Hyundai Elantra N (2022 year). Manual in english - page 4

 

  Index      Manuals     Hyundai Elantra N (2022 year). Manual in english

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..

 

 

 

Hyundai Elantra N (2022 year). Manual in english - page 4

 

 

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Outside Temperature Gauge
Odometer
Normal mode
N mode
Normal mode
N mode
OCN7N041129N
OCN7N041124N
OCN7040015N
OCN7N041135N
This gauge indicates the current outside
The odometer indicates the total
air temperatures either in Celsius (°C) or
distance that the vehicle has been
Fahrenheit.
driven and should be used to determine
when periodic maintenance should be
- Temperature range : -40°F ~ 140°F
(-40°C ~ 60°C)
performed.
The outside temperature on the display
may not immediately change like a
general thermometer not to distract the
driver.
The temperature unit (from °F to °C or
from °C to °F ) can be changed by:
- Settings menu in the infotainment
system screen : Setup → General
Settings → Unit → Temperature Unit →
°F/°C
- Automatic climate control system :
While pressing the OFF button, press
the AUTO button for 3 seconds or
more.
The temperature unit of the instrument
cluster and climate control system will
change at once.
4-8

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Distance to empty
Fuel economy (Normal mode)
Normal mode
N mode
OCN7040016N
OOSN041023N
OCN7N041114N
The distance to empty is the
The average fuel economy (1) and instant
estimated distance the vehicle can be
fuel economy (2) is displayed at the
driven with the remaining fuel.
bottom of the cluster.
If the estimated distance is below
1 mi. (1 km), the trip computer will
Automatic reset
display “---” as distance to empty.
To automatically reset the average fuel
economy, select between "After Ignition“
or "After Refueling" from the Settings
Information
menu in the infotainment system screen.
If the vehicle is not on level ground or
the battery power has been interrupted,
CUSTOM mode settings
the distance to empty function may not
operate correctly.
The distance to empty may differ
from the actual driving distance as it
is an estimate of the available driving
distance.
The trip computer may not register
additional fuel if less than 1.6 gallon (6
liters) of fuel are added to the vehicle.
The distance to empty may vary
significantly based on driving
conditions, driving habits, and
OCN7N041136N
condition of the vehicle.
The main settings of CUSTOM mode is
displayed at the bottom of the cluster.
The CUSTOM mode can be set on the
infotainment system.
Information
For more details on the CUSTOM mode,
refer to “Drive Mode Integrated Control
System” section in chapter 6.
4-9

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Transmission Shift Indicator
Normal mode
Normal mode
OOSN041036N
N mode
OCN7040013
N mode
OBC3N040020
In the manual shift mode, this indicator
OCN7N041138N
informs which gear is desired while
This indicator displays which shift lever
driving to save fuel.
position is selected.
• Dual clutch transmission shift
• Park : P
indicator
• Reverse : R
- Shifting up : ▲2, ▲3, ▲4, ▲5,
• Neutral : N
▲6, ▲7, ▲8
• Drive : D
- Shifting down : ▼1, ▼2, ▼3, ▼4,
• Manual shift mode : D1, D2, D3, D4,
▼5, ▼6, ▼7
D5, D6, D7, D8
For example
: Indicates that shifting up to the 3rd
gear is desired (currently the shift
lever is in the 2nd or 1st gear).
: Indicates that shifting down to the
3rd gear is desired (currently the
shift lever is in the 4th, 5th, or 6th
gear).
When the system is not working properly,
the indicator is not displayed.
4-10

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Warning and Indicator Lights
Parking Brake & Brake Fluid
Warning Light
Information
This warning light illuminates:
Make sure that all warning lights are OFF
• When you set the Engine Start/Stop
after starting the engine. If any light is still
button to the ON position.
ON, this indicates a situation that needs
- The parking brake light illuminates
attention.
for about 3 seconds and will then
turn off once the parking brake is
Air Bag Warning Light
released.
• Whenever the parking brake is
applied.
This warning light illuminates:
• Whenever the brake fluid level in the
• When you set the Engine Start/Stop
reservoir is low.
button to the ON position.
- If the warning light illuminates
- The air bag warning light illuminates
with the parking brake released, it
for about 6 seconds and then turns
indicates that the brake fluid level in
off when all checks have been
the reservoir is low.
performed
• The air bag warning light will remain
If the brake fluid level in the reservoir is
illuminated if there is a malfunction
low:
with the Safety Restraint System (SRS)
1. Drive carefully to the nearest safe
air bag operation.
location and stop your vehicle.
In this case, have the vehicle
2. With the engine stopped, check
inspected by an authorized HYUNDAI
the brake fluid level immediately
dealer.
and add fluid as required (For more
information, refer to "Brake Fluid" in
chapter 9). After adding brake fluid,
Seat Belt Warning Light
check all brake components for fluid
leaks. If a brake fluid leak is found, or
if the warning light remains on, or if
This warning light informs the driver that
the brakes do not operate properly, do
the seat belt is not fastened.
not drive the vehicle. Have the vehicle
inspected by an authorized HYUNDAI
For more information, refer to “Seat
Belts” in chapter 3.
dealer.
4-11

