Mitsubishi Outlander (2013+). Manual - part 187

 

  Index      Mitsubishi     Mitsubishi Outlander - service repair manual 2013 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  185  186  187  188   ..

 

 

Mitsubishi Outlander (2013+). Manual - part 187

 

 

SYSTEM OPERATION

KEYLESS OPERATION SYSTEM (KOS)

42B-16

POWER DOOR LOCKS WITH SELECTIVE 
UNLOCKING 

• Responding to the adoption of power door locks 

with selective unlocking, the anti-theft feature has 
been improved.

• When the lock/unlock switch of front door 

(driver's side) is pressed once, only the driver's 
door is unlocked. When the lock/unlock switch of 
front door (driver's side) is pressed once again 
within 2 seconds after the driver's door is 
unlocked, the front passenger's door, rear doors, 
and the tailgate are unlocked.

NOTE: When the lock/unlock switch of front door 

(driver's side) is pressed once, only the driver's 
door is unlocked. When the lock/unlock switch of 
front door (driver's side) is pressed once again 
more than 2 seconds after the driver's door is 
unlocked, the driver's door only is unlocked.

• When the unlock switch on the keyless operation 

key is pressed once, only the driver's door is 
unlocked. When the keyless operation key unlock 
switch is pressed once again within 2 seconds 
after the driver's door is unlocked, the front pas-
senger's door, rear doors, and the tailgate are 
unlocked.

NOTE: When the keyless operation key unlock 

switch is pressed once, only the driver's door is 
unlocked. When the keyless operation key unlock 
switch is pressed once again more than 2 sec-
onds after the driver's door is unlocked, the 
driver's door only is unlocked.

• Using a customisation function, the power door 

locks with selective unlocking can be enabled or 
disabled (Refer to 

P.42B-31

).

ENCRYPTED CODE

Function

Keyless operation key operation

System operation

Standard function 
(lock/unlock/electri
c tailgate <vehicles 
with electric 
tailgate>)

Press the lock switch once.

All doors (including the tailgate) are 
locked.

NOTE: If the retracting function of the 
electric folding mirrors is added using a 
customisation function, it can be retracted 
in synchronisation with a lock operation.

Press the unlock switch once.

All doors (including the tailgate) are 
unlocked.

NOTE: If the opening function of the 
electrical folding mirrors is added as an 
adjustment function, it can be opened in 
synchronisation with an unlock operation.

While the tailgate is unlocked, press the 
electric tailgate switch twice within two 
seconds.

The electric tailgate is opened or closed. 
(Refer to GROUP 42A 

− Electric Tailgate 

P.42A-17

.)

Multi mode 
function <Vehicles 
with 
electric-folding 
door mirrors>

Press the lock switch once to lock all doors 
(including the tailgate), and within 30 
seconds press the lock switch twice 
consecutively.

The door mirrors are retracted.

Press the unlock switch once to unlock all 
doors (including the tailgate), and within 
30 seconds press the unlock switch twice 
consecutively.

The door mirrors return from the retracted 
position.

Power door locks 
with selective 
unlocking

Press the unlock switch once to unlock the 
driver’s door, and within 2 seconds, press 
the unlock switch again to unlock the front 
passenger’s door, rear doors and tailgate.

Power door locks with selective unlocking.

NOTE: Using a customisation function, the 
power door locks with selective unlocking 
can be enabled or disabled.

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

SYSTEM OPERATION

KEYLESS OPERATION SYSTEM (KOS)

42B-17

Four data codes are transmitted when a switch is 
operated once. The encrypted code for user identifi-
cation is a combination of 0 and 1, and more than 1 
million different combinations are available. To pre-
vent theft by copying signal codes, the data code 
includes a rolling code with the encrypted code. The 
rolling code changes each time a signal is sent.

RECEIVER

The receiver is incorporated into the KOS-ECU 
together with the receiving antenna. The receiver 
compares the signal which the antenna received 
from the keyless operation key with the registered 
encrypted code and the stored code of the receiver, 
and when they coincided, outputs a signal from the 
KOS-ECU. By connecting M.U.T.-III to the diagnosis 
connector, up to four encrypted codes of keyless 
operation keys can be registered.

