|
|
CCS C1A26 ECD MODE MALFUNCTION CCS-115 < DTC/CIRCUIT DIAGNOSIS > [ICC] C D E F G H I J K L M B N P A C1A26 ECD MODE MALFUNCTION DTC Logic INFOID:0000000006224347 DTC DETECTION LOGIC NOTE: CCS-145, "ADAS CONTROL UNIT : DTC Logic" CCS-141, "ADAS CONTROL UNIT : DTC Logic" CCS-133, "ADAS CONTROL UNIT : DTC Logic" DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Start the engine. 2. Wait for approximately 1 minute after turning the MAIN switch of ICC system ON. 3. Perform “All DTC Reading” with CONSULT-III. 4. Check if the “C1A26” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS”. Is “C1A26” detected as the current malfunction? YES >> Refer to CCS-115, "Diagnosis Procedure" . NO >> Refer to GI-40, "Intermittent Incident" . Diagnosis Procedure INFOID:0000000006224348 1. CHECK SELF-DIAGNOSIS RESULTS Check if “U1000”, “U0415” or “U0121” is detected other than “C1A26” in “Self Diagnostic Result” of “ICC/ YES >> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to NO >> GO TO 2. 2. PERFORM SELF-DIAGNOSIS OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) Check if any DTC is detected in “Self Diagnostic Result” of “ABS”. YES >> Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to NO >> Replace ADAS control unit. Refer to DAS-63, "Removal and Installation" DTC (On board display) Trouble diagnosis name DTC detecting condition Possible cause C1A26 (26) ECD MODE MALF If an abnormal condition occurs with ECD system ABS actuator and electric unit (control |