The plant code denotes a particular axle design, a specific ratio, and if it is a conventional or limited slip
(Traction-Lokohm) type. In addition, the plant code will not change as long as that particular axle assembly
never undergoes an external design change. If, however, an internal design change takes place during the
production life of the axle and that internal change affects parts interchangeability, a dash and numerical suffix
is added to the plant code.
Note that the plant code in the front and rear axle identification tag illustrations is similar, but the illustration
denoting interchangeability affected internally shows the addition of the suffix. This means that as an assembly
both axles are interchangeable; however, internally they are different. Therefore, each requires different internal
parts at the time of repair.
DIAGNOSIS AND TESTING
DRIVELINE SYSTEM
Special Tool(s)
2003 Ford Pickup F150
2003 GENERAL INFORMATION Driveline System - General Information - F150 Pickup