Mitsubishi Montero (1991+). Manual - part 198

 

  Index      Mitsubishi     Mitsubishi Montero - service repair manual 1991 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  196  197  198  199   ..

 

 

Mitsubishi Montero (1991+). Manual - part 198

 

 

                                  of part with damaged threads if

                                    available; otherwise, replace

                                                         bushing.

Attaching hardware

 threads stripped

 (threads missing)  ......  A  .....  Require replacement of part

                                         with stripped threads if

                                    available; otherwise, replace

                                                         bushing.

Binding  .................  A  ..  Require repair or replacement.

Deteriorated, affecting

 performance  ............  A  ..  Require repair or replacement.

Distorted, affecting

 performance  ............  A  ..  Require repair or replacement.

Leaking (fluid-filled

 type)  ..................  A  ............  Require replacement.

Missing  .................  C  ............  Require replacement.

Noisy  ...................  2  ..........  ( 1) Further inspection

                                                        required.

Rubber separating from

 internal metal sleeve on

 bonded bushing  .........  A  ............  Require replacement.

Seized  ..................  A  ............  Require replacement.

Shifted (out of

 position)  ..............  B  ..  Require repair or replacement.

Split  ...................  A  ............  Require replacement.

Surface cracking (weather-

 checked)  ...............  ..  ........  No service suggested or

                                                       required.

(1) - If noise isolated to bushing, suggest repair or

      replacement.

CAUTION:  Use only approved lubricant on rubber bushings.

      Petroleum-based lubricants may damage rubber bushings.



         CENTER LINKS

CENTER LINK INSPECTION



Condition                 Code                          Procedure

Attaching hardware

 incorrect  ..............  A  ..........  Require replacement of

                                    incorrect part, if available;

                                  otherwise, replace center link.

Attaching hardware

 loose  ..................  A  ...  Require repair or replacement

                                     of loose part, if available;

                                  otherwise, replace center link.

Attaching hardware

 missing  ................  C  ..  Require replacement of missing

                                   part, if available; otherwise,

                                             replace center link.

Attaching hardware

 threads damaged  ........  A  ...  Require repair or replacement

                                    of part with damaged threads,

                                         if available; otherwise,

                                             replace center link.

Attaching hardware

 threads stripped

 (threads missing)  ......  A  .....  Require replacement of part

                                        with stripped threads, if

                                    available; otherwise, replace

                                                     center link.

Bent  ....................  B  ............  Require replacement.

Binding  .................  A  ........... ( 1) Further inspection

                                                        required.

Grease boot cracked  .....  2  ........  (2) Suggest replacement.

Grease boot missing  .....  2  ........  (3) Suggest replacement.

Grease boot torn  ........  2  ........  (4) Suggest replacement.

Grease fitting broken  ...  A  ...  Require replacement of grease

                                                         fitting.

Grease fitting missing  ..  C  ...  Require replacement of grease

                                                         fitting.

Grease fitting

 won’t seal  .............  A  ...  Require replacement of grease

                                                         fitting.

Grease seal missing  .....  2  ........  (3) Suggest replacement.

Grease seal torn  ........  2  ........  (4) Suggest replacement.

Looseness (perceptible

 horizontal movement)  ...  1  ........  (5) Suggest replacement.

Looseness that is

 excessive  ..............  B  .....  (5)(6) Require replacement.

Seized  ..................  A  ............  Require replacement.

Stud bent  ...............  B  ........  (7) Require replacement.

Stud broken  .............  A  ........  (7) Require replacement.

Stud loose in

 taper hole  .............  A  ...........  ( 7) Require repair or

                                                     replacement.

Taper hole elongated  ....  A  ........  (8) Require replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped

 (threads missing)  ......  A  ........  (7) Require replacement.

Wear exceeds

 manufacturer’s

 specifications  .........  B  ............  Require replacement.

(1) - If greaseable, grease joint. If problem persists or

      joint is non-greaseable, require replacement.

(2) - Cracked grease boot will allow contaminants to enter

      the joint and will accelerate wear.

(3) - Lack of grease boot will allow contaminants to enter

      the joint and will accelerate wear.

(4) - Torn grease boot will allow contaminants to enter the

      joint and will accelerate wear.

(5) - If manufacturer’s procedures for inspection exist, use

      those procedures; otherwise, use an approved inspection

      method such as the dry park check.

CAUTION:  DO NOT use pliers or pry bar to check ball and socket

         movement. Use only moderate hand pressure.

(6) - Excessive looseness is defined as being significant

      enough to affect vehicle handling or structural

      integrity.

