Honda Civic Coupe (2019 year). Instruction - part 10

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Outside

144

Co
ntrols

■

Unlocking the doors

Press the unlock button.
Once:

u

Some exterior lights flash twice, and the driver’s door and fuel fill door unlock.

Twice:

u

The passenger’s door unlocks.

If the lock or unlock button of the remote 
does not work, use the key instead.
Fully insert the key and turn it.

■

Locking/Unlocking the Doors Using a Key

1

Using the Remote Transmitter

If the distance at which the remote transmitter works 
varies, the battery is probably low.
If the LED does not come on when you press a 
button, the battery is dead.

2 Replacing the Button Battery P. 594

You can customize the door unlock mode setting.

2 Customized Features P. 124, 335

1

Locking/Unlocking the Doors Using a Key

When you lock the driver’s door with a key, the 
passenger’s door locks at the same time. When 
unlocking, the driver’s door unlocks first. Turn the 
key a second time within a few seconds to unlock the 
passenger’s door.

You can customize the door unlock mode setting.

2 Customized Features P. 124, 335

Lock

Unlock

145

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Outside

Co
ntrols

If you do not have the key on you, or if for 
some reason you cannot lock a door using the 
key, you can lock the door without it.

■

Locking the driver’s door

Push the lock tab forward 

a

 or push the 

master door lock switch in the lock direction 

b

, and close the door.

■

Locking the passenger’s door

Push the lock tab forward and close the door.

■

Lockout prevention system

The doors cannot be locked when the key is in the ignition switch.

The doors cannot be locked when the smart entry remote is inside the vehicle.

■

Locking a Door Without Using a Key

1

Locking a Door Without Using a Key

When you lock the driver’s door, the passenger’s 
door locks at the same time.
Before locking a door, make sure that the key is not 
inside the vehicle.

Models without smart entry system

Models with smart entry system

146

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Inside

Co
ntrols

Locking/Unlocking the Doors from the Inside

■

Locking a door

Push the lock tab forward.

■

Unlocking a door

Pull the lock tab rearward.

■

Using the Lock Tab

1

Using the Lock Tab

When you lock the door using the lock tab on the 
driver’s door, the passenger’s door locks at the same 
time.
When you unlock the door using the lock tab on the 
driver’s door, only the driver’s door will unlock.

To Unlock

Lock Tab

To Lock

Continued

147

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Inside

Co
ntrols

Pull the inner handle.

u

The door unlocks and opens in one 
motion.

Unlocking and opening the driver’s door from the inner handle unlocks both doors.

To avoid both doors to be unlocked, use the lock tab on the driver’s door to unlock, 
then lock again before opening the door.

u

This setting works for one time only.
If you do not want both doors to be unlocked all the time, customize the Auto 
Door Unlock setting to Off using the driver information interface or audio/
information screen.

2 Customized Features P. 124, 335

■

Unlocking Using the Inner Handle

1

Unlocking Using the Inner Handle

The inner handles are designed to allow front seat 
occupants to open the door in one motion. However, 
this feature requires that front seat occupants never 
pull an inner handle while the vehicle is in motion.

Inner Handle

uu

Locking and Unlocking the Doors

u

Locking/Unlocking the Doors from the Inside

148

Co
ntrols

Press the master door lock switch in as shown 
to lock or unlock both doors.

■

Using the Master Door Lock Switch

1

Using the Master Door Lock Switch

When you lock/unlock either doors using the master 
lock switch, both doors lock/unlock at the same time.

To Unlock

Master Door 
Lock Switch

To Lock

149

uu

Locking and Unlocking the Doors

u

Auto Door Locking/Unlocking

Co
ntrols

Auto Door Locking/Unlocking

Your vehicle locks or unlocks both doors automatically when a certain condition is 
met.

■

Drive lock mode

Both doors lock when the vehicle’s speed reaches about 10 mph (15 km/h).

■

Driver’s door open mode

Both doors unlock when the driver’s door is opened.

■

Auto Door Locking

■

Auto Door Unlocking

1

Auto Door Locking/Unlocking

You can turn off or change to another auto door 
locking/unlocking setting using the driver 
information interface or audio/information screen.

2 Customized Features P. 124, 335

150

Co
ntrols

Opening and Closing the Trunk

Precautions for Opening/Closing the Trunk

■

Opening the trunk

Open the trunk all the way.

u

If it is not fully opened, the trunk lid may begin to close under its own weight.

■

Closing the trunk

Keep the trunk lid closed while driving to:

u

Avoid possible damage.

u

Prevent exhaust gas from leaking into the vehicle.

2 Exhaust Gas Hazard P. 73

Using the Trunk Opener

Press and hold the trunk opener on the 
driver’s door to unlock and open the trunk.