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Dual-diagonal braking system
Anti-lock Brake System (ABS)
warning light
Your vehicle is equipped with
dualdiagonal braking systems. This
means you still have braking on two
This warning light illuminates:
wheels even if one of the dual systems
• When you set the Engine Start/Stop
should fail.
button to the ON position.
With only one of the dual systems
- It illuminates for approximately 3
working, more than normal pedal travel
seconds and then goes off.
and greater pedal pressure are required
to stop the vehicle.
• When there is a malfunction with
the ABS (The normal braking system
Also, the vehicle will not stop in as short
will still be operational without the
a distance with only a portion of the
assistance of the anti-lock brake
brake system working.
system).
If the brakes fail while you are driving,
In this case, have the vehicle
shift to a lower gear for additional engine
inspected by an authorized HYUNDAI
braking and stop the vehicle as soon as it
dealer.
is safe to do so.
Electronic Brake Force
WARNING
Distribution System Warning
Light
Parking Brake & Brake Fluid Warning
Light
Driving the vehicle with a warning light
ON is dangerous. If the Parking Brake &
Brake Fluid Warning Light illuminates
These two warning lights illuminate at the
with the parking brake released, it
same time while driving:
indicates that the brake fluid level is
• When the ABS and regular brake
low.
system may not work normally.
In this case, have the vehicle inspected
In this case, have the vehicle
by an authorized HYUNDAI dealer.
inspected by an authorized HYUNDAI
dealer.
4-12

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Malfunction Indicator Lamp
WARNING
(MIL)
Electronic Brake Force Distribution
System Warning Light
This warning light illuminates:
When both ABS and Parking Brake &
• When you set the Engine Start/Stop
Brake Fluid Warning Lights are on, the
button to the ON position.
brake system will not work normally
and you may experience an unexpected
- The malfunction indicator light
and dangerous situation during sudden
illuminates for about 3 seconds and
braking.
then goes off.
In this case, avoid high speed driving
• Whenever there is a malfunction with
and abrupt braking.
either the emission control system or
the engine or the vehicle powertrain.
Have the vehicle inspected by an
authorized HYUNDAI dealer as soon as
If this occurs, have the vehicle
possible.
inspected by an authorized HYUNDAI
dealer.
Information
NOTICE
Electronic Brake Force Distribution
Driving with the Malfunction Indicator
System Warning Light
Lamp (MIL) on may cause damage to
When the ABS Warning Light is on
the emission control system which
or both ABS and Parking Brake &
could affect drivability and/or fuel
Brake Fluid Warning Lights are on, the
economy.
speedometer, odometer, or tripmeter may
not work. Also, the EPS Warning Light
NOTICE
may illuminate and the steering effort may
increase or decrease.
If the Malfunction Indicator Lamp
In this case, have the vehicle inspected by
(MIL) illuminates, potential catalytic
an authorized HYUNDAI dealer as soon
converter damage is possible which
as possible.
could result in loss of engine power.
In this case, have the vehicle inspected
by an authorized HYUNDAI dealer as
soon as possible.
4-13

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Charging System Warning
Engine Oil Level Warning
Light
Light
This warning light illuminates:
The engine oil level warning light
illuminates when the engine oil level
• When there is a malfunction with
either the alternator or electrical
should be checked.
charging system
If the warning light comes on, check the
engine oil level as soon as possible and
If there is a malfunction with either the
add engine oil as required.
alternator or electrical charging system:
Slowly pour the recommended oil little
1. Drive carefully to the nearest safe
by little into a funnel. (Oil refill capacity :
location and stop your vehicle.
approximately 0.6 ~ 1.0 ℓ)
2. Turn the engine off and check the
Use only the specified engine oil. (Refer
alternator drive belt for looseness or
to “Recommended lubricants and
breakage.
capacities” in chapter 2.)
If the belt is adjusted properly, there may
Do not overfill the engine oil. Make sure
be a problem in the electrical charging
the oil level is not above F (Full) mark on
system.
the dipstick.
In this case, have the vehicle inspected
by an authorized HYUNDAI dealer as
Information
soon as possible.
If you travel approximately 30 ~ 60
miles (50 km ~100 km) after the engine
warms up, after adding the engine oil,
the warning light will go off.
Cycle the ignition from OFF to ON 3
times within 10 seconds, the warning
light will go off immediately. However,
when you turn off the warning light
without adding the engine oil, the light
will come on again after traveling
approximately 30 ~ 60 miles (50 ~ 100
km) after the engine warms up.
NOTICE
If the light comes on continuously after
adding the engine oil and travelling
approximately 30 ~ 60 miles (50~100
km) after the engine warms up, have
the system checked by an authorized
HYUNDAI dealer.
Even if this light doesn’t come on after
the engine has started, the engine oil
level should be periodically checked
and topped up if required.
4-14

