Infiniti Q60 Coupe (2014 year). Manual

8-36

Maintenance and do-it-yourself

bears white lettering or bears manu-
facturer, brand and/or model name
molding that is higher or deeper than
the same molding on the other side-
wall of the tire, or (2) the outward
facing sidewall of an asymmetrical
tire that has a particular side that
must always face outward when
mounted on a vehicle.

TYPES OF TIRES

WARNING

. When changing or replacing tires, be

sure all four tires are of the same type
(Example: Summer, All Season or Snow)
and construction. An INFINITI retailer
may be able to help you with information
about tire type, size, speed rating and
availability.

. Replacement tires may have a lower

speed rating than the factory equipped
tires, and may not match the potential
maximum vehicle speed. Never exceed
the maximum speed rating of the tire.

. Replacing tires with those not originally

specified by INFINITI could affect the
proper operation of the TPMS.

. For additional information regarding

tires, refer to

“Important Tire Safety

Information

” (US) or “Tire Safety Infor-

mation

” (Canada) in the Warranty Infor-

mation Booklet.

All season tires

INFINITI specifies all season tires on some
models to provide good performance all
year, including snowy and icy road condi-
tions. All Season tires are identified by ALL
SEASON and/or M&S (Mud and Snow) on
the tire sidewall. Snow tires have better
snow traction than All Season tires and
may be more appropriate in some areas.

Summer tires

INFINITI specifies summer tires on some
models to provide superior performance on
dry roads. Summer tire performance is
substantially reduced in snow and ice.
Summer tires do not have the tire traction
rating M&S on the tire sidewall.

If you plan to operate your vehicle in snowy
or icy conditions, INFINITI recommends the
use of SNOW tires or ALL SEASON tires on

all four wheels.

Snow tires

If snow tires are needed, it is necessary to
select tires equivalent in size and load
rating to the original equipment tires. If
you do not, it can adversely affect the
safety and handling of your vehicle.

Generally, snow tires will have lower speed
ratings than factory equipped tires and
may not match the potential maximum
vehicle speed. Never exceed the maximum
speed rating of the tire.

If you install snow tires, they must be the
same size, brand, construction and tread
pattern on all four wheels.

For additional traction on icy roads,
studded tires may be used. However, some
U.S. states and Canadian provinces prohi-
bit their use. Check local, state and
provincial laws before installing studded
tires. Skid and traction capabilities of
studded snow tires, on wet or dry surfaces,
may be poorer than that of non-studded
snow tires.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

TIRE CHAINS

Use of tire chains may be prohibited
according to location. Check the local laws
before installing tire chains. When instal-
ling tire chains, make sure they are the
proper size for the tires on your vehicle and
are installed according to the chain man-
ufacturer

’s suggestions. Use only SAE

Class S chains. Class

“S” chains are used

on vehicles with restricted tire to vehicle
clearance. Vehicles that can use Class

“S”

chains are designed to meet the SAE
standard minimum clearances between
the tire and the closest vehicle suspension
or body component required to accommo-
date the use of a winter traction device (tire
chains or cables). The minimum clearances
are determined using the factory equipped
tire size. Other types may damage your
vehicle. Use chain tensioners when recom-
mended by the tire chain manufacturer to
ensure a tight fit. Loose end links of the
tire chain must be secured or removed to
prevent the possibility of whipping action
damage to the fenders or underbody. If
possible, avoid fully loading your vehicle
when using tire chains. In addition, drive at
a reduced speed. Otherwise, your vehicle
may be damaged and/or vehicle handling

and performance may be adversely af-
fected.

Tire chains must be installed only on the
rear wheels and not on the front wheels.

Never install tire chains on a TEMPORARY
USE ONLY spare tire.

Do not use tire chains on dry roads. Driving
with tire chains in such conditions can
cause damage to the various mechanisms
of the vehicle due to some overstress.

CHANGING WHEELS AND TIRES

Tire rotation
Tires cannot be rotated on this
vehicle because the front tires are a
different size than the rear tires.

A pin is on the front brake rotor to
prevent the rear wheels from being
installed in place of the front wheels.
The spare tire can be installed in
place of the front and rear wheels.
When installing the spare tire in the
front wheel, the hole in the spare tire
wheel must be aligned with the pin
on the brake rotor.

