Resin - based Adhesives/Sealers e.g. Epoxide and
Formaldehyde Resin - based
Mixing should be carried out in well ventilated areas, as harmful or toxic volatile chemicals
may be released.
Skin contact with uncured resins and hardeners can result in irritation, dermatitis, and
absorption of toxic or harmful chemicals through the skin. Splashes can damage the eyes.
Provide adequate ventilation and avoid skin and eye contact.
Anaerobic, Cyanoacrylate (Super - glues) and other
Acrylic Adhesives
Many are irritant, sensitizing or harmful to the skin and/or respiratory tract. Some are eye
irritants.
Skin and eye contact should be avoided and the manufacturer's instructions followed.
Cyanoacrylate adhesives (super-glues) MUST NOT contact the skin or eyes. If skin or eye
tissue is bonded, cover with a clean moist pad and seek immediate medical attention. Do not
attempt to pull tissue apart. Use in well ventilated areas as vapors can cause irritation to the
nose and eyes.
For two - pack systems see Resin - based and Isocyanate Adhesives/Sealers.
Isocyanate (Polyurethane) Adhesives/Sealers
See also Resin - based Adhesives
Individuals suffering from asthma or respiratory allergies should not work with or near these
materials as sensitivity reactions can occur.
Over exposure is irritating to the eyes and respiratory system. Excessive concentrations may
produce effects on the nervous system including drowsiness. In extreme cases, loss of
consciousness may result. Long term exposure to vapor concentrations may result in adverse
health effects.
Prolonged contact with the skin may lead to skin irritation and, in some cases, dermatitis.
Splashes entering the eye will cause discomfort and possible damage.
Any spraying should preferably be carried out in exhaust ventilated booths removing vapors
and spray droplets from the breathing zone.
Wear appropriate gloves, eye and respiratory protection.