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Engine Oil Pressure Warning
Low Fuel Level Warning Light
Light
This warning light illuminates:
This warning light illuminates:
When the engine oil pressure is low.
When the fuel tank is nearly empty. Add
fuel as soon as possible.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe
NOTICE
location and stop your vehicle.
Driving with the Low Fuel Level warning
2. Turn the engine off and check
light on or with the fuel level below
the engine oil level (For more
“E(Empty)” can cause the engine to
information, refer to "Engine Oil" in
misfire and damage the catalytic
chapter 9). If the level is low, add oil
converter (if equipped).
as required.
If the warning light remains on after
Master Warning Light
adding oil or if oil is not available, have
the vehicle inspected by an authorized
HYUNDAI dealer as soon as possible.
This warning light illuminates:
Continued driving with the warning
When there is a malfunction in operation
light on may cause engine failure.
in any of the following systems:
- Forward Collision-Avoidance Assist
NOTICE
system malfunction (if equipped)
If the engine is not turned OFF
- Blind-Spot Collision Warning
immediately after the Engine
malfunction (if equipped)
Oil Pressure Warning Light is
- Blind-Spot Collision Warning radar
illuminated, severe damage could
blocked (if equipped)
occur.
- High Beam Assist malfunction
If the warning light stays on while the
engine is running, it indicates that
- Lamp malfunction (if equipped)
there may be serious engine damage
- Tire Pressure Monitoring System
or malfunction. In this case:
(TPMS) malfunction
1. Stop the vehicle as soon as it is
- LED head lamp malfunction (if
safe to do so.
equipped)
2. Turn off the engine and check the
To identify the details of the warning,
oil level. If the oil level is low, fill
look at the LCD display.
the engine oil to the proper level.
3. Start the engine again. If the
warning light stays on after the
engine has started, turn the
engine off immediately. In this
case, have the vehicle inspected
by an authorized HYUNDAI dealer.
4-15

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Low Tire Pressure Warning
Electronic Stability Control
Light
(ESC) Indicator Light
This warning light illuminates:
This indicator light illuminates:
• When you set the Engine Start/Stop
• When you set the Engine Start/Stop
button to the ON position.
button to the ON position.
- It illuminates for approximately 3
- The Electronic Stability Control
seconds and then goes off.
indicator light illuminates for about
3 seconds and then goes off.
• When one or more of your tires are
significantly underinflated. (The
• Whenever there is a malfunction with
location of the underinflated tires is
the ESC system.
displayed on the LCD display.)
If this occurs, have the vehicle
For more information, refer to "Tire
inspected by an authorized HYUNDAI
Pressure Monitoring System (TPMS)" in
dealer.
chapter 8.
This indicator light blinks:
This warning light remains ON after
While the ESC is operating.
blinking for approximately 60 seconds, or
For more information, refer to
repeatedly blinks ON and OFF in 3 second
“Electronic Stability Control (ESC)” in
intervals:
chapter 6.
When there is a malfunction with the
TPMS.
In this case, have the vehicle inspected
by an authorized HYUNDAI dealer as
soon as possible.
For more information, refer to "Tire
Pressure Monitoring System (TPMS)" in
chapter 8.
WARNING
Safe Stopping
The TPMS cannot alert you to severe
and sudden tire damage caused by
external factors.
If you notice any vehicle instability,
immediately take your foot off the
accelerator pedal, apply the brakes
gradually with light force, and slowly
move to a safe position off the road.
4-16

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Electronic Stability Control
Immobilizer Indicator Light
(ESC) OFF Indicator Light
(with smart key)
(if equipped)
This indicator light illuminates:
This indicator light illuminates for up to
• When you set the Engine Start/Stop
30 seconds:
button to the ON position.
When the vehicle detects the smart key
- It illuminates for approximately 3
in the vehicle with the Engine Start/Stop
seconds and then goes off.
button in the ACC or ON position.
• When you deactivate the ESC system
- Once the smart key is detected, you
by pressing the ESC OFF button.
can start the engine.
For more information, refer to
- The indicator light goes off after
“Electronic Stability Control (ESC)” in
starting the engine.
chapter 6.
This indicator light blinks for a few seconds:
When the smart key is not in the vehicle.
- If the smart key is not detected, you
cannot start the engine.
This indicator light illuminates for 2
seconds and goes off:
If the smart key is in the vehicle and the
Engine Start/Stop button is ON, but the
vehicle cannot detect the smart key.
In this case, have the vehicle inspected
by an authorized HYUNDAI dealer.
This indicator light blinks:
When there is a malfunction with the
immobilizer system.
In this case, have the vehicle inspected
by an authorized HYUNDAI dealer.
4-17

