|
|
FRONT CASE AND OIL PUMP TSB Revision ENGINE OVERHAUL <2.4L> 11B-45 >>L<< DRAIN PLUG GASKET INSTALLATION CAUTION If the gasket is installed in the wrong direction, oil leaks >>M<< OIL FILTER INSTALLATION 2. Apply engine oil to the O-ring of the oil filter. 3. Install the oil filter to the bracket and tighten it to the specified torque. Tightening torque: Part number MD360935 filter: ⋅⋅⋅⋅ m (122 in-lb) Other Mitsubishi Genuine filter: ⋅⋅⋅⋅ m (12 ft-lb) 4. If no torque wrench can be used for tightening, use the following procedure: (1) Screw in the oil filter until its O-ring contacts the oil filter bracket. (2) Tighten the oil filter by giving the specified amount of turn: Part number MD360935 filter: one turn AKX00596 DRAIN PLUG OIL PAN OIL PAN GASKET AB AKX00529 BRACKET SIDE AB |