Mitsubishi Lancer Evolution 8 MR. Manual - part 24

 

  Index      Mitsubishi     Mitsubishi Lancer Evolution 8 MR - service repair manual 2004 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  22  23  24  25   ..

 

 

Mitsubishi Lancer Evolution 8 MR. Manual - part 24

 

 

GENERAL INFORMATION - VEHICLE IDENTIFICATION

0-2

Model
code

Class
code

2004
code

Grade

Engine model

Transmission
model

Fuel
supply
system

GH-CT9A

SNDFZ

!

RS

W5M51
(4WD, 5M/T)

SJDFZ

!

RS

SJGFZ

!

GSR

4G63 (2000
DOHC 16-valve
intercooler turbo)

W6MAA
(4WD, 6M/T)

MPI

Connector
Code

Name

Page

Details of Change

B

Engine transmission

p.1-2

•

 Due to changes in the engine control system, the

name of the wastegate solenoid valve (B-30) has
been changed to “wastegate solenoid valve 1”, and
an additional wastegate solenoid valve 2 (B-32) has
been added.

• 

The 4WD-ECU (C-37, 38) has been moved from

the instrument panel harness to the control harness.

• 

With the removal of the DVD-MMCS, the following

connectors have been removed.
  

•

 Multi-centre display (C-11, 12)

  

•

 Navigation unit (C-47)

The immobiliser ECU (C-54) has also been removed,
due to changes in the engine immobiliser system.

C

Instrument panel

p.1-4

• 

With the removal of the DVD-MMCS, the following

connectors have been removed.
  

•

 Audio unit (C-102)

  

•

 Hazard switch (C-105)

F

Boot interior

p.1-6

• 

Spare connector (F-28) added.

Changed part

Page

Details of change

ECU

p.2-2

• 

With changes in the engine immobiliser system, the

installation position of the immobiliser ECU has been
changed.

Solenoid valve

p.2-2

• 

With the addition of the wastegate solenoid valve 2, a

new installation point has been provided.

VEHICLE IDENTIFICATION

M3000000100845

Note: 





denotes a continued model

IMPLEMENTATION CODE

M3000001000584

GH-CT9A ; CT9A-0300001 ~

DETAILS OF CHANGES

Wiring diagrams

M3000003000159

Component installation positions

M3000004000141

GENERAL INFORMATION - DETAILS OF CHANGES

0-3

Main circuit

Name of circuit

Page

Details of change

J/C

-

p.3-2

•

 

Partial changes to circuit and
destination system names in J/C(1) —
(6)

-

•

 

With the introduction of manual air
conditioning, the circuit used by the
fusible link No.2 has been changed.

•

 

Wastegate solenoid valve 2 added to
load of special fuse No.3.

•

 

Rating of special fuse No.10 changed
from 15A to 20A.

Power supply

-

p.3-10

•

 

Partial changes to destination system
names.

•

 

Earth No.13 added.

•

 

Rating of special fuse No.10 changed
from 15A to 20A.

•

 

Partial changes to circuit details, due
to removal of sunroof.

Engine control

-

p.3-16

•

 

Rating of special fuse No.10 changed
from 15A to 20A.

•

 

Earth No.13 added.

•

 

Some changes to circuit, due to
addition of wastegate solenoid valve
2 (B-32).

•

 

Partial changes, due to removal of
DVD-MMCS

Lighting

Interior lights, boot interior
light, ignition key cylinder
illumination light, door not
closed indicator light

-

•

 

Change to terminal number in J/C(2)
(C-119) on line linking ETACS and
diagnosis connector. (No.1 

" No.5)

Reversing lights

-

•

 

Change to terminal number in J/C(2)
(C-119) on line linking reversing light
and rear combination light (LH).
(No.18 

" No.19)

Signal

Stop lights

p.3-24

•

 

Spare connector (F-28) added, and
circuit partially changed.

Meters / Gauges

-

Meters

Remaining fuel warning
light, oil pressure warning
light, brake warning light,
seatbelt warning light

-

•

 

Change to terminal number in J/C(1)
(C-07) on line inking J/B (general fuse
No.18) and combination meter. (No.4
" No.8)

•

 

Change to terminal number in J/C(4)
(C-110) on line linking combination
meter and fuel gauge unit (sub).
(No.20 

" No.21)

Door opening
control

Electric windows

-

•

 

Change to terminal number in J/C(2)
(C-119) on line linking power window
main switch and diagnosis connector.
(No.12 

" No.14)

Fully automatic air
conditioning

-

•

 

Change to terminal number in J/C(1)
(C-07) on line linking J/B (general
fuse No. 18) and A/C-ECU. (No.6 

"

No.4)

•

 

Change to terminal number in J/C(5)
(C-06) on line linking A/C-ECU and
diagnosis connector. (No.8 

" No.9)

Air
conditioning

Manual air conditioning

p.3-26

•

 

With the adoption of manual air
conditioning, a new circuit has been
installed.