2 When You Cannot Open the Trunk P. 647

Trunk Opener

151

uu

Opening and Closing the Trunk

u

Using the Trunk Release Button

*

Co
ntrols

Using the Trunk Release Button

*

Push up the release button on the trunk lid 
after the doors are unlocked.

2 When You Cannot Open the Trunk P. 647

Even if the trunk is locked, you can open the 
trunk if you carry the smart entry remote.

u

Some exterior lights flash and the beeper 
sounds.

Using the Remote Transmitter

Press the trunk release button for 
approximately one second to unlock and open 
the trunk.

1

Using the Trunk Release Button

*

•

If you forget the smart entry remote inside, the 
beeper will sound and the trunk will not close.

•

A person who is not carrying the smart entry 
remote can unlock the trunk if a person who is 
carrying it is within range.

•

If the beeper sounds after you close the trunk, 
move the smart entry remote away from the trunk 
and close again.

•

The smart entry remote may not operate if it is too 
close to the trunk.

Trunk Release 
Button

Trunk Release Button

* Not available on all models

152

uu

Opening and Closing the Trunk

u

Emergency Trunk Opener

Co
ntrols

Emergency Trunk Opener

The trunk release lever allows you to open the 
trunk from inside for your safety.

Slide the release lever in the direction of the 
arrow.

1

Emergency Trunk Opener

Parents should decide if their children should be 
shown how to use this feature.

Lever

153

Continued

Co
ntrols

Security System

Immobilizer System

The immobilizer system prevents a key that has not been pre-registered from 
starting the engine. Each key contains electronic transmitters that use electronic 
signals to verify the key.

Pay attention to the following when inserting the key into the ignition switch or 
pressing the ENGINE START/STOP button:
• Do not allow objects that emit strong radio waves near the ignition switch or the 

ENGINE START/STOP button.

• Make sure the key is not covered by or touching a metal object.
• Do not bring a key from another vehicle’s immobilizer system near the ignition 

switch or the ENGINE START/STOP button.

• Do not put the key near magnetic items. Electronic devices, such as televisions 

and audio systems emit strong magnetic fields. Note that even a key chain can 
become magnetic.

Security System Alarm

The security system alarm activates when the trunk, hood or doors are forcibly 
opened. The alarm does not activate if the trunk or doors are opened with the key, 
remote transmitter or smart entry system

*

.

However, the alarm activates if a door is opened with the key and then the 
transmission is taken out of 

(

P (continuously variable transmission models) or the 

hood is opened before the ignition switch is turned to ON 

(

w

*1

.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an 
ignition switch.

1

Immobilizer System

NOTICE

Leaving the key in the vehicle can result in theft or 
accidental movement of the vehicle. 
Always take the key with you whenever you leave the 
vehicle unattended.

Do not alter the system or add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.

Canadian models only: Apply and hold the brake 
pedal before turning the vehicle on the first time after 
the battery has been disconnected.

1

Security System Alarm

Do not alter the system or add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.

The security alarm continues for a maximum of two 
minutes until the security system alarm deactivates.

* Not available on all models

uu

Security System

u

Security System Alarm

154

Co
ntrols

■

When the security system alarm activates

The horn sounds intermittently, and some exterior lights flash.

■

To deactivate the security system alarm

Unlock the vehicle using the remote transmitter or smart entry system

*

, or turn the 

ignition switch to ON 

(

w

*1

. The system, along with the horn and flashing lights, is 

deactivated.

■

Setting the security system alarm

The security system alarm automatically sets when the following conditions have 
been met:
• The ignition switch is in LOCK 

(

0

*1

, and the key has been removed from the 

ignition switch.

• The hood and trunk are closed.
• Both doors are locked with the key, the remote transmitter, or smart entry 

system

*

.

■

When the security system alarm sets

The security system alarm indicator in the instrument panel blinks and the blinking 
interval changes after about 15 seconds.

■

To cancel the security system alarm

The security system is canceled when the vehicle is unlocked using the remote 
transmitter or smart entry system

*

, or when the ignition switch is turned to ON 

(

w

*1

. 

The security system indicator goes off at the same time.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an 
ignition switch.

1

Security System Alarm

Do not set the security system alarm when someone 
is in the vehicle or a window is open. The system can 
accidentally activate when:

•

Unlocking the door with the lock tab.

•

Opening the trunk with the trunk opener on the 
driver’s door or the emergency trunk opener.

•

Opening the hood with the hood release.

•

Taking the transmission out of 

(

P.

If the battery goes dead after you have set the 
security system alarm, the security alarm may activate 
once the battery is recharged or replaced.
If this occurs, deactivate the security system alarm by 
unlocking a door using the remote transmitter or 
smart entry system

*

.

