Mitsubishi Outlander XL. Manual - part 721

REMOVAL AND INSTALLATION. . . .

42Ab-110

42Ab-3

SPECIFICATION(S)

SERVICE SPECIFICATION

M14203000003USA0000010000

ITEM

STANDARD VALUE

Door inside handle lock knob stroke mm (in) [Target value: mm (in)] 13.7 - 15.0 (0.54 - 0.59) [14.7 (0.58)]
Door inside handle play mm (in)
[Target value: mm (in)]

Driver’s side

10.0 - 23.7 (0.39 - 0.93) [17.0 (0.67)]

Except for driver’s side

5.0 - 18.7 (0.2 - 0.74) [12.0 (0.47)]

Door outside handle play mm (in) [Target value: mm (in)]

0.1 - 5.2 (0.004 - 0.2) [2.5 (0.1)]

Power window operation current A

7  ±  1  [Power  supply  voltage  14.5  ±
0.5V at 25°C (77°F)]

SEALANT

M14203000005USA0000010000

ITEM

SPECIFIED SEALANT

REMARK

Waterproof film

3  M™AAD  Part  No.  8633  or
equivalent

Ribbon sealer

COMPONENT IDENTIFICATIONS

M14203000985USA0000010000

<DOOR CHECK>

Applicable location

Identification mark

Front door

Left door

55L

Right door

55R

Rear door

Left door

58L

Right door

58R

<DOOR OPENING OUTER WEATHERSTRIP>

Applicable side

Identification clip color

Left door

White

Right door

Pink

GENERAL INFORMATION

M14203000001USA0000010000

CENTRAL DOOR LOCKING SYSTEM

The  central  door  locking  system  operates  the  door
lock actuator to lock or unlock the doors and liftgate
using the door lock switch built into the front power
window  (main  or  sub)  switch  or  key  cylinder.  The
system has the following operations and features:

｠

All doors and liftgate can be locked using the door
lock switch built into the front power window (main
or sub RH) switch.

｠

Insert the key into the driver's key cylinder and turn
once to the unlock side to unlock the driver's door.

Turn the key once again to the unlock side to unlock
all doors and liftgate.

｠

The key reminder function automatically unlocks all
doors  and  liftgate  when  door  lock  operation  is
performed and the front doors are opened while the
key is inserted into the ignition switch.

42Ab-4

DOOR

SPECIFICATION(S)

CENTRAL DOOR LOCKING OPERATION
The function that allows the driver's door to be opened
by pulling the driver's door inside handle even when
the driver's door inside lock knob is in the lock position
is called "override function".

ZC6001350001

t

t

ON

OFF

ON

OFF

ON

OFF

ON

OFF

t: 0.25 second

Lock switch

Lock relay output

Unlock relay output

Unlock switch

When the driver's door is locked by turning the door
lock key cylinder to the lock side (when the lock switch
turns ON after turning OFF the unlock switch in the
driver's  door  lock  actuator),  ETACS-ECU  turns  ON
the  lock  relay  output  for  0.25  second,  and  locks  all
doors (including the liftgate). When the driver's door
is unlocked by turning the door lock key cylinder to the
unlock side (when the unlock switch turns ON after
turning OFF the lock switch on the driver's door lock
actuator),  ETACS-ECU  turns  ON  the  unlock  relay
output  for  0.25  second,  and  unlocks  all  doors
(including the liftgate).

ZC600257

t

ON

(LOCK)

ON

(UNLOCK)

ON

OFF

ON

OFF

Driver's or 
passenger's 
door lock 
switch

Unlock relay 
output

Lock relay 
output

t: 0.25 Second

t

t

Time lag

t

t

OFF

LOCK

UNLOCK

All doors
lock 
actuator

0001

When the door is locked by the driver’s or passenger’s
door lock switch, the ETACS-ECU operates its door
lock relay and passes a current through the door lock
actuators  of  all  the  doors  (including  the  liftgate)  for
0.25  second  to  lock  all  the  doors  (including  the
liftgate).
When  the  door  is  unlocked  by  the  driver’s  or
passenger's  door  lock  switch,  the  ETACS-ECU
operates its door unlock relay and passes a current
through  the  door  lock  actuators  of  all  the  doors
(including the liftgate) for 0.25 second to unlock all the
doors (including the liftgate).
When the door is locked and unlocked by driver’s or
passenger's  door  lock  switch  consecutively,  the
ETACS-ECU operates its door lock relay and passes
a  current  through  the  door  lock  actuators  of  all  the
doors (including the liftgate) for 0.25 second to lock all
the doors (including the liftgate). Then, the ETACS-
ECU  operates  its  door  unlock  relay  and  passes  a
current through the door lock actuators of all the doors
(including the liftgate) for 0.25 second to unlock all the
doors (including the liftgate). Due to this, there may be
a time lag between the driver’s or passenger's door
lock switch actuation and the time when all the doors
(including the liftgate) are unlocked.

SELECTOR "P" POSITION-LINKED DOOR
UNLOCKING FUNCTION
When the selector lever is shifted to the "P" (parking)
position  with  the  ignition  switch  turned  ON,  all  the
doors  (including  the  liftgate)  will  be  unlocked
automatically, improving passengers' convenience for
getting  out.  Using  a  customization  feature,  the
selector  "P"  position-linked  door  unlocking  function
can be switched (Refer to P.42Ab-94).

ZC6001360001

t

T

ON

OFF

ON

OFF

Inhibiter switch "P"

Unlock relay output

t: 0.25 second
T: 0.3 second

DOOR

42Ab-5

GENERAL INFORMATION

When the selector lever is shifted to the P position with
the  ignition  switch  turned  ON,  the  transaxle  range
switch  "P"  turns  ON,  ETACS-ECU  turns  the  unlock
relay  output  ON  for  0.25  seconds  to  unlock  all  the
doors (including the liftgate).

LIFTGATE OPENER CONTROL FUNCTION

ZC6001420001

ON

OFF

UNLOCK

LOCK

ON

OFF

t

t: 0.3 second

0km/h

Liftgate

Vehicle speed

Liftgate lock
release handle
switch

Unlock relay output

When the liftgate lock release handle is operated to
open  the  liftgate  (the  liftgate  lock  release  handle
switch turns ON) while the vehicle is parked and the
liftgate  is  unlocked,  ETACS-ECU  turns  the  unlock
relay output ON for 0.3 seconds, thus the liftgate can
be opened by the liftgate lock release handle.

42Ab-6

DOOR

GENERAL INFORMATION