Infiniti G35 (V35) Sedan. Manual - part 1159

FRONT SEAT

SE-103

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

K

L

M

A

B

SE

N

O

P

• Remove the pawls, and then remove side support bag (1).

9.

Remove the seat slide outer finisher.
• Remove the metal clip and pawls, and then pull out seat slide outer finisher (outside).
• Remove the metal clip, and then pull out seat slide outer finisher (inside).

10. Remove the seat slide inner finisher.

Remove the metal clip, and then pull out seat slide inner finisher.

Assembly

Assemble in the reverse order of disassembly.

CAUTION:

Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the pad side wire. 

: Pawl

JMJIA0022ZZ

: Metal clip

JMJIA0023ZZ

: Metal clip

JMJIA0024ZZ

SE-104

< ON-VEHICLE REPAIR >

REAR SEAT

REAR SEAT

Exploded View

INFOID:0000000000960567

REAR SEAT

ARMREST

1.

Seat cushion pad

2.

Seat cushion trim

3.

Seat cushion hook

4.

Seatback pad

5.

Seatback trim

6.

Armrest assembly

Refer to 

GI-4, "Components"

 for symbols in the figure.

JMJIA0026GB

JMJIA0029GB

REAR SEAT

SE-105

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

K

L

M

A

B

SE

N

O

P

Removal and Installation

INFOID:0000000000960568

REMOVAL

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.
1.

Remove the seat cushion.
• Pull the lock lever (1) at the front bottom of the seat cushion

forward (1 for each side), and pull the seat cushion upward to
release the wire (2) from the seat cushion hook. Then pull the
seat cushion forward to remove.

• Remove the seat cushion from the vehicle.

2.

Remove the seatback.
• Remove the nuts under seatback.
• Lift up seatback from underneath, and then remove seatback from seatback hook that is fixed to the

vehicle.

• Remove the seatback from the vehicle.

3.

Remove the armrest assembly.
• Remove the fastener.
• Remove the armrest mounting bolts.
• Remove the clip.
• Remove the armrest assembly from the vehicle.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

Disassembly and Assembly

INFOID:0000000000960569

SEATBACK

Disassembly

Remove the hog rings, and separate the trim and pad.

Assembly

Assemble in the reverse order of disassembly.

SEAT CUSHION

Disassembly

Remove the hog rings, and separate the trim and pad.

Assembly

Assemble in the reverse order of disassembly.

ARMREST

Disassembly

1.

Remove the screws, and then remove the cup holder.

2.

Remove the screws, and then remove the armrest side console

1.

Cup holder

2.

Armrest side console

3.

Armrest bracket

4.

Armrest bracket outer cover

5.

bushing

6.

Armrest trim and pad

Refer to 

GI-4, "Components"

 for symbols in the figure.

JMJIA0251ZZ

SE-106

< ON-VEHICLE REPAIR >

REAR SEAT

3.

Remove the bolts, and then remove the armrest bracket.

4.

Remove the armrest bracket outer cover from armrest bracket.

Assembly

Assemble in the reverse order of disassembly.