Continuously variable transmission models

* Not available on all models

155

uu

Security System

u

Security System Alarm

Co
ntrols

■

The panic button on the remote 
transmitter

If you press the panic button for 
approximately one second, the following will 
occur for about 30 seconds:
• The horn sounds.
• Some exterior lights flash.

■

Canceling panic mode

Press any button on the remote transmitter, or turn the ignition switch to ON 

(

w

*1

.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an 
ignition switch.

■

Panic Mode

Panic Button

156

Co
ntrols

Opening and Closing the Windows

Opening/Closing the Power Windows

The power windows can be opened and closed when the ignition switch is in ON 

(

w

*1

, using the switches on the doors. The driver’s side switches can be used to 

open and close both windows.

The power window lock button on the driver’s side must be switched off (indicator 
off) to open and close the passenger’s window from the passenger’s side.

When the power window lock button is pressed, the indicator comes on and you 
can only operate the driver’s window. Turn the power window lock button on if a 
child is in the vehicle.

■

Manual operation

To open: Push the switch down lightly, and 
hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it 
until the desired position is reached.

■

Automatic operation

To open: Push the switch down firmly.
To close: Pull the switch up firmly.

The window opens or closes completely. To 
stop the window at any time, push or pull the 
switch briefly.

*1: Models with the smart entry system have an ENGINE START/STOP button instead of an 
ignition switch.

■

Opening/Closing the Windows with Auto-Open/Close Function

1

Opening/Closing the Power Windows

The power windows can be operated for up to 10 
minutes after you turn the ignition switch to LOCK 

(

0

*1

.

Opening either door cancels this function.

Auto Reverse
If a power window senses resistance when closing 
automatically, it will stop closing and reverse 
direction.

The driver’s window auto reverse function is disabled 
when you continuously pull up the switch.

The auto reverse function stops sensing when the 
window is almost closed to ensure that it fully closes.

3

WARNING

Closing a power window on someone’s 
hands or fingers can cause serious injury.

Make sure your passengers are away from 
the windows before closing them.

Power 
Window Lock 
Button

Indicator

Driver’s 
Window 
Switch

Passenger’s 
Window Switch

157

uu

Opening and Closing the Windows

u

Opening/Closing the Power Windows

Continued

Co
ntrols

To open: Press the unlock button, and then 
within 10 seconds, press it again and hold it. If 
the windows and moonroof

*

 stop midway, 

repeat the procedure.

■

Opening the Windows and Moonroof

*

 with the Remote

Unlock Button

* Not available on all models

158

uu

Opening and Closing the Windows

u

Opening/Closing the Power Windows

Co
ntrols

To open: Unlock the driver’s door with the 
key. Within 10 seconds of returning the key to 
the central position, turn the key in the unlock 
direction and hold it there.
To close: Lock the driver’s door with the key. 
Within 10 seconds of returning the key to the 
central position, turn the key in the lock 
direction and hold it there.

Release the key to stop the windows and 
moonroof

*

 at the desired position. If you want 

further adjustment, repeat the same 
operation.

■

Opening/Closing the Windows and Moonroof

*

 with the Key

Close

Open

* Not available on all models

159

Co
ntrols

Moonroof

*

You can only operate the moonroof when the power mode is in ON. Use the switch 
in the front of the ceiling to open and close the moonroof.

■

Automatic operation

To open: Pull the switch back firmly.
To close: Push the switch forward firmly.

The moonroof will automatically open or close 
all the way. To stop the moonroof midway, 
touch the switch briefly.

■

Manual operation

To open: Pull the switch back lightly, and 
hold it until the desired position is reached.
To close: Push the switch forward lightly, and 
hold it until the desired position is reached.

■

Tilting the moonroof up

To tilt: Push on the center of the moonroof 
switch.
To close: Push the switch forward firmly, 
then release.

■

Opening/Closing the Moonroof

1

Opening/Closing the Moonroof

NOTICE

Opening the moonroof in below freezing 
temperature or when it is covered with snow or ice 
can damage the moonroof panel or motor.

The power moonroof can be operated for up to 10 
minutes after you set the power mode to VEHICLE 
OFF (LOCK).
Opening either door cancels this function.

When resistance is detected, the auto reverse 
function causes the moonroof to change directions, 
then stop. Auto reverse stops sensing when the 
moonroof is almost closed to ensure that it fully 
closes.

You can use the remote transmitter or the key to 
operate the moonroof.

2 Opening the Windows and Moonroof

*

 

with the Remote P. 157

2 Opening/Closing the Windows and 

Moonroof

*

 with the Key P. 158

3

WARNING

Opening or closing the moonroof on 
someone’s hands or fingers can cause 
serious injury.

Make sure all hands and fingers are clear of 
the moonroof before opening or closing it.

Open

Close

Tilt

* Not available on all models