WARNING

. Retighten the wheel nuts when

the vehicle has been driven for
600 miles (1,000 km) (also in
cases of a flat tire, etc.).

. For additional information regard-

ing tires, refer to

“Important Tire

Safety Information

” (US) or “Tire

Safety Information

” (Canada) in

the Warranty Information Booklet.

Maintenance and do-it-yourself

8-37

-------------------------------------------------------------------------------------------------------------------------------------------------------------

8-38

Maintenance and do-it-yourself

SDI1663

Tire wear and damage

Wear indicator

Wear indicator location mark

WARNING

. Tires should be periodically in-

spected for wear, cracking, bul-
ging or objects caught in the
tread. If excessive wear, cracks,
bulging or deep cuts are found,
the tire(s) should be replaced.

. The original tires have built-in

tread wear indicators. When wear
indicators are visible, the tire(s)
should be replaced.

. Tires degrade with age and use.

Have tires, including the spare,
over 6 years old checked by a
qualified technician, because
some tire damage may not be
obvious. Replace the tires as
necessary to prevent tire failure
and possible personal injury.

. Improper service of the spare tire

may result in serious personal
injury. If it is necessary to repair
the spare tire, contact an INFINITI
retailer.

. For additional information regard-

ing tires, refer to

“Important Tire

Safety Information

” (US) or “Tire

Safety Information

” (Canada) in

the Warranty Information Booklet.

Replacing wheels and tires

When replacing a tire, use the same size,
tread design, speed rating and load carry-
ing capacity as originally equipped. (See
“Specifications” (P.9-8) for recommended
types and sizes of tires and wheels.)

WARNING

. The use of tires other than those

recommended or the mixed use of tires
of different brands, construction (bias,
bias-belted or radial), or tread patterns
can adversely affect the ride, braking,
handling, ground clearance, body-to-tire
clearance, tire chain clearance, speed-
ometer calibration, headlight aim and
bumper height. Some of these effects
may lead to accidents and could result in
serious personal injury.

. If your vehicle was originally equipped

with 4 tires that were the same size and
you are only replacing 2 of the 4 tires,
install the new tires on the rear axle.
Placing new tires on the front axle may
cause loss of vehicle control in some
driving conditions and cause an accident
and personal injury.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

. If the wheels are changed for any

reason, always replace with wheels
which have the same off-set dimension.
Wheels of a different off-set could cause
premature tire wear, degrade vehicle
handling characteristics and/or interfer-
ence with the brake discs/drums. Such
interference can lead to decreased brak-
ing efficiency and/or early brake pad/
shoe wear. See

“Wheels and tires” (P.9-

9) of this manual for wheel off-set
dimensions.

. When a spare tire is mounted or a wheel

is replaced, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your INFINITI retailer as soon as
possible for tire replacement and/or
system resetting.

. Replacing tires with those not originally

specified by INFINITI could affect the
proper operation of the TPMS.

. Do not install a damaged or deformed

wheel or tire even if it has been repaired.
Such wheels or tires could have struc-
tural damage and could fail without
warning.

. The use of retread tire is not recom-

mended.

. For additional information regarding

tires, refer to

“Important Tire Safety

Information

” (US) or “Tire Safety Infor-

mation

” (Canada) in the Warranty Infor-

mation Booklet.

Wheel balance

Unbalanced wheels may affect vehicle
handling and tire life. Even with regular
use, wheels can get out of balance. There-
fore, they should be balanced as required.

Wheel balance service should be per-
formed with the wheels off the vehicle.
Spin balancing the wheels on the vehicle
could lead to mechanical damage.

For additional information regarding tires,
refer to

“Important Tire Safety Information”

(US) or

“Tire Safety Information” (Canada)

in the INFINITI Warranty Information Book-
let.

Care of wheels

. Wash the wheels when washing the

vehicle to maintain their appearance.

. Clean the inner side of the wheels when

the wheel is changed or the underside

of the vehicle is washed.

. Do not use abrasive cleaners when

washing the wheels.

. Inspect wheel rims regularly for dents

or corrosion. Such damage may cause
loss of pressure or poor seal at the tire
bead.

