|
|
TROUBLESHOOTING ACTIVE STABILITY CONTROL SYSTEM (ASC) 35C-11 NOTE: . • *1 : Turns on when two or more wheels are faulty. • *2 : Stays on until the vehicle speed reaches 10 km/h when the ignition switch is turned to ON next time. • *3 : 2WD. • *4 : 4WD. • *5 : Does not illuminate when there is no effect to the EBD function. • *6 : Does not illuminate when there is no effect to the ABS function. • *7 : May not illuminate in some trouble causes. • *8 : Stays on until the vehicle speed 20 km/h or higher and turn left or right when the ignition switch is turned to on next time. C1392 Incomplete learn (Longitudinal ON ON ON ON C1393 Incomplete learn neutral(Lateral ON ON ON ON C2204 Sensor cluster internal error OFF OFF *3 ON *4, 6 ON *8 ON *8 C1219 Steering angle sensor signal OFF OFF ON *8 ON *8 C121A SAS Steering wheel ON ON ON ON C2205 SAS internal error OFF OFF ON ON C2002 Valve calibration not completed OFF ON ON ON C1608 EEPROM fail OFF OFF OFF OFF C1707 Implausible coding data OFF ON *7 ON ON *7 U0100 Engine CAN timeout OFF OFF ON ON U0101 T/M CAN timeout OFF OFF ON ON U0114 *4 4WD CAN timeout OFF OFF ON ON U0126 SAS CAN timeout OFF OFF ON ON U0141 ETACS CAN timeout OFF OFF ON *7 ON U0401 Engine (CAN message) OFF OFF ON ON U0428 SAS (CAN message) OFF OFF ON ON U1073 Bus-off OFF OFF ON ON U1195 Coding not completed OFF ON ON ON U1197 Coding data unavailable OFF ON ON ON Diagnosis Item Brake
brake ABS warning
ABS warning ASC warning
ASC warning ASC OFF |