Infiniti FX35, FX50 (S51). Manual - part 1973

WASHER PUMP

WW-115

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

WASHER PUMP

Exploded View

INFOID:0000000005234790

Removal and Installation

INFOID:0000000005234791

REMOVAL

1.

Remove the fender protector RH (front). Refer to 

EXT-25, "FENDER PROTECTOR : Exploded View"

.

2.

Disconnect the washer pump connector.

3.

Disconnect the front washer tube and rear washer tube.

4.

Remove the washer pump from the washer tank.

5.

Remove the packing from the washer tank.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

Never twist the packing when installing the washer pump.

1.

Washer pump connector

2.

Rear washer tube

3.

Washer pump

4.

Front washer tube

5.

Packing

6.

Washer tank

: Vehicle front

JPLIA1227ZZ

WW-116

< REMOVAL AND INSTALLATION >

WASHER LEVEL SWITCH

WASHER LEVEL SWITCH

Removal and Installation

INFOID:0000000005234792

The washer level switch must be replaced together with the washer tank as an assembly. Refer to 

WW-114,

"Removal and Installation"

.

FRONT WASHER NOZZLE AND TUBE

WW-117

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

FRONT WASHER NOZZLE AND TUBE

Hydraulic Layout

INFOID:0000000005234793

Removal and Installation

INFOID:0000000005234794

REMOVAL

1.

Open the hood.

2.

Use the stop point of washer nozzle (1) as the support point and
rotate nozzle to remove it from body, while pushing nozzle spray
point side along the hood.

3.

Disconnect the washer tube (2) from the washer nozzle.

INSTALLATION

1.

Connect the washer tube into the washer nozzle.

2.

Install the washer nozzle to the hood.

3.

Adjust the washer nozzle spray position. Refer to 

WW-117, "Inspection and Adjustment"

.

CAUTION:

The spray positions differ. Check that left and right nozzles are installed correctly.

Inspection and Adjustment

INFOID:0000000005234795

INSPECTION

Washer Nozzle Inspection

1.

Front washer tube

2.

Front washer nozzle

3.

Front washer tube

4.

Washer tank

: Clip A

: Clip B

JPLIA1228ZZ

JPLIA0561ZZ

WW-118

< REMOVAL AND INSTALLATION >

FRONT WASHER NOZZLE AND TUBE

Check that air can pass through the hose by blowing forward (toward
the nozzle), and check that air cannot pass through by sucking.

ADJUSTMENT

Washer Nozzle Spray Position Adjustment

Adjust spray positions to match the positions shown in the figure.

Unit: mm (in)

JPLIA0562ZZ

1.

Black printed frame line

: Spray area

: Target spray position

Spray position

H

L

X

Y

S

A

204 (8.03)

486 (19.13)

80 (3.15)

226 (8.90)

79 (3.11)

B

274 (10.79)

358 (14.09)

80 (3.15)

319 (12.56)

99 (3.90)

C

274 (10.79)

124 (4.88)

80 (3.15)

332 (13.07)

96 (3.78)

D

269 (10.59)

126 (4.96)

80 (3.15)

304 (11.97)

93 (3.66)

E

298 (11.73)

253 (9.96)

80 (3.15)

332 (13.07)

94 (3.70)

F

239 (9.41)

466 (18.35)

80 (3.15)

295 (11.61)

91 (3.58)

JPLIA1229ZZ