. INFINITI recommends that the road

wheels be waxed to protect against
road salt in areas where it is used
during winter.

Spare tire (TEMPORARY USE ONLY
(T-type) spare tire) (if so equipped)

Observe the following precautions if the T-
type spare tire must be used, otherwise
your vehicle could be damaged or involved
in an accident.

WARNING

. The T-type spare tire should be used for

emergency use. It should be replaced
with the standard tire at the first
opportunity to avoid possible tire or
differential damage.

. Drive carefully while the TEMPORARY

USE ONLY spare tire is installed. Avoid

Maintenance and do-it-yourself

8-39

-------------------------------------------------------------------------------------------------------------------------------------------------------------

8-40

Maintenance and do-it-yourself

sharp turns and abrupt braking while
driving.

. Periodically check spare tire inflation

pressure. Always keep the pressure of
the TEMPORARY USE ONLY spare tire at
60 psi (420 kPa, 4.2 bar). Always keep
the pressure of the full size spare tire (if
so equipped) at the recommended pres-
sure for standard tires, as indicated on
the Tire and Loading Information label.
For Tire and Loading Information label
location, see

“Tire and Loading Informa-

tion label

” in the index of this manual.

. With the TEMPORARY USE ONLY spare

tire installed do not drive your vehicle at
speeds faster than 50 MPH (80 km/h).

. When driving on roads covered with

snow or ice, the TEMPORARY USE ONLY
spare tire should be used on the front
wheels and original tire used on the rear
wheels (drive wheels). Use tire chains
only on the two rear original tires.

. Tire tread of the TEMPORARY USE ONLY

spare tire will wear at a faster rate than
the standard tire. Replace the spare tire
as soon as the tread wear indicators
appear.

. Do not use the spare tire on other

vehicles.

. Do not use more than one spare tire at

the same time.

CAUTION

. Do not use tire chains on a TEMPORARY

USE ONLY spare tire. Tire chains will not
fit properly and may cause damage to
the vehicle.

. Because the TEMPORARY USE ONLY

spare tire is smaller than the original
tire, ground clearance is reduced. To
avoid damage to the vehicle, do not
drive over obstacles. Also do not drive
the vehicle through an automatic car
wash since it may get caught.

Emergency tire puncture repair kit
(if so equipped)

The emergency tire puncture repair kit
(Emergency Tire Sealant) is supplied with
the vehicle instead of a spare tire. It can be
used to temporarily repair minor tire
punctures.

If possible, have the vehicle towed to a
facility that can repair or replace the flat
tire. Using the emergency tire puncture
repair kit may cause a malfunction of the
tire pressure sensor and cause the low tire
pressure warning light to illuminate.

See

“Flat tire” (P.6-3) for more details.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

9-2

Technical and consumer information

The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure
instructed in the

“8. Maintenance and do-it-yourself” section to determine the proper refill capacity.

Capacity (Approximate)

Recommended specifications

US measure

Imp measure

Liter

Fuel

20 gal

16-5/8 gal

See

“Fuel information” (P.9-4).

Engine oil

Genuine NISSAN engine oil or equivalent
INFINITI recommends Genuine NISSAN Ester Engine Oil available at an
INFINITI retailer.
For additional information, see

“Engine oil” (P.8-10) for changing engine

oil.
. Engine oil with API Certification Mark

. For additional information, see “Engine oil and oil filter recommenda-

tion

” (P.9-6).

. Viscosity SAE 5W-30

Drain and refill

With oil filter change

5-1/8 qt

4-3/8 qt

4.9

Without oil filter change

4-7/8 qt

4 qt

4.6

Cooling system

Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or
equivalent

Automatic transmission
model

With reservoir

9 qt

7-1/2 qt

8.5

Reservoir

7/8 qt

3/4 qt

0.8

Manual transmission model

With reservoir

9-1/8 qt

7-5/8 qt

8.6

Reservoir

7/8 qt

3/4 qt

0.8

Automatic transmission fluid

—

. Genuine NISSAN Matic S ATF

. Using automatic transmission fluid other than Genuine NISSAN

Matic S ATF will cause deterioration in driveability and automatic
transmission durability, and may damage the automatic transmis-
sion, which is not covered by the INFINITI new vehicle limited
warranty.

