|
|
SYMPTOM PROCEDURES TSB Revision SIMPLIFIED WIRING SYSTEM (SWS) 54B-325 STEP 15. Check front-ECU connector A-07X for loose, YES : Go to Step 16. to GROUP 00E, Harness Connector Inspection . Verify that the position light (LH) illuminates normally. STEP 16. Check the wiring harness between position light connector A-18 (terminal 2) and front-ECU connector connector(s) may have loose, corroded or damaged STEP 17. Check the position light bulb (RH). burned out. Q: Is the position light bulb (RH) in good condition? YES : Go to Step 18. position light (RH) illuminates normally. AC204183 CONNECTOR : A-07X AB 2 1 3 4 6 7 8 9 5 11 10 RELAY BOX SIDE AC204183 CONNECTOR : A-07X AB 2 1 3 4 6 7 8 9 5 11 10 RELAY BOX SIDE AC204167 CONNECTOR : A-18 HARNESS A-18(GR) A-18(GR) AG 2 1 |