Mitsubishi Outlander GS45X. Manual - part 206

ETACS

TSB Revision

CHASSIS ELECTRICAL

54A-821

ON-VEHICLE SERVICE

CUSTOMIZATION FUNCTION

M1545002501378

Using the ETACS system of scan tool MB991958, 
the following functions can be programmed. The pro-
grammed information is held even when the battery 
is disconnected.

Adjustment 
item (scan tool 
MB991958 
display)

Adjustment item

Adjusting contents 
(scan tool MB991958 
display)

Adjusting contents

ACC power 
auto cut

Time to ACC power 
cut-off when the 
ignition switch is in 
the ACC position

Disable

No function

30 min

30 minutes (initial condition)

60 min

60 minutes

Turn power 
source

Adjustment of 
turn-signal light 
operation condition

ACC or IG1

Operable with ACC or ON position

IG1

Operable with ON position (initial 
condition)

Comfort flasher With/without 

comfort flasher 
function

Disable

Without function

Enable

With function (initial condition)

Comfort flasher 
switch time

Switch operation 
time to activate the 
comfort flasher 
function

Normal

0.4 second (initial condition)

Long

0.8 second

Hazard answer 
back

Adjustment of the 
number of keyless 
hazard warning light 
answer back 
flashes

Lock:1, Unlock:2

LOCK: Flashes once, UNLOCK: Flashes 
twice (initial condition)

Lock:1, Unlock:0

LOCK: Flashes once, UNLOCK: No flash

Lock:0, Unlock:2

LOCK: No flash, UNLOCK: Flash twice

Lock:2, Unlock:1

LOCK: Flash twice, UNLOCK: Flash once

Lock:2, Unlock:0

LOCK: Flash twice, UNLOCK: No flash

Lock:0, Unlock:1

LOCK: No flash, UNLOCK: Flash once

Lock:0, Unlock:0

Without function

ETACS

TSB Revision

CHASSIS ELECTRICAL

54A-822

Front wiper 
operation

Adjustment of the 
intermittent 
windshield wiper 
operation <vehicles 
without auto light>

Normal INT

Intermittent wiper interval is fixed to 4 
seconds.

Variable INT

Intermittent wiper interval is calculated only 
by the wiper volume control.

Speed Sensitive

Intermittent wiper interval is calculated 
according to the intermittent wiper volume 
control and vehicle speed (initial 
condition).

Adjustment of the 
intermittent 
windshield wiper 
operation <vehicles 
with auto light>

Normal INT

Intermittent wiper interval is fixed to 4 
seconds.

Variable INT

Intermittent wiper interval is calculated only 
by the wiper volume control.

Speed Sensitive

Intermittent wiper interval is calculated 
according to the intermittent wiper volume 
control and vehicle speed.

Rain Sensitive

Intermittent wiper interval is calculated 
according to the intermittent wiper volume 
control and lighting control sensor (initial 
condition).

Front wiper 
washer

Disabling or 
enabling 
washer-linked wiper 
function

Only Washer

No function

Washer & Wiper

With function: Without delayed finishing 
wipe function (Initial condition)

With after wipe

With function: With delayed finishing wipe 
function

Intelligent 
washer

With/without 
intelligent washer 
function

Disable

No function

Enable

With function (initial condition)

Intermittent time 
of rear wiper

Adjustment of rear 
wiper interval

0 sec

No wiper interval

4 sec

4 seconds

8 sec

8 seconds (initial condition)

16 sec

16 seconds

Rear wiper low 
speed mode

Disabling or 
enabling rear wiper 
continuous 
operation

Disabled

Without function

Enabled

With function (initial condition)

Rear wiper 
(linked  
activated when 
in reverse

Adjustment of 
automatic rear 
window wiper 
operation with 
reverse gear 
engaged

Enable(R wip.ON)

Operates only when the rear wiper switch 
is ON.

Enable(R/F wip.)

Operates only when the front or rear wiper 
switch is ON (initial condition).