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Turn Signal Indicator Light
LED headlight warning light
(if equipped)
This indicator light blinks:
This warning light illuminates:
When you operate the turn signal
• When you set the Engine Start/Stop
indicator stalk.
button to the ON position.
- The LED headlight warning light
If any of the following occur, there may be
illuminates for approximately 3
a malfunction with the turn signal system.
seconds and then goes off.
- The turn signal indicator light
• Whenever there is a malfunction with
illuminates but does not blink
the LED headlight.
- The turn signal indicator light blinks
If this occurs, have your vehicle
rapidly
inspected by an authorized HYUNDAI
- The turn signal indicator light does not
dealer.
illuminate at all
If any of these conditions occur, have
NOTICE
your vehicle inspected by an authorized
Continuous driving with the LED
HYUNDAI dealer.
Headlight warning light on or blinking
For more details, refer to “High Beam
can reduce LED headlight life.
Assist (HBA)” in chapter 5.
High Beam Indicator Light
Exterior Light Warning Light
(if equipped)
This indicator light illuminates:
This warning light illuminates:
• When the headlights are on and in the
• When one of the exterior bulbs
high beam position.
(headlamp, DRL, turn signal lamp,
• When the turn signal lever is pulled
stop lamp, etc) is not operating
into the Flash-to-Pass position.
properly. One of the bulbs may need
to be replaced.
Light ON Indicator Light
Information
Make sure to replace the burned out bulb
This indicator light illuminates:
with a new one of the same wattage rating.
When the tail lights or headlamps are on.
4-18

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Low Beam Indicator Light (if
Lane Safety Indicator Light
equipped)
This indicator light illuminates:
This indicator light illuminates:
• When the headlamps are on.
[Green] When you activate Lane
Keeping Assist by pressing the Lane
Safety button and all of the function
High Beam Assist indicator
operating conditions are satisfied.
light
[White] When Lane Keeping Assist
operating conditions are not satisfied
This indicator light illuminates:
or when the sensor does not detect
• When the High Beam is on with the
the lane line.
light switch in the AUTO light position.
[Yellow] When there is a malfunction
• If your vehicle detects oncoming or
with Lane Keeping Assist.
preceding vehicles, High Beam Assist
In this case, have your vehicle inspected
system will switch the high beam to
by an authorized HYUNDAI dealer.
low beam automatically.
For more information, refer to "Lane
For more information, refer to "High
Keeping Assist (LKA)" in chapter 7.
Beam Assist (HBA)" in chapter 5.
Cruise Indicator Light
Forward Safety Warning
Light
This indicator light illuminates:
This warning light illuminates:
• When Cruise Control is enabled.
• When you set the ignition switch or
For more details, refer to “Cruise
Engine Start/Stop button to the ON
Control (CC)” in chapter 6.
position.
- It illuminates for approximately 3
SPORT Mode Indicator Light
seconds and then goes off.
(if equipped)
• When there is a malfunction with
Forward Collision-Avoidance Assist. In
This indicator light illuminates:
this case, have your vehicle inspected
by an authorized dealer of HYUNDAI.
• When you select “SPORT” mode as
For more information, refer to "Forward
drive mode.
Collision-Avoidance Assist (FCA)" in
For more details, refer to “Drive Mode
chapter 7.
Integrated Control System” in chapter
6.
4-19

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
ECO Mode Indicator Light (if
Icy Road Warning Light (if
equipped)
equipped)
This indicator light illuminates:
This indicator light illuminates:
• When you select “ECO” mode as drive
This warning light is to warn the driver
mode.
the road may be icy.
For more details, refer to “Drive Mode
When the temperature on the outside
Integrated Control System” in chapter
temperature gauge is approximately
6.
below 4°C (40°F), the Icy Road Warning
Light and Outside Temperature Gauge
N Mode Indicator Light
blinks and then illuminates. Also, the
warning chime sounds 1 time.
The Icy Road Warning function can be
This indicator light illuminates:
activated or deactivated from the User
Settings mode in the cluster LCD display.
• When you select “N” mode as drive
mode.
For more details, refer to “Drive Mode
Information
Integrated Control System” in chapter
If the icy road warning light appears while
6.
driving, you should drive more attentively
and safely, refraining from over-speeding,
CUSTOM Mode Indicator
rapid acceleration, sudden braking or
Light
sharp turning, etc.
This indicator light illuminates:
• When you select “CUSTOM” mode as
drive mode.
For more details, refer to “Drive Mode
Integrated Control System” in chapter
6.
REV (Rev Matching) Indicator
Light
5(9
This indicator light illuminates:
[White] When Rev Matching is turn on
in NORMAL mode.
[Yellow] When Rev Matching is turned
on in SPORT mode.
[Red] When Rev Matching is turned on
in N mode.
For more details, refer to “Rev
Matching“ in chapter 6.
4-20

