|
|
Content .. 1188 1189 1190 1191 ..
HOW TO USE THIS MANUAL TSB Revision GENERAL 00-3 HOW TO USE THIS MANUAL M1001000102763 MAINTENANCE, REPAIR AND This manual provides explanations, etc. concerning . ON-VEHICLE SERVICE The "ON-VEHICLE SERVICE" section has proce- . SERVICE PROCEDURES The service steps are arranged in numerical order. DEFINITION OF TERMS . STANDARD VALUE Indicates the value used as the standard for judging . LIMIT Shows the maximum or minimum value for judging . REFERENCE VALUE Indicates the adjustment value prior to starting the . DANGER, WARNING, AND CAUTION DANGER, WARNING, and CAUTION call special • If a DANGER is not followed, the result is severe bodily harm or even death. • If a WARNING is not followed, the result could be bodily injury. • If a CAUTION is not followed, the result could be damage to the vehicle, vehicle components or TIGHTENING TORQUE INDICATION The tightening torque indicates a median and its tol- ⋅m (in-lb) or N⋅m (ft-lb). For fas- teners with no assigned torque value, refer to SPECIAL TOOL NOTE Only MMC special tool part numbers are called out in ABBREVIATIONS The following abbreviations are used in this manual . • 2.4L Engine: 2.359 cm 3 4B12 engine, or a model equipped with such an engine. • 3.0L Engine: 2.998 cm 3 6B31 engine, or a model equipped with such an engine. • A/C: Air conditioning. • A/T: Automatic transaxle, or models equipped • AWD: All wheel drive vehicles. • CVT: Indicates the continuously variable tran- • FWD: Front wheel drive vehicles. • Keyless Operation System (KOS): Free-hand • LIN: Local interconnect network • MFI: Multiport fuel injection, or engines equipped • ECM: Indicates the engine control module • TCM: Indicates the transaxle control module |