|
|
REMOTE KEYLESS ENTRY SYSTEM BL-77 C D E F G H J K L M A B BL Malfunction Code Table NOTE: ● For a specific local control unit (LCU), either “PAST COMM DATA” or “PAST NO RESPONSE” may be displayed instead of the ● Follow the steps below to erase the memory ● With the battery connected, if the local control unit (LCU) connector is disconnected and left for approximately 1 minute, the BCM DATA MONITOR Malfunctioning item Display unit CONSULT-II IVMS communication diag- nosis content Self-diagnosis trouble code No. Malfunctioning system and reference COMM DATA One LCU is dis- POWER WINDOW C/U-DR 24 Replace the displayed DOOR MIRROR C/U-RH 27 DOOR MIRROR C/U-LH 37 POWER SEAT C/U-DR 47 Multiple LCUs BCM Displays in → 27 → 37 → 47 → and cycles from 24. Communication system A: NO One LCU is dis- POWER WINDOW C/U-DR 25 Communication system B: DOOR MIRROR C/U-RH 28 DOOR MIRROR C/U-LH 38 POWER SEAT C/U-DR 48 Multiple LCUs BCM/HARNESS Displays in → 28 → 38 → 4 8 and cycles Communication system C: . SLEEP malfunction One LCU is dis- POWER WINDOW C/U-DR No self-diagno- Replace the displayed DOOR MIRROR C/U-RH DOOR MIRROR C/U-LH POWER SEAT C/U-DR Multiple LCUs All the above control units are displayed. No self-diagno- Communication system A: Monitored item Description IGN KEY SW Indicates [ON/OFF] condition of ignition key switch. IGN ACC SW Indicates [ON/OFF] condition of ignition switch in ACC position. |