Ford F150 Pickup. Instruction - part 372

2. Remove the bolts.  

3. Remove the anti-lock brake control module.  

Fig. 42: Removing Anti-Lock Brake Control Module 
Courtesy of FORD MOTOR CO. 

NOTE:

When the battery is disconnected and reconnected, some abnormal drive 
symptoms may occur while the vehicle relearns its adaptive strategy. The 
vehicle may need to be driven 16 km (10 mi) or more to relearn the 
strategy.

 

2003 Ford Pickup F150 

2003 BRAKES Anti-Lock Control-Rear - F150 Pickup

  

Fig. 43: Installing Anti-Lock Brake Control Module 
Courtesy of FORD MOTOR CO. 

4. To install, reverse the removal procedure.  

SENSOR - REAR 

Removal & Installation 

1. Raise and support vehicle. For additional information, refer to JACKING & HOISTING . 

NOTE:

Clean off dirt and debris