|
|
DIAGNOSIS <TC-SST> TSB Revision TWIN CLUTCH- SPORTRONIC SHIFT TRANSMISSION (TC-SST) 22C-141 DTC P1833: Shift Fork Position Sensor 4 System (Output range out) CAUTION • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be • Whenever the ECU is replaced, ensure that the CAN bus lines are normal. . DIAGNOSTIC FUNCTION TC-SST-ECU checks that the output of the shift fork . DESCRIPTIONS OF MONITOR METHODS The output of the shift fork position sensor 4 is deter- . MONITOR EXECUTION • Continuous . MONITOR EXECUTION CONDITIONS Other Monitor (There is no temporary DTC stored in memory for the item monitored below) • P1831: Shift fork position sensor 4 system (Volt- age low range out) • P1832: Shift fork position sensor 4 system (Volt- age high range out) • P1834: Shift fork position sensor 4 system (Neu- tral) • P1835: Shift fork position sensor 4 system (Poor performance) • P184B: Shift fork 4 malfunction • P1852: Shift fork 1 or 2 opposite direction move- ment • P1855: Shift fork 3 or 4 opposite direction move- ment • P1858: Even number gear axle interlock • P1876: Gear block 1st • P1877: Gear block 2nd • P1878: Gear block 3rd • P1879: Gear block 4th • P187A: Gear block 5th • P187B: Gear block 6th • P187C: Gear block reverse Sensor (The sensor below is determined to be normal) • Not applicable . |