Manual transmission gear oil

—

Genuine NISSAN Manual Transmission Fluid (MTF) HQ Multi 75W-85 or
API GL-4, Viscosity SAE 75W-85

Differential gear oil

—

For 7A/T 2WD models:
. API GL-5 Synthetic Gear Oil Viscosity SAE 75W-90

. See an INFINITI retailer for service for synthetic oil.
All other models:
. Genuine NISSAN Differential Oil Hypoid Super GL-5 80W-90 or API GL-

5, Viscosity SAE 80W-90

. For hot climates, viscosity SAE 90 is suitable for ambient

temperatures above 32

8F (08C).

CAPACITIES AND RECOMMENDED FUEL/
LUBRICANTS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Capacity (Approximate)

Recommended specifications

US measure

Imp measure

Liter

Power steering fluid (PSF)

Refill to the proper oil level according to the instructions in
the

“8. Maintenance and do-it-yourself” section.

. Genuine NISSAN PSF or equivalent

. DEXRON

VI type ATF may also be used.

Brake and clutch fluid

. Genuine NISSAN Super Heavy Duty Brake Fluid* or equivalent DOT 3

. *: Available in mainland USA through an INFINITI retailer.

Multi-purpose grease

NLGI No. 2 (Lithium soap base)

Without limited slip differential

—

With limited slip differential

—

Air conditioning system refrigerant

—

. HFC-134a (R-134a)

. For additional information, see “Vehicle identification” (P.9-11) for air

conditioner specification label.

Air conditioning system lubricants

—

NISSAN A/C System Oil Type S or exact equivalent

Window washer fluid

—

Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or
equivalent

Technical and consumer information

9-3

-------------------------------------------------------------------------------------------------------------------------------------------------------------

9-4

Technical and consumer information

FUEL INFORMATION

VQ37VHR engine

Use unleaded premium gasoline with an
octane rating of at least 91 AKI (Anti-Knock
Index) number (Research octane number
96).

If unleaded premium gasoline is not
available, unleaded regular gasoline with
an octane rating of 87 AKI number
(Research octane number 91) may be
temporarily used, but only under the
following precautions:
. Have the fuel tank filled only partially

with unleaded regular gasoline, and fill
up with unleaded premium gasoline as
soon as possible.

. Avoid full throttle driving and abrupt

acceleration.

Use unleaded premium gasoline for max-
imum vehicle performance.

CAUTION

. Using a fuel other than that specified

could adversely affect the emission
control systems, and may also affect
warranty coverage.

. Under no circumstances should a leaded

gasoline be used, since this will damage
the three way catalyst.

. Do not use E-15 or E-85 fuel in your

vehicle. Your vehicle is not designed to
run on E-15 or E-85 fuel. Using E-15 or E-
85 fuel in a vehicle not specifically
designed for E-15 or E-85 fuel can
adversely affect the emission control
devices and systems of the vehicle.
Damage caused by such fuel is not
covered by the INFINITI new vehicle
limited warranty.

. U.S. government regulations require

ethanol dispensing pumps to be identi-
fied by a small, square, orange and black
label with the common abbreviation or
the appropriate percentage for that
region.

Gasoline specifications

INFINITI recommends using gasoline that
meets the World-Wide Fuel Charter (WWFC)
specifications where it is available. Many
of the automobile manufacturers devel-
oped this specification to improve emis-
sion system and vehicle performance. Ask
your service station manager if the gaso-

line meets the World-Wide Fuel Charter
(WWFC) specifications.

Reformulated gasoline

Some fuel suppliers are now producing
reformulated gasolines. These gasolines
are specially designed to reduce vehicle
emissions. INFINITI supports efforts to-
wards cleaner air and suggests that you
use reformulated gasoline when available.

Gasoline containing oxygenates

Some fuel suppliers sell gasoline contain-
ing oxygenates such as ethanol, MTBE and
methanol with or without advertising their
presence. INFINITI does not recommend the
use of fuels of which the oxygenate content
and the fuel compatibility for your INFINITI
cannot be readily determined. If in doubt,
ask your service station manager.

