Mitsubishi Lancer Evolution X. Manual - part 119

 

  Index      Mitsubishi     Mitsubishi Lancer Evolution X GS41EVO - service repair manual 2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  117  118  119  120   ..

 

 

Mitsubishi Lancer Evolution X. Manual - part 119

 

 

CRUISE CONTROL

TSB Revision

ENGINE AND EMISSION CONTROL

17-63

SPECIAL TOOLS

M1172000601513

Tool

Tool number and name Supersession

Application

MB991958

a: MB991824
b: MB991827
c: MB991910
d: MB991911
e: MB991914
f: MB991825
g: MB991826

Scan tool (M.U.T.-III sub 
assembly)

a: Vehicle 

communication 
interface (V. C. I.) 

b: M.U.T.-III USB cable
c: M.U.T.-III main 

harness A (Vehicles 
with CAN 
communication 
system)

d: M.U.T.-III main 

harness B (Vehicles 
without CAN 
communication 
system)

e: M.U.T.-III main 

harness C (for 
Chrysler models only)

f: M.U.T.-III 

measurement adapter

g: M.U.T.-III trigger 

harness

MB991824-KIT
NOTE: g: MB991826 
M.U.T.-III Trigger 
Harness is not 
necessary when 
pushing V.C.I. ENTER 
key.

CAUTION

For vehicles with CAN 
communication, use 
M.U.T.-III main harness A 
to send simulated vehicle 
speed. If you connect 
M.U.T.-III main harness B 
instead, the CAN 
communication does not 
function correctly.

• Checking DTC.
• Checking data list.

MB991910

MB991826

MB991958

MB991911

MB991914

MB991824

MB991827

MB991825

Do not use

a

b

c

d

e

f

g

Do not use

CRUISE CONTROL

TSB Revision

ENGINE AND EMISSION CONTROL

17-64

MB991223

a: MB991219
b: MB991220
c: MB991221
d: MB991222

Harness set

a: Test harness
b: LED harness
c: LED harness adaptor
d: Probe

General service tools

Checking the continuity and 
measuring the voltage at the 
harness connector

MB992006
Extra fine probe

General service tool

Continuity check and voltage 
measurement at harness 
wire or connector for loose, 
corroded or damaged 
terminals, or terminals 
pushed back in the 
connector.

MB992110
Power plant ECU check 
harness

Measuring the terminal 
voltage at the ECM

Tool

Tool number and name Supersession

Application

MB991223

a

d

c

b

DO NOT USE

BF

MB992006

MB992110

CRUISE CONTROL

TSB Revision

ENGINE AND EMISSION CONTROL

17-65

ON-VEHICLE SERVICE

CRUISE CONTROL SWITCH CHECK

M1172001201165

CRUISE CONTROL "ON/OFF" SWITCH CHECK

1. Turn the ignition switch to the "ON" position.
2. Check that the "CRUISE" indicator light within the 

combination meter illuminates when the "ON/OFF" switch is 
pressed (cruise control system: ON.)

3. Press the "ON/OFF" switch again (cruise control system: 

OFF), and check that the "CRUISE" indicator light within the 
combination meter goes out.

 CRUISE CONTROL SETTING

1. Start the engine.
2. Press the "ON/OFF" switch (cruise control system: ON, 

"CRUISE" indicator light: illuminated.)

3. Drive at the desired speed, above approximately 40 km/h 

(25 mph.)

4. Press the "COAST/SET" switch.
5. Check to be sure that when the "COAST/SET" switch is 

released the speed is the constant speed.
NOTE: If the vehicle speed decreases to approximately 15 
km/h (9 mph) below the set speed because of climbing a hill 
for example, it is normal for the cruise control to be can-
celled. When the vehicle speed becomes low-speed limit 
[approximately 40 km/h (25 mph)] or less, driving at constant 
speed will be cancelled even if the vehicle speed does not 
decrease 15 km/h (9 mph) or more.

SPEED-INCREASE SETTING

1. Start the engine.
2. Press the "ON/OFF" switch (cruise control system: ON, 

"CRUISE" indicator light: illuminated.)

CANCEL

ACC

RES

ON

OFF

COAST

SET

AC708694 AC

Cruise control switch

"ON/OFF" switch: 
"ON"

AC902078 AB

"CRUISE" indicator light

CANCEL

ACC

RES

ON

OFF

COAST

SET

AC708694 AD

Cruise control switch

"COAST/SET"
switch

CRUISE CONTROL

TSB Revision

ENGINE AND EMISSION CONTROL

17-66

3. Set to the desired speed, above approximately 40 km/h (25 

mph.)

4. Press the "ACC/RES" switch.
5. Check to be sure that acceleration continues while the 

"ACC/RES" switch is pushed, and that the speed at the time 
it was released becomes the constant driving speed.
NOTE: Acceleration can be continued even if the vehicle 
speed has passed the high-speed limit [approximately 200 
km/h (125 mph)]. But the constant driving speed when the 
"ACC/RES" switch is released will be recorded as the 
high-speed limit.

SPEED-REDUCTION SETTING

1. Start the engine.
2. Press the "ON/OFF" switch (cruise control system: ON, 

"CRUISE" indicator light: illuminated.)

3. Set to the desired speed, above approximately 40 km/h (25 

mph.)

4. Press the "COAST/SET" switch.
5. Check to be sure that deceleration continues while the 

"COAST/SET" switch is pressed, and that the speed at the 
time it was released becomes the constant driving speed.
NOTE: When the vehicle speed reaches the low limit 
[approximately 40 km/h (25 mph)] during deceleration, the 
cruise control will be cancelled.

RETURN TO THE SET SPEED BEFORE 
CANCELLATION AND CRUISE CONTROL 
CANCELLATION

1. Start the engine.
2. Press the "ON/OFF" switch (cruise control system: ON, 

"CRUISE" indicator light: illuminated.)

3. Set to the desired speed, above approximately 40 km/h (25 

mph.)

4. When any of the following operations are performed while at 

constant speed during cruise control, check if normal driving 
is resumed and deceleration occurs.

(1) The "CANCEL" switch is pressed.
(2) The brake pedal is depressed.

5. At a vehicle speed of approximately 40 km/h (25 mph) or 

higher, check if when the "ACC/RES" switch is pressed, the 
vehicle speed returns to the speed before cruise control 
driving was cancelled, and constant speed driving occurs.

6. When the "ON/OFF" switch is pressed again (cruise control 

system: OFF) while driving at constant speed, check if 
normal driving is resumed and deceleration occurs.

CANCEL

ACC

RES

ON

OFF

COAST

SET

AC708694 AE

Cruise control switch

"ACC/RES"
switch

CANCEL

ACC

RES

ON

OFF

COAST

SET

AC708694 AF

Cruise control switch

"CANCEL" switch

 

 

 

 

 

 

 

Content   ..  117  118  119  120   ..