOCK buttons within
10 seconds of
pressing the UNLOCK button in step 3.
NOTE
1. Put the operation mode in OFF.
z The door and liftgate unlock function can be
2. Open the driver’s door and turn the com-
set so that all doors and liftgate unlock when
Turn signal light deactivation/reactiva-
bination headlights and dimmer switch to
the UNLOCK button (2) is pressed once.
tion
Refer to “Setting of door and liftgate unlock
the “OFF” position.
function” on page 5-23.
The turn signal lights answerback function
3. Press the LOCK button (1) for 4 to 10 sec-
can be changes.
onds and press the UNLOCK button (2)
If you want to change the answerback func-
during this time.
Answerback function
tion, please contact an authorized Mitsubishi
4. Release in sequence the LOCK and
Motors dealer.
UNLOCK buttons within 10 seconds of
The horn of the keyless entry system answer-
pressing the LOCK button in step 3.
back function can be changed as required.
Buzzer deactivation/reactivation
This is done with the operation mode in OFF.
Using the panic alarm
The buzzer answerback function can be
N00544701168
Horn deactivation/reactivation
turned ON or OFF as required.
If you are near your vehicle and feel threat-
The answerback function can be set in the
ened, you can activate the alarm to call atten-
following three ways.
Setting of door and liftgate unlock
tion as follows:
function
One chime: The horn will not sound.
1. Press the PANIC button (3) for more than
N00544600098
Two chimes: The horn will sound.
1 second.
The door and liftgate unlock function can be
Four chimes: The horn will sound if the
2. The headlights will blink on and off and
set to the following two conditions.
LOCK button is pressed twice
the horn will sound intermittently for
Each time the door and liftgate unlock func-
within 1 second.
about 3 minutes.
tion is set, a chime will sound to tell you the
Features and controls
5-23

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..