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
LCD Display Messages
Shift to P (for smart key system and
dual clutch transmission)
Key not in vehicle (for smart key
system)
This warning message is displayed if you
try to turn off the engine without the
This warning message is displayed if the
shift lever in P (Park) position.
smart key is not in the vehicle when you
open or close door in the ACC position or
At this time, the Engine Start/Stop button
ON position. The warning sound is heard
turns to the ACC position (If you press
when you close door without a smart key
the Engine Start/Stop button once more,
in vehicle.
it will turn to the ON position).
When attempting to start the vehicle
Press brake pedal to start engine (for
always have the smart key with you.
smart key system and dual clutch
Key not detected (for smart key
transmission)
system)
This warning message is displayed if the
Engine Start/Stop button changes to
This warning message is displayed if the
smart key is not detected when you press
the ACC position twice by pressing the
button repeatedly without depressing
the Engine Start/Stop button.
the brake pedal.
Press START button with key (for
You can start the vehicle by depressing
smart key system)
the brake pedal.
This warning message is displayed if you
Press clutch pedal to start engine
press the Engine Start/Stop button while
(for smart key system and manual
the warning message “Key not detected”
transmission)
is displayed.
At this time, the immobilizer indicator
This warning message is displayed if the
light blinks.
Engine Start/Stop button is in the ACC
position twice by pressing the button
Press START button again (for smart
repeatedly without depressing the clutch
pedal.
key system)
Depress the clutch pedal to start the
This message is displayed if you were
engine.
unable to start the vehicle when the
Engine Start/Stop button was pressed.
Press START button again (for smart
If this occurs, attempt to start the engine
key system)
by pressing the Engine Start/Stop button
again.
This message is displayed if you were
unable to start the vehicle when the
If the warning message appears each
Engine Start/Stop button was pressed.
time you press the Engine Start/Stop
button, have your vehicle inspected by
If this occurs, attempt to start the engine
an authorized HYUNDAI dealer.
by pressing the Engine Start/ Stop button
again.
Low Key Battery (for smart key
If the warning message appears each
system)
time you press the Engine Start/Stop
button, have your vehicle inspected by
This warning message is displayed if the
an authorized HYUNDAI dealer.
battery of the smart key is discharged
while changing the Engine Start/Stop
button to the OFF position.
4-21

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Check BRAKE SWITCH fuse (for
Door, Hood, Trunk open indicator
smart key system and dual clutch
transmission)
This warning message is displayed if the
brake switch fuse is disconnected.
You need to replace the fuse with a new
one. If that is not possible, you can start
the engine by pressing the Engine Start/
Stop button for 10 seconds in the ACC
position.
Shift to P or N to start engine (for
smart key system and dual clutch
OCN7N041017L
transmission)
This warning is displayed indicating
which door, or hood, or trunk is open.
This warning message is displayed if you
try to start the engine with the shift lever
not in the P (Park) or N (Neutral) position.
CAUTION
Before driving the vehicle, you should
Information
confirm that the door/ hood/trunk is
fully closed. Also, check there is no
You can start the engine with the shift
door/hood/ trunk open warning light or
lever in the N (Neutral) position. But, for
message displayed on the instrument
your safety, we recommend that you start
cluster.
the engine with the shift lever in the P
(Park) position.
Sunroof open indicator (if equipped)
Battery discharging due to external
electrical devices (if equipped)
This message is displayed if the battery
voltage is weak due to any non-factory
electrical accessories (ex. dashboard
camera) while parking. Be careful that
the battery is not discharged.
If the warning message appears after
removing the non-factory electrical
accessories, have the vehicle inspected
by an authorized HYUNDAI dealer.
OCN7N041018L
This warning is displayed if you turn off
the engine when the sunroof is open.
Close the sunroof securely when leaving
your vehicle.
4-22

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Lights mode
Low pressure
OIK040075L
OCN7N041026L
This indicator displays which exterior
This warning message is displayed if the
light is selected using the lighting
tire pressure is low. The corresponding
control.
tire on the vehicle will be illuminated.
For more details, refer to “Tire Pressure
Wiper mode
Monitoring System (TPMS)” in chapter
8.
Heated Steering Wheel turned off (if
equipped)
This message is displayed if you turn off
the heated steering wheel.
For more details, refer to “Heated
Steering Wheel” in chapter 5.
Low washer fluid (if equipped)
OIK040077L
This warning message is displayed if
the washer fluid level in the reservoir is
This indicator displays which wiper speed
nearly empty.
is selected using the wiper control.
Have the washer fluid reservoir refilled.
4-23

