Mitsubishi Montero Sport (2004+). Manual - part 436
SPECIFICATIONS
TSB Revision
REAR AXLE
27-45
SERVICE SPECIFICATIONS
M1271000300524
LUBRICANTS
M1271000400264
SEALANT AND ADHESIVE
M1271000500119
ITEM
STANDARD VALUE
LIMIT
Rear axle total backlash mm (in)
−
5 (0.2)
Axle shaft end play mm (in)
0
− 0.25 (0 − 0.010)
−
Protruding length of stabilizer bar mounting bolt mm (in)
15
− 17 (0.6 − 0.7)
−
Press-fitting force of retainer N (lb)
Initial press-force
49,000 (11,016) or more
−
Final press-fitting
force
98,000
− 108,000
(22,032
− 24,281)
−
Clearance of snap ring and retainer mm (in)
0
− 0.166 (0 − 0.0065)
−
Distance between bearing case and ABS rotor mm (in)
19.4
− 20.0 (0.76 − 0.79) −
Final drive gear backlash mm (in)
0.13
− 0.18
(0.005
− 0.007)
−
Drive gear runout mm (in)
−
0.05 (0.002)
Differential gear backlash mm (in)
0
− 0.076 (0 − 0.0030)
0.2 (0.01)
Drive pinion rotation
torque
N
⋅m (in-lb)
Without oil seal
With anti-rust agent
(new)
0.6
− 0.9 (5.3 − 8.0)
−
With gear oil applied
(new or used)
0.4
− 0.5 (3.5 − 4.4)
−
With oil seal
With anti-rust agent
(new)
0.85
− 1.15 (7.52 − 10.18) −
With gear oil applied
(new or used)
0.65
− 0.75 (5.75 − 6.64) −
ITEM
SPECIFIED LUBRICANT
QUANTITY
Rear differential gear oil <Conventional differential>
Hypoid gear oil API classification GL-5 or
higher
• Above −23°C(−10°F): SAE 90, 85W-90,
80W-90
• From −34 to −23°C(−30 to −10°F): SAE
80W, 80W-90
• Below −34°C(−30°F): SAE 75W
<Limited slip differential>
Hypoid gear oil MITSUBISHI Genuine Gear
Oil Part No.8149630 EX or equivalent
3.2 dm
3
(3.4 qt)
ITEM
SPECIFIED SEALANT AND ADHESIVE
Bearing case
3M
AAD Part No. 8672, 8679, 8678, 8661, 8663 or
equivalent
Dust cover
Axle housing (differential carrier mounting part)
Drive gear and differential case mounting part
3M
AAD Part No. 8730, 8731 or equivalent