Mitsubishi Lancer Evolution 8. Manual - part 17
EQUIPMENT - SMART WIRING SYSTEM (SWS)
7-18
• Turn signal light operation sound function
This function gives a buzzer sound signal in synchronization with a hazard light and turn signal light.
• Keyless entry hazard feedback function
This function can confirm whether a vehicle is locked or unlocked even when away from the vehicle by making a hazard light
flash when locking or unlocking with the keyless entry transmitter.
• Multi mode keyless entry system electric window and sunroof function
This function activates the electric window and sunroof by operating the keyless entry transmitter even when away from the
vehicle.
• Time lock time after keyless entry unlock
When a door does not open after unlocking by operating the keyless entry transmitter, this function locks the door
automatically after a fixed time.
• Electric window and sunroof timer function time
This function enables operation of the electric window and sunroof timer for a fixed time even after the ignition switch has
been turned to the OFF (LOCK) position.
• Electric window lock driver’s seat operation
After pressing the electric window lock switch, which is inside the main electric window switch, this function enables operation
of the electric windows other than the driver’s seat electric window by electric window switch.
• Vehicle speed response wiper function
When the windscreen wiper switch is in the intermittent position, this function changes the intermittent time according to the
vehicle speed with the intermittent adjusting knob
• Rear wiper intermittent time
The rear wiper switch functions intermittently when the rear wiper switch is turned ON. Also, this function makes the rear
wiper operate continuously according to the continuous operation of the rear wiper switch.
• Electric retractable door mirror automatic return function
This function opens the door mirror automatically when driving with the door mirror retracted. It can also carry out retraction
and return of the door mirror by other means.
• Headlight auto-cut function
This function turns the ignition switch into the OFF (LOCK) position when the lighting switch is in the TAIL, AUTO or HEAD
position, and turns off the headlight automatically in order to avoid leaving the headlight on when opening the driver’s door.
• Interior light delayed switch-off time
When the doors are closed and the ignition switch is in the OFF (LOCK) position, this function automatically switches off the
interior lights after a fixed time.
• Interior light auto-cut function
When the ignition switch is in the OFF (LOCK) position, this function makes interior lights such as interior lights flash for a
minimum fixed time, and automatically turns them off.
• It is possible to switch between security alarm function valid / invalid.
• Performance adjustment during electric window key-off timer
This function enables operation of electric windows other than the driver’s seat electric window while the electric window
timer is functioning.
ITEM
NO.
ITEM MUT
DISPLAY
ITEM
ADJUSTMENT CONTENT
MUT DISPLAY
ADJUSTMENT CONTENT
2
HD AUTO-CUT
Headlight auto-cut
adjustment
FUNCTION ON
(A display)
Function ON: Goes ON automatically when the
ignition switch is in the LOCK (OFF)
FUNCTION ON
(D display)
position and the tail light has been turned on
Function ON: Goes OFF automatically when the
ignition switch is in the LOCK (OFF) position and
the tail light has been turned on (initial setting)
FUNCTION OFF
Function OFF
4
VEHICLE SPEED
RESPONSE
WIPER
Vehicle speed
response wiper
function
FUNCTION ON
Function ON (initial setting)