|
|
INL-76 < PRECAUTION > PRECAUTIONS 5. When the repair work is completed, return the ignition switch to the ″LOCK″ position before connecting the battery cables. (At this time, the steering lock mechanism will engage.) 6. Perform a self-diagnosis check of all control units using CONSULT-III. General precautions for service operations INFOID:0000000005146753 • When removing or disassembling any part, be careful not to damage or deform it. Protect parts which may get in the way with cloth. • When removing parts with a screw driver or other tool, protect parts by wrapping them with vinyl or tape. • Keep removed parts protected with cloth. • If an non-reuseable part is removed, replace it with a new one. • After re-assembly has been completed, make sure each part functions correctly. • Never work with wet hands. • Turn the lighting switch OFF before disconnecting and connecting the connector. • Do not use organic solvent (paint thinner or gasoline) to clean lamps or remove sealant residue. |