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Low fuel
Check turn signal (if equipped)
This warning message is displayed if the
This warning message is displayed if
fuel tank is almost out of fuel.
the turn signal lamps are not operat-
ing properly. A lamp may need to be
When this message is displayed, the low
replaced.
fuel level warning light in the cluster will
come on.
Make sure to replace the burned out
bulb with a new one of the same wattage
It is recommended to look for the nearest
rating.
fueling station and refuel as soon as
possible.
Check brake light (if equipped)
Engine Overheated (if equipped)
This warning message is displayed if the
stop lamps are not operating properly. A
This warning message is displayed
lamp may need to be replaced.
when the engine coolant temperature
is above 248°F (120°C). This means that
Make sure to replace the burned out
the engine is overheated and may be
bulb with a new one of the same wattage
damaged.
rating.
If your vehicle is overheated, refer to
“Overheating” in chapter 8.
Check daytime running light (if
equipped)
Check headlight (High) (if equipped)
This warning message is displayed
This warning message is displayed if the
if the daytime running lights are not
headlamps are not operating properly.
operating properly. A lamp may need to
be replaced.
In addition, if a specific lamp(turn signal
Make sure to replace the burned out
lamp etc.) is not operating properly, the
warning message according to a specific
bulb with a new one of the same wattage
rating.
lamp (turn signal lamp etc.) is displayed.
A corresponding bulb may need to be
replaced.
Check high mounted brake light (if
equipped)
Make sure to replace the burned out
bulb with a new one of the same wattage
This warning message is displayed if
rating.
the high mounted stop lamp are not
operating properly. A lamp may need to
Check headlight (Low) (if equipped)
be replaced.
This warning message is displayed if
Make sure to replace the burned out
the headlamp (Low) are not operating
bulb with a new one of the same wattage
properly.
rating.
In addition, if a specific lamp(turn signal
Check headlight LED (if equipped)
lamp etc.) is not operating properly, the
warning message according to a specific
This warning message is displayed
lamp (turn signal lamp etc.) is displayed.
if there is a problem with the LED
A corresponding bulb may need to be
headlight. We recommend that you have
replaced.
the vehicle inspected by an authorized
HYUNDAI dealer.
Make sure to replace the burned out
bulb with a new one of the same wattage
rating
4-24

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
LCD DISPLAY
LCD Display Control
OCN7N071128L
The LCD display modes can be changed by using the control buttons.
Switch
Function
MODE button for changing modes
,
MOVE switch for changing items
OK
SELECT/RESET button for setting or resetting the selected item
4-25

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
View Modes
View modes
Symbol
Explanation
This mode displays the state of :
- Lane Keeping Assist
Driving Assist
- Driver Attention Warning
For more information, refer to “Lane Keeping Assist
(LKA)", "Driver Attention Warning (DAW)" in chapter 7.
The Sport menu displays Oil Temp./Engine Temp., Turbo/
Sport
Torque, Lap Timer and G-Force.
For more details, refer to the following pages.
This mode displays driving information such as the
Trip
tripmeter, fuel economy, etc.
Computer
For more details, refer to "Trip Computer" in this chapter.
Turn By Turn
This mode displays the state of the navigation.
(TBT)
In this mode, you can change settings of the doors, lamps,
User Settings
etc.
- This mode displays warning messages related to the
Warning
system malfunction, etc.
- Tire pressure information
The information provided may differ depending on which functions are applicable
to your vehicle.
4-26

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Driving Assist mode
Sport view
OCN7N071141L
OOSN041026N
LKA
Oil Temp./Engine Temp.
This mode displays the state of Lane
This mode displays information related
Keeping Assist.
to your engine such as oil temperature (1)
and engine temperature (2).
For more details, refer to each function
information in chapter 7.
OCN7N041137N
OSU2B071088
Turbo/Torque
Driver Attention Warning
This mode displays information related to
This mode displays the state of Driver
your engine such as turbo (3) and torque
Attention Warning.
(4).
For more details, refer to "Driver
Attention Warning (DAW)" in chapter 7.
4-27

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
OBC3N040026
OBC3N040028
To reset (C):
Press and hold the OK button for more
than 1 second on the steering wheel
when the lap timer has stopped counting
the current lap (2).
To save laps:
Press the OK button shortly on the
steering wheel while the lap timer is
counting the current lap (2).
OBC3N040027
From best lap (1) to No.4 lap (3) will be
Lap timer
displayed.
(1) Best lap
Press the OK button for more than 1
second on the steering wheel to reset the
(2) Current lap
lap. Then the driver can start a new lap.
To start (A)
Press the OK button shortly on the
Information
steering wheel. The lap timer will start
Lap timer can be activated regardless of
counting the current lap (2).
the mode settings (Drive mode or N mode).
To stop (B)
NOTICE
Press and hold the OK button for more
If the N1(N2) button is set to 'Start
than 1 second on the steering wheel
lap timer', the N2(N1) button is
while the lap timer is counting the
automatically set to 'Stop & Reset lap
current lap (2).
timer' from the infotainment system.
Then the driver can operate lap timer
using the N1/N2 buttons as the one pair.
For more details, please refer to the
infotainment system manual separately
supplied.
4-28

