|
|
136 3-2. Opening, closing and locking the doors and trunk IS350 AWD/IS350/IS300 AWD/IS300_U ■ Alarms and warning messages multi-information display are used to prevent theft of the vehicle and accidents resulting from erroneous operation. Take appropriate measures in response to any warning mes- sage on the multi-information display. ( When only an alarm sounds, circumstances and correction procedures are as follows. ■ If a warning message is displayed indicating that there is a malfunction in the smart access system with push-button start ■ Battery-saving function tery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ● In the following situations, the smart access system with push-button start may take some time to unlock the doors. vehicle for 10 minutes or longer. • The smart access system with push-button start has not been used for 5 days or lon- ger. ● If the smart access system with push-button start has not been used for 14 days or lon- ger, the doors cannot be unlocked at any door except the driver’s door. In this case, hold the driver’s door handle, or use the wireless remote control or mechanical key, to unlock the doors. Alarm Situation Correction procedure Exterior alarm sounds once for 5 seconds An attempt was made to lock the vehicle while a door was open. Close all of the doors and lock the doors again. The trunk was closed while the electronic key was still inside the trunk and all the doors were locked. Retrieve the electronic key from the trunk and close the trunk lid. Interior alarm pings repeatedly The engine switch was turned to ACCESSORY mode while the driver’s door was open (The driver’s door was opened when the engine switch was in ACCESSORY mode). Turn the engine switch off and close the driver’s door. The engine switch was turned off while the driver’s door was open. Close the driver’s door. |