(7) - Check for damaged taper hole.

(8) - Check for damaged stud.



         CONTROL ARM SHAFTS

CONTROL ARM SHAFT INSPECTION



Condition                 Code                          Procedure

Attaching hardware

 broken  .................  A  ...  Require replacement of broken

                                   part, if available; otherwise,

                                                   replace shaft.

Attaching hardware

 loose  ..................  A  ...  Require repair or replacement

                                     of loose part, if available;

                                        otherwise, replace shaft.

Attaching hardware

 missing  ................  C  ..  Require replacement of missing

                                   part, if available; otherwise,

                                                   replace shaft.

Attaching hardware

 threads damaged  ........  A  ...  Require repair or replacement

                                    of part with damaged threads,

                                         if available; otherwise,

                                                   replace shaft.

Attaching hardware

 threads stripped

 (threads missing)  ......  A  .....  Require replacement of part

                                        with stripped threads, if

                                    available; otherwise, replace

                                                           shaft.

Bent  ....................  B  ............  Require replacement.

Shaft bushing surface

 undersized (worn)  ......  B  ............  Require replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped (threads

 missing)  ...............  A  ............  Require replacement.



         CONTROL ARMS

CONTROL ARM INSPECTION



Condition                 Code                          Procedure

Attaching hardware

 bent  ...................  B  ...  Require repair or replacement

                                      of bent part, if available;

                                  otherwise, replace control arm.

Attaching hardware

 broken  .................  A  ...  Require replacement of broken

                                   part, if available; otherwise,

                                             replace control arm.

Attaching hardware

 corroded, affecting

 structural integrity  ...  A  .  Require replacement of corroded

                                   part, if available; otherwise,

                                             replace control arm.

Attaching hardware

 incorrect  ..............  A  ..........  Require replacement of

                                    incorrect part, if available;

                                  otherwise, replace control arm.

Attaching hardware

 loose  ..................  A  ...  Require repair or replacement

                                     of loose part, if available;

                                  otherwise, replace control arm.

Attaching hardware

 missing  ................  C  ..  Require replacement of missing

                                   part, if available; otherwise,

                                             replace control arm.

Attaching hardware

 threads damaged  ........  A  ...  Require repair or replacement

                                    of part with damaged threads,

                                         if available; otherwise,

                                             replace control arm.

Attaching hardware

 threads stripped

 (threads missing)  ......  A  .....  Require replacement of part

                                        with stripped threads, if

                                    available; otherwise, replace

                                                     control arm.

Bent  ....................  B  ............  Require replacement.

Bushing hole oversized  ..  B  ............  Require replacement.

Ball joint hole oversized

 (loose interference or

 press fit)  .............  B  ..........  ( 1) Further inspection

                                                        required.

Corroded, affecting

 structural integrity  ...  A  ............  Require replacement.

Holes distorted  .........  A  ............  Require replacement.

Threads damaged  .........  A  ..  Require repair or replacement.

Threads stripped (threads

 missing)  ...............  A  ............  Require replacement.

(1) - If oversized ball joint is available, require

      replacement of ball joint. If oversized ball joint

      is not available, require replacement of control arm.



         DRAG LINKS

DRAG LINK INSPECTION



Condition                 Code                          Procedure

Attaching hardware

 incorrect  ..............  A  ..........  Require replacement of

                                    incorrect part, if available;

                                    otherwise, replace drag link.

Attaching hardware

 loose  ..................  A  ...  Require repair or replacement

                                     of loose part, if available;

                                    otherwise, replace drag link.

Attaching hardware

 missing  ................  C  ..  Require replacement of missing

                                   part, if available; otherwise,

                                               replace drag link.

Attaching hardware

 threads damaged  ........  A  ...  Require repair or replacement

                                    of part with damaged threads,

                                         if available; otherwise,

                                               replace drag link.

Attaching hardware

 threads stripped

 (threads missing)  ......  A  .....  Require replacement of part

                                        with stripped threads, if

                                    available; otherwise, replace

                                                       drag link.

Bent  ....................  B  ............  Require replacement.

Binding  .................  A  ..........  ( 1) Further inspection

                                                        required.

Grease boot cracked  .....  2  ........  (2) Suggest replacement.

Grease boot missing  .....  2  ........  (3) Suggest replacement.

Grease boot torn  ........  2  ........  (4) Suggest replacement.

Grease fitting broken  ...  A  ...  Require replacement of grease

                                                         fitting.

 

 

 

 

 

 

 

Content   ..  196  197  198  199   ..