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Trip computer mode
OBC3N040029
G-Force
OOSN041024N
This mode displays the force delivered to
The trip computer mode displays
the vehicle laterally while the vehicle is
information related to vehicle driving
in motion.
parameters including fuel economy,
tripmeter information and vehicle speed.
For more information, refer to "Trip
Computer" in this chapter.
Turn By Turn (TBT) mode
OIK047147N
Turn-by-turn navigation, distance/time
to destination information is displayed
when Turn by Turn view is selected.
4-29

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
Master warning mode
OCN7N041115L
OIG059097L
Tire Pressure
This warning light informs the driver the
This mode displays information related to
following situations.
Tire Pressure.
- Forward Collision-Avoidance Assist
For more details, refer to "Tire Pressure
malfunction
Monitoring System (TPMS)" in chapter
8.
- Blind-Spot Collision Warning
malfunction (if equipped)
- Blind-Spot Collision Warning radar
blocked (if equipped)
- LED headlamp malfunction
(if equipped)
- High Beam Assist malfunction
- Tire Pressure Monitoring System
(TPMS) malfunction
The Master Warning Light illuminates
if one or more of the above warning
situations occur.
At this time, a Master Warning icon (
)
will appear beside the User Settings icon
(
), on the LCD display.
If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.
4-30

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
User Settings Mode
Shift to P to edit settings / Engage parking
brake to edit settings
This warning message illuminates if
you try to select an item from the User
Settings mode while driving.
• Dual clutch transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
• Manual transmission
For your safety, change the User
OCN7040038L
Settings after engaging the parking
In this mode, you can change the
brake.
settings of the instrument cluster, doors,
lamps, etc.
Quick guide (Help)
1. Driver assistance
This mode provides quick guides for the
2. Door
systems in the User Settings mode.
3. Lights
Select an item, press and hold the OK
4. Sound
button.
5. Convenience
For more details about each system,
refer to this Owner’s Manual.
6. Service interval
7. Theme selection
8. Other
Information
9. Language
When the infotainment system is applied,
only the User’s Setting mode on the
10.Reset
infotainment system is supported but the
The information provided may differ
User’s Setting mode on the instrument
depending on which functions are
cluster is not supported.
applicable to your vehicle.
4-31

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
1. Driver Assistance
Items
Explanation
Driving Safety
Automatically disabling of the driving safety systems when N mode is
Auto OFF in N
selected.
mode
To adjust the warning timing of the driver assistance system.
Warning Timing
• Standard / Late
To adjust the warning volume of the driver assistance system.
Warning Volume
• High / Medium / Low
• Leading Vehicle Departure Alert
To activate or deactivate Leading Vehicle Departure Alert.
Driver Attention
• Inattentive Driving Warning
Warning
To alert the driver's inattentive driving.
For more details, refer to "Driver attention Warning (DAW)" in
chapter 7.
To adjust Forward Collision-Avoidance Assist
• Active Assist / Warning Only / Off
Forward Safety
For more details, refer to "Forward Collision-Avoidance Assist
(FCA)"in chapter 7.
To adjust the Lane Keeping Assist.
Lane Safety
• Assist / Warning Only / Off
For more details, refer to "Lane Keeping Assist (LKA)" in chapter 7.
• Safe Exit Warning (SEW)
To activate or deactivate Safe Exit Warning.
Blind-Spot
For more details, refer to "Safe Exit Warning (SEW)" in chapter 7.
Safety
• Active Assist / Warning Only / Off
For more details, refer to "Blind-Spot Collision-Avoidance Assist
(BCA)" in chapter 7.
• Rear Cross-Traffic Safety
To activate or deactivate Rear Cross-Traffic Safety.
Parking Safety
For more details, refer to "Rear Cross-Traffic Collision-Avoidance
Assist (RCCA)" in chapter 7.
 The information provided may differ depending on which functions are applicable
to your vehicle.
4-32

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
2. Door
Items
Explanation
• Enable on Shift: All doors will be automatically locked if the
automatic transmission/dual clutch transmission shift lever is
moved from the P (Park) position to the R (Reverse), N (Neutral), or
D (Drive) position. (Only when the engine is running)
Auto Lock
• Enable on Speed: All doors will be automatically locked when the
vehicle speed exceeds 9.3mph (15km/h).
• Disable : The auto door lock operation will be deactivated.
• On Shift to P: All doors will be automatically unlocked if the
automatic transmission/dual clutch transmission shift lever is
moved to P (Park) position. (Only when the engine is running)
Auto Unlock
• On key out/Vehicle Off : All doors will be automatically unlocked.
When the Engine Start/Stop button is set to the OFF position.
• Disable : The auto door unlock operation will be canceled.
• Off: The two press unlock function will be deactivated. Therefore, all
doors will unlock if the door unlock button is pressed.
Two Press
• On: Only the driver’s door will unlock if the door unlock button is
Unlock
pressed. When the door unlock button is pressed again within 4
seconds, the remaining doors will unlock.
To activate or deactivate the smart trunk.
Smart Trunk
For more details, refer to “Smart trunk” in chapter 5.
3. Lights
Items
Explanation
To adjust the illumination level.
Illumination
- Level 1~20
• Off: The one touch turn signal function will be deactivated.
One Touch
3, 5, 7 Flashes: The turn signal indicator will blink 3, 5, or 7 times
Turn Signal
when the turn signal lever is moved slightly.
For more details, refer to “Lighting” in chapter 5.
Headlight
• To activate or deactivate the headlamp delay function.
Delay
For more details, refer to “Lighting” in chapter 5.
High Beam
• To activate or deactivate High Beam Assist.
Assist
For more details, refer to “High Beam Assist (HBA)” in chapter 5.
4-33