If you use oxygenate-blend gasoline,
please take the following precautions as
the usage of such fuels may cause vehicle
performance problems and/or fuel system
damage.
. The fuel should be unleaded and have

an octane rating no lower than that
recommended for unleaded gasoline.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

. If an oxygenate-blend, excepting a

methanol blend, is used, it should
contain no more than 10% oxygenate.
(MTBE may, however, be added up to
15%.)

. E-15 fuel contains more than 10%

oxygenate. E-15 fuel will adversely
affect the emission control devices
and systems of the vehicle and should
not be used. Damage caused by such
fuel is not covered by the INFINITI new
vehicle limited warranty.

. If a methanol blend is used, it should

contain no more than 5% methanol
(methyl alcohol, wood alcohol). It
should also contain a suitable amount
of appropriate cosolvents and corro-
sion inhibitors. If not properly formu-
lated with appropriate cosolvents and
corrosion inhibitors, such methanol
blends may cause fuel system damage
and/or vehicle performance problems.
At this time, sufficient data is not
available to ensure that all methanol
blends are suitable for use in INFINITI
vehicles.

If any undesirable driveability problems
such as engine stalling or hard hot starting
are experienced after using oxygenate-

blend fuels, immediately change to a
non-oxygenate fuel or a fuel with a low
blend of MTBE.

Take care not to spill gasoline during
refueling. Gasoline containing oxygenates
can cause paint damage.

E-15 fuel

E-15 fuel is a mixture of approximately
15% fuel ethanol and 85% unleaded
gasoline. E-15 can only be used in vehicles
designed to run on E-15 fuel. Do not use E-
15 in your vehicle. U.S. government
regulations require fuel ethanol dispensing
pumps to be identified with small, square,
orange and black label with the common
abbreviation or the appropriate percentage
for that region.

E-85 fuel

E-85 fuel is a mixture of approximately
85% fuel ethanol and 15% unleaded
gasoline. E-85 can only be used in a
Flexible Fuel Vehicle (FFV). Do not use E-
85 fuel in your vehicle. U.S. government
regulations require fuel ethanol dispensing
pumps to be identified by a small, square,
orange and black label with the common
abbreviation or the appropriate percentage
for that region.

Aftermarket fuel additives

INFINITI does not recommend the use of
any aftermarket fuel additives (Example:
fuel injector cleaner, octane booster, intake
valve deposit removers, etc.) which are
sold commercially. Many of these additives
intended for gum, varnish or deposit
removal may contain active solvent or
similar ingredients that can be harmful to
the fuel system and engine.

Octane rating tips

Using unleaded gasoline with an octane
rating lower than recommended above can
cause persistent, heavy spark knock.
(Spark knock is a metallic rapping noise.)
If severe, this can lead to engine damage.
If you detect a persistent heavy spark
knock even when using gasoline of the
stated octane rating, or if you hear steady
spark knock while holding a steady speed
on level roads, have an INFINITI retailer
correct the condition. Failure to correct the
condition is misuse of the vehicle, for
which INFINITI is not responsible.

Incorrect ignition timing will result in
knocking, after-run or overheating. This in
turn may cause excessive fuel consumption
or damage to the engine. If any of the

Technical and consumer information

9-5

-------------------------------------------------------------------------------------------------------------------------------------------------------------

9-6

Technical and consumer information

above symptoms are encountered, have
your vehicle checked at an INFINITI retailer
or other competent service facility.

However, now and then you may notice
light spark knock for a short time while
accelerating or driving up hills. This is no
cause for concern, because you get the
greatest fuel benefit when there is light
spark knock for a short time under heavy
engine load.

JVT0159X

API certification mark

API service symbol

ENGINE OIL AND OIL FILTER RE-
COMMENDATION

Selecting the correct oil

It is essential to choose the correct grade,
quality, and viscosity engine oil to ensure
satisfactory engine life and performance,
see

“Capacities and recommended fuel/

lubricants

” (P.9-2). INFINITI recommends

the use of an energy conserving oil in
order to improve fuel economy.

Select only engine oils that meet the

American Petroleum Institute (API) certifi-
cation or International Lubricant Standar-
dization and Approval Committee (ILSAC)
certification and SAE viscosity standard.
These oils have the API certification mark
on the front of the container. Oils which do
not have the specified quality label should
not be used as they could cause engine
damage.