Adjustment 
item (scan tool 
MB991958 
display)

Adjustment item

Adjusting contents 
(scan tool MB991958 
display)

Adjusting contents

ETACS

TSB Revision

CHASSIS ELECTRICAL

54A-823

Sensitivity for 
auto light

Lighting control 
sensor sensitivity 
(illumination 
intensity) <vehicles 
with auto light>

Level 1 bright

High-high ambient brightness

Level 2 bright

High ambient brightness

Level 3

Standard ambient brightness (initial 
condition)

Level 4 dark

Low ambient brightness

Level 5 dark

Low-low ambient brightness

Dome light 
delay timer with 
door

Adjustment of 
interior light delay 
shutdown time

0 sec

0 second (no delay shutdown time)

7.5 sec

7.5 seconds

15 sec

15 seconds

30 sec

30 seconds (initial condition)

60 sec

60 seconds

120 sec

120 seconds

180 sec

180 seconds

Headlight auto 
cut customize

Adjustment of 
headlight automatic 
shutdown function

Disable

Without function

Enable (C-spec.).

With function (initial condition)

Welcome light

Disabling or 
enabling welcome 
light function

Disabled

No function

Small light

Tail light illuminates. (initial condition)

Head light

Headlight illuminates.

Coming home 
light

Disabling or 
enabling coming 
home light function

Disabled

No function

15 sec

Headlight illuminates for 15 seconds.

30sec

Headlight illuminates for 30 seconds. 
(initial condition)

60 sec

Headlight illuminates for 60 seconds.

180 sec

Headlight illuminates for 180 seconds.

Interior light 
auto cut timer

Adjustment of 
interior light 
automatic shutdown 
function operation 
time

Disabled

Without function

3 min

3 minutes

30 min

30 minutes (initial condition)

60 min

60 minutes

Door unlock 
mode

Adjustment of 
power door locks 
with selective 
unlocking

All doors unlock

Without function: The first operation of 
keyless entry system or unlock operation 
by KOS unlocks all doors.

Dr door unlock

With function: The first operation of 
keyless entry system or unlock operation 
by KOS unlocks the driver's door only, and 
the second unlock operation within 2 
seconds after that unlocks all doors. (initial 
condition)

Adjustment 
item (scan tool 
MB991958 
display)

Adjustment item

Adjusting contents 
(scan tool MB991958 
display)

Adjusting contents

ETACS

TSB Revision

CHASSIS ELECTRICAL

54A-824

Auto door 
unlock

Adjustment of the 
auto door unlock 
function

Disabled

Without function (initial condition)

Always (P pos)

With function: Operates when the shift 
lever or the selector lever is moved to the 
P position.

Always(Lock pos)

With function: Operates when the ignition 
switch is moved to the LOCK (OFF) 
position.

Duration of horn 
chirp

Horn sounding time 
during horn answer 
back

Short

0.01 second (initial condition)

Long

0.02 second

Sensitivity for 
theft sensor

Sensitivity level 
setting of 
theft-alarm sensor 
<Vehicles with 
theft-alarm sensor>

Level 1

100% sensitivity of theft-alarm sensor 
(initial condition)

Level 2

90% sensitivity of theft-alarm sensor

Level 3

80% sensitivity of theft-alarm sensor

Level 4

70% sensitivity of theft-alarm sensor

Horn chirp by 
keyless

Horn chirp by 
keyless entry 
system <vehicles 
without auto light>

Not sound horn

No horn answerback function

Lock any time

The horn sounds when the lock button of 
keyless entry transmitter is pressed once.

W lock any time

The horn sounds when the lock button of 
keyless entry transmitter is pressed twice. 
(initial condition)

Horn chirp by 
keyless entry 
system <vehicles 
with auto light>

Not sound horn

No horn answerback function

Lock any time

The horn sounds when the lock button of 
keyless entry transmitter is pressed once.

Lock/auto ON

During daytime, while the lighting switch is 
in the AUTO position, the horn sounds 
once when the lock is pressed once.

W lock any time

The horn sounds when the lock button of 
keyless entry transmitter is pressed twice. 
(initial condition)

Buzzer answer 
back

Adjusts the tone 
alarm answer back 
function.

Not sound tone alarm

Without function

At keyless

Sounds when the keyless entry system is 
activated.

At F.A.S.T.

*

Sounds when KOS is activated (initial 
condition).

At Both

Sounds when the keyless entry system or 
KOS is activated.

Timer lock timer Timer lock period 

adjustment

30 sec

30 seconds (initial condition)

60 sec

60 seconds

120 sec

120 seconds

180 sec

180 seconds

Adjustment 
item (scan tool 
MB991958 
display)

Adjustment item

Adjusting contents 
(scan tool MB991958 
display)

Adjusting contents