Windscreen wipers and
washers

-

Safety and
visibility

Electric retractable remote
control door mirrors

-

•

 

Change to terminal number in J/C(2)
(C-119) on line linking ETACS and
diagnosis connector. (No.1 

" No.5)

Circuit diagrams

M3000004500157

GENERAL INFORMATION - DETAILS OF CHANGES

0-4

Main circuit

Name of circuit

Page

Details of change

Spare Audio connectors

-

•

 

Change to terminal number in J/C(1)
(C-07) on line inking J/B (general fuse
No.18) and spare audio connector.
(No.3 

" No.7)

Accessories

Clock

-

•

 

Change to terminal number in J/C(1)
(C-07) on line inking J/B (general fuse
No.18) and clock. (No.2 

" No.6)

Special
Equipment

ABS

p.3-32

ACD (Vehicles not fitted with
AYC)

p.3-40

•

 

Circuit changed due to change in
branching point of connector for
4WD-ECU (C-37) (C-38) (from
instrument panel harness to control
harness).

•

 

J/C(6) (C-23) added between ABS-
ECU and 7

th

 terminal of junction

connector (C-20) between instrument
panel harness and control harness.

•

 

J/C(6) (C-23) added between ABS-
ECU and 22

nd

 terminal of junction

connector (C-22) between instrument
panel harness and control harness.

ACD, AYC

p.3-48

•

 

Circuit changed due to change in
branching point of connector for
4WD-ECU (C-37) (C-38) (from
instrument panel harness to control
harness).

•

 

Earth No.13 added

•

 

J/C(6) (C-23) added between 4WD-
ECU and 7

th

 terminal of junction

connector (C-20) between instrument
panel harness and control harness.

•

 

J/C(6) (C-23) added between 4WD-
ECU and 22

nd

 terminal of junction

connector (C-22) between instrument
panel harness and control harness.

Intercooler water spray

-

•

 

Change to terminal number in J/C(1)
(C-07). (No.12 

" No.21).

Engine immobiliser system

p.3-58

•

 

Partial changes due to removal of
DVD-MMCS.

•

 

Partial changes to circuit, due to
change in installation point of
immobiliser ECU.

Spare general connectors

-

•

 

Change to terminal numbers in J/C(1)
(C-07) on line linking J/B (general
fuse No.18) / special fuse No.15, and
general spare connectors. (No.7 

"

No.5), (No.21 

" No.12).

GENERAL INFORMATION - LIST OF CIRCUIT DIAGRAMS

0-5

Main circuit

Name of Circuit

Circuit Diagram

J/B

-

!

J/C

-

#

Central junction

-

#

Power supply

-

#

Start up

-

!

Ignition

-

!

Charging

-

!

Engine control

-

#

Coolant

-

!

Headlights (excluding  discharge type )

!

Headlight ( discharge  type)

!

Tail lights, side lights, licence plate lights, lighting monitor
warning buzzer

!

Cabin lights, boot interior light, ignition key cylinder
illumination light, door not closed indicator light *2

!

Fog lights

!

Lighting

Headlight levelling system

!

Indicator lights, hazard warning lights

!

Reversing lights *2

!

Stop lights

#

Signalling

Horn

!

Meters / Gauges *2

!

Meters

Remaining fuel warning light, oil pressure warning light,
brake warning light, seatbelt warning light *2

!

Electric windows *2

!

Central door locking (vehicle not fitted with keyless entry)

!

Door opening control

Central door locking (vehicle fitted with keyless entry)

!

Heater

!

Fully automatic air conditioning

!

Air conditioning

Manual air conditioning

#

List of Circuit Diagrams

M3000006000169

Notes:
1. This list of circuit diagrams indicates whether each circuit has been modified or added.
2. The “

●

” symbol indicates a circuit that has been modified or added. Diagrams for these circuits are included in

this supplement.
3. The “





” symbol indicates a circuit that is unchanged. Details of these circuits can be found in the existing

Electrical Wiring Diagram manual (’03-1 No.1036K77).
4. The “X” symbol indicates a circuit that is unrelated to the vehicle referred to in this manual.
5. The “*1” symbol marks circuits whose names have been changed the previous names.
6. The “*2” symbol marks circuits whose J/C terminal numbers have changed. For more information, please refer
to the “Details of Changes” table above.

 

 

 

 

 

 

 

Content   ..  22  23  24  25   ..