|
|
ENGINE <4G9-MPI> – Engine Assembly 11B-35 A B " A/C COMPRESSOR REMOVAL Disconnect the A/C compressor connector and remove the NOTE A C " ENGINE ASSEMBLY REMOVAL 1. Check that all cables, hoses and harness connectors, 2. Lift the chain block slowly to remove the engine assembly INSTALLATION SERVICE POINTS " A A ENGINE ASSEMBLY INSTALLATION Install the engine assembly, checking that the cables, hoses, " B A O-RING/FUEL HIGH-PRESSURE HOSE 1. Apply a small amount of new engine oil to the O-ring. Caution 2. While turning the fuel high-pressure hose to the right and 3. If the hose does not turn smoothly, the O-ring is probably 4. Tighten the fuel high-pressure hose mounting bolt to the Tightening torque: 5.0 ± 1.0 N·m |