KEYLESS ENTRY HAZARD LAMP 
ANSWERBACK FUNCTION

The hazard answerback function that allows check-
ing the lock/unlock state of the door easily even in 
the daytime is installed. When the LOCK signal from 
the keyless operation key is input to ETACS-ECU, all 
doors (including tailgate) are locked and the hazard 
warning lamp flashes once. When UNLOCK signal is 
input, all doors (including tailgate) are unlocked and 
the hazard warning lamp flashes twice. Using a cus-
tomisation function, the hazard answerback can be 
enabled/disabled (Refer to 

P.42B-31

).

KEYLESS ENTRY ROOM LAMP ANSWER-BACK FUNCTION

AC508281AB

ON

OFF

Transmitter lock or unlock button

Data
code

AC207001AB

ON

OFF

OFF

ON

OFF

LOCK

UNLOCK

Illuminate

Extinguish

Keyless entry
transmitter 
switch

Lock relay output

Unlock relay output

Hazard
warning lamp

AC612545AB

ON

OFF

ON

OFF

ON

OFF

ON

OFF

a

a: 0.25 second
b: 0.72 second
c: 2 seconds

d: 3 seconds
e: 15 seconds

a

b

d

b

b

c

d

e

Illuminate

Extinguish

Illuminate

Extinguish

Lock relay output

Unlock relay output

Lock switch output

Unlock switch output

Room lamp

Hazard

warning lamp

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

SYSTEM OPERATION

KEYLESS OPERATION SYSTEM (KOS)

42B-18

 When the LOCK signal from the keyless operation 
key is input to ETACS-ECU, all doors (including tail-
gate) are locked, and the room lamp is turned off in 
synchronisation with hazard lamp answerback (when 
the room lamp is illuminated, the lamp is turned off). 
Also, when the UNLOCK signal from the keyless 
operation key is input to ETACS-ECU, all doors 
(including tailgate) are unlocked, and the room lamp 
is illuminated for 15 seconds in synchronisation with 
hazard lamp answerback.

KEYLESS ENTRY TIMER LOCK TIME

When none of the doors is opened within 30 seconds 
after the doors are unlocked by the keyless entry 
system, ETACS-ECU automatically outputs the door 
lock signal to lock the doors. This function prevents 
the doors (including the tailgate) from being unlocked 
unexpectedly by operation errors. Using a customi-
sation function, the timer lock period can be changed 
(Refer to 

P.42B-31

).

OPERATION INHIBITION CONDITIONS

The operation of the system is inhibited when:

• Any door or the tailgate is open (door switch is 

ON). (including door ajar) <Lock function only>

OSS (ONE-TOUCH START SYSTEM)

M2421001200027

With the one-touch start system, when the engine 
switch mounted inside the vehicle is operated, 
OSS-ECU receives the stop lamp switch input signal 
from the brake pedal, the P range detection switch 
input signal from the selector lever assembly, and 
performs the certification communication with key-
less operation key using KOS-ECU, the certification 
communication with electric steering lock, and the 
engine start certification communication with 
engine-ECU. Only when the input signals and certifi-
cation communications are valid, the one-touch start 
system performs the power supply changeover con-
trol, the electric steering lock locking/unlocking con-
trol, and the engine start control.

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

SYSTEM OPERATION

KEYLESS OPERATION SYSTEM (KOS)

42B-19

ONE-TOUCH START SYSTEM 
CONFIGURATION

ONE-TOUCH START SYSTEM VALID 
AREA

The one-touch start system can be activated by the 
pressing of engine switch only when the keyless 
operation key is located within the interior antenna 
receiving area.

ACB05954

Keyless operation key

(ACC Output)

IG1 relay

(IG1 Output)

(Starter Output)

Key slot

Engine switch

Brake pedal
(Stop lamp switch)

Selector lever assembly
(P range detection switch)

KOS-ECU

OSS-ECU

ETACS-ECU

Starter relay 
drive circuit

Engine-ECU

AB

Frequency
signal

Frequency
signal

Interior/Exterior 
transmitter antenna 
assembly

Receiver antenna

Electric
steering lock

LIN
(Local)

Power supply 
for electric 
steering lock unit 
activation

Back-up 
power supply 
for KOS-ECU

Permission 
signal for 
actuator 
activation

Combination meter

CAN-C-Mid

CAN-C

CAN-C-Mid

CAN-C-Mid

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

 

 

 

 

 

 

 

Content   ..  185  186  187  188   ..