|
|
MANUAL GEARBOX - R380 REPAIRS 37-21 Seal - input shaft $% 37.23.06 Remove 1. Remove gearbox assembly. 2. Remove retaining peg and remove release bearing. 3. Remove bolt securing clutch release fork, remove retaining clip and remove clutch 4. Remove 2 bolts securing release bearing sleeve and remove bearing sleeve. 5. Remove 6 bolts securing bell housing and remove bell housing. 6. Remove and discard 6 bolts securing oil seal housing and remove housing. 7. Using a soft metal drift, carefully remove input shaft front bearing track from housing. 8. Remove oil seal from housing. |