Connect the heater connector(C), water sensor con-
Fasten the two mounting bolts(F).
Connect the negative(-) terminal.
Start the engine and check for leakage on fuel line
• General insepction.
Hose and pipe for bent, damage, clogging or cor-
Fuel filter for cologging and damage.
• The fuel filter inspection must be completes in
case of below.
Draining fuel in fuel tank and then refilling
Replacing the fuel filter.
Removing the main fuel hose (pipe).
• Fuel filter deflation.
Remove the air plug(I) of fuel filter.
Cover the air plug with service towel, and then
Faten the air plug(I), and then push the manual
• Pulling out water from fuel filter.
Unfasten the drain plug(K).
Push the manual pump(J) until water dose not
Fasten the drain plug(K).