Mitsubishi Eclipse. Manual - part 657
SPECIFICATIONS
TSB Revision
COOLING SYSTEM
14-31
>>C<< O-RING INSTALLATION
CAUTION
Do not allow engine oil or other grease to adhere to the
O-ring.
Install the O-ring to the water pipe, and coat the outer portion of
the O-ring with water or engine coolant.
INSPECTION
M1141003400166
Water Pipe and Hose Check
Check the water pipe and hose for cracks, damage and clogs.
Replace them if necessary.
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
M1141005000164
ACX00402
O-RING
WATER PIPE
AD
ITEM
SPECIFICATION
Radiator
A/T oil cooler hose connection bolt <A/T>
4.9
± 1.0 N⋅m (44 ± 8 in-lb)
Radiator support bolt
12
± 2 N⋅m (100 ± 22 in-lb)
Reserve tank bolt
12
± 2 N⋅m (100 ± 22 in-lb)
Thermostat
Water inlet fitting bolt <2.4L ENGINE>
13
± 2 N⋅m (109 ± 21 in-lb)
Water inlet fitting bolt <3.0L ENGINE>
19
± 1 N⋅m (13 ± 1 ft-lb)
Water pump <2.4L ENGINE>
Generator bolt
23
± 2 N⋅m (16 ± 2 ft-lb)
Generator brace bolt
23
± 3 N⋅m (17 ± 3 ft-lb)
Water pump bolt
14
± 1 N⋅m (117 ± 13 in-lb)
Water pump <3.0L ENGINE>
Water pump bolt
23
± 3 N⋅m (17 ± 3 ft-lb)
Water pump bracket bolt
23
± 3 N⋅m (17 ± 3 ft-lb)
Water pump gasket bolt
41
± 8 N⋅m (30 ± 6 ft-lb)
Water hose and water pipe <2.4L ENGINE>
Thermostat case bolt
23
± 4 N⋅m (17 ± 3 ft-lb)
Water inlet fitting bolt
13
± 2 N⋅m (109 ± 21 in-lb)
Water inlet pipe assembly bolt
13
± 2 N⋅m (109 ± 21 in-lb)