Oil additives

INFINITI does not recommend the use of oil
additives. The use of an oil additive is not
necessary when the proper oil type is used
and maintenance intervals are followed.

-------------------------------------------------------------------------------------------------------------------------------------------------------------

has been previously used should not be
used.

Oil viscosity

The engine oil viscosity or thickness
changes with temperature. Because of this,
it is important that the engine oil viscosity
be selected based on the temperatures at
which the vehicle will be operated before
the next oil change. Choosing an oil
viscosity other than that recommended
could cause serious engine damage.

Selecting the correct oil filter

Your new vehicle is equipped with a high-
quality genuine NISSAN oil filter. When
replacing, use the genuine oil filter or its
equivalent for the reason described in
change intervals.

Change intervals

The oil and oil filter change intervals for
your engine are based on the use of the
specified quality oils and filters. Oil and
filter other than the specified quality, or oil
and filter change intervals longer than
recommended could reduce engine life.
Damage to engines caused by improper
maintenance or use of incorrect oil and
filter quality and/or viscosity is not covered

by the new INFINITI vehicle limited warran-
ties.

Your engine was filled with a high quality
engine oil when it was built. You do not
have to change the oil before the first
recommended change interval. Oil and
filter change intervals depend upon how
you use your vehicle. Operation under the
following conditions may require more
frequent oil and filter changes.
. repeated short distance driving at cold

outside temperatures,

. driving in dusty conditions,
. extensive idling,
. stop and go “rush hour” traffic,
Refer to the

“INFINITI Service and Main-

tenance Guide

” for the maintenance sche-

dule.

AIR CONDITIONING SYSTEM RE-
FRIGERANT AND LUBRICANT RE-
COMMENDATIONS

The air conditioning system in your
INFINITI vehicle must be charged with the
refrigerant HFC-134a (R-134a) and the
lubricant, NISSAN A/C system oil Type S
or the exact equivalents.

CAUTION

The use of any other refrigerant or lubricant
will cause severe damage to the air con-
ditioning system and will require the repla-
cement of all air conditioner system
components.

The refrigerant HFC-134a (R-134a) in your
INFINITI vehicle will not harm the earth

’s

ozone layer. Although this refrigerant does
not affect the earth

’s atmosphere, certain

governmental regulations require the re-
covery and recycling of any refrigerant
during automotive air conditioning system
service. Your INFINITI retailer has the
trained technicians and equipment needed
to recover and recycle your air conditioning
system refrigerant.

Contact an INFINITI retailer when servicing
your air conditioning system.

Technical and consumer information

9-7

-------------------------------------------------------------------------------------------------------------------------------------------------------------

9-8

Technical and consumer information

ENGINE

Model

VQ37VHR

Type

Gasoline, 4-cycle

Cylinder arrangement

6-cylinder, V-slanted at 60

Bore

6 Stroke

in (mm)

3.760

6 3.385 (95.5 6 86.0)

Displacement

cu in (cm

)

225.54 (3,696)

Firing order

1-2-3-4-5-6

Idle speed

rpm

No adjustment is necessary.

Ignition timing (B.T.D.C.)

degree/rpm

Spark plug

Standard

FXE24HR-11

Spark plug gap (Normal)

in (mm)

0.043 (1.1)

Camshaft operation

Timing chain

This spark ignition system complies with the Canadian standard ICES-002.

STI0425

VQ37VHR engine

SPECIFICATIONS

-------------------------------------------------------------------------------------------------------------------------------------------------------------

WHEELS AND TIRES

Road wheel

Type

Size

Offset in (mm)

Aluminum

Front:
Rear:

6 8J

6 8-1/2J

1.69 (43)
1.06 (27)

Front:
Rear:

6 8-1/2J

6 9J

1.69 (43)
1.18 (30)

Spare*

6 4T

0 (0)

Tire

Type

Size

Pressure PSI (kPa) [Cold]

Conventional

Front:
Rear:

P225/50R18 94V
P245/45R18 96V

38 (260)

Front:
Rear:

225/45R19 96W XL
245/40R19 98W XL

39 (270)

Spare (T-type)*

T145/70R18 107M

60 (420)

*: if so equipped.

Technical and consumer information

9-9

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Infiniti Q60 Coupe (2014 year). Manual - part 27