|
|
LAN TROUBLE DIAGNOSIS LAN-13 < FUNCTION DIAGNOSIS > [CAN FUNDAMENTAL] C D E F G H I J K L B A O P N Example: Data link connector branch line open circuit NOTE: not affected. Therefore, no symptoms occur. However, be sure to repair malfunctioning circuit. • The model (all units on CAN communication system are Diag on CAN) cannot perform CAN diagnosis with CONSULT-III if the following error occurs. The error is judged by the symptom. EPS control unit Normal operation. Combination meter • Shift position indicator and OD OFF indicator turn OFF. ABS actuator and electric unit (control unit) Normal operation. TCM No impact on operation. IPDM E/R Normal operation. Unit name Symptom SKIB8739E Unit name Symptom ECM Normal operation. BCM EPS control unit Combination meter ABS actuator and electric unit (control unit) TCM IPDM E/R Error Difference of symptom Data link connector branch line open circuit Normal operation. CAN-H, CAN-L harness short-circuit Most the units which are connected to the CAN communication |