|
|
TRANSMISSION TSB Revision AUTOMATIC TRANSMISSION OVERHAUL 23B-47 CAUTION Make sure thrust bearing number 2 is mounted in the cor- 34.Install the reverse and overdrive clutch. number 2, and then install on the reverse and overdrive 36.Apply Vaseline or petroleum jelly on the thrust race number 1 being used, and then install on the oil pump. CAUTION Never reuse a gasket. illustration, and using this as a guide, install the oil pump 38.Tighten the ten oil pump mounting bolts to the specified torque. Specified torque: 23 ± 3 N⋅m (17 ± 2 ft-lb) AKX00103 THRUST BEARING NO.2 AB AKX00104 REVERSE AND OVERDRIVE CLUTCH THRUST BEARING NO.2 AB AKX00105 THRUST AB AKX00106 MD998412 AB |