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
4. Sound
Items
Explanation
Cluster
Voice
To adjust the cluster voice guidance volume.
Guidance
Volume
Welcome
To activate or deactivate the welcome sound.
sound
5. Convenience
Items
Explanation
• Off: The seat easy access function is deactivated.
• Normal/Extended: When you turn off the engine, the driver’s seat
Seat Easy
will automatically move rearward short (Normal) or long (Extended)
Access
for you to enter or exit the vehicle more comfortably.
For more details, refer to “Driver Position Memory System” in
chapter 5.
Rear
• To activate or deactivate the rear occupant alert system.
Occupant
For more details, refer to “Rear Occupant Alert (ROA)" in chapter 5.
Alert
• On door unlock: The outside rearview mirrors are unfolded and the
welcome light turns on automatically when the doors are unlocked.
Welcome
• On driver approach: The outside rearview mirrors are unfolded
Mirror/Light
and the welcome light turns on automatically when the vehicle is
approached with the smart key.
For more details, refer to ‘’Welcome System’’ in chapter 5.
Wireless
To activate or deactivate the wireless charging system in the front seat.
Charging
For more details, refer to “Wireless cellular phone charging system”
System
in chapter 5.
To activate or deactivate the Wiper/ Light mode.
Wiper/Lights
When activated, the LCD display shows the selected Wiper/Light mode
Display
whenever you changed the mode.
Icy Road
To activate or deactivate the icy road warning function.
Warning
4-34

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
6. Service interval
Items
Explanation
Enable
Service
To activate or deactivate the service interval function.
Interval
Information
To use the service interval menu, we recommend that you consult an authorized
HYUNDAI dealer.
If the service interval is activated and the time and distance is adjusted, messages are
displayed in the following situations each time the vehicle is turned on.
- Service in
: Displayed to inform the driver the remaining mileage and days to service.
- Service required
: Displayed when the mileage and days to service has been reached or passed.
Information
If any of the following conditions occur, the mileage and number of days to service may be
incorrect.
- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.
7. Theme selection
To select the style of instrument cluster graphic style and setting.
• Theme A / Theme B / Theme C
4-35

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Instrument Cluster
8. Other
Items
Explanation
• Off: The average fuel economy will not reset automatically
whenever refueling.
• After ignition: When the engine has been OFF for 4 hours or longer
Fuel Econ.
the average fuel economy will reset automatically.
Reset
• After refueling: The average fuel economy will reset automatically
after adding 1.6 gallon (6 liters) of fuel or more and after driving
speed exceeds 1 mph (1 km/h).
For more details, refer to “Trip Computer” in this chapter.
Speed Unit
To select the speed unit. (km/h, MPH)
(if equipped)
Fuel Econ.
To select the fuel economy unit. (km/L, L/100km, MPG)
Unit
Temperature
To select the temperature unit. (°C,°F)
Unit
Tire Pressure
To select the tire pressure unit. (psi, kPa, bar)
Unit
9. Language (if equipped)
Items
Explanation
Choose the language. You can choose the language in infotain-
Language
ment system. (if equipped)
10. Reset
Items
Explanation
You can reset the menus in the User Settings Mode. All menus in the
Reset
User Settings Mode are reset to factory settings, except language and
service interval.
4-36

-------------------------------------------------------------------------------------------------------------------------------------------------------------

04
Trip Computer
The trip computer is a microcomputer-
controlled driver information system that
displays information related to driving.
Information
Some driving information stored in the
trip computer (for example Average
Vehicle Speed) resets if the battery is
disconnected.
OCN7N071128L
To change the trip mode, toggle the "
,
Trip modes
" switch on the steering wheel.
Drive Info
• Trip distance
• Average Fuel Economy
• Instant Fuel Economy
Since refueling
• Trip distance
• Average Fuel Economy
• Instant Fuel Economy
OTMA040012
Accumulated Info
Drive info
• Trip distance
Trip distance (1), average fuel economy
(2), and total driving time (3) are
• Average Fuel Economy
displayed.
• Instant Fuel Economy
The information is combined for each
ignition cycle.
Digital speedometer
To reset manually, press the OK switch
on the steering wheel for more than 1
second when ‘Drive Info’ is displayed.
4-37

 

 

 

 

 

 

 

Content      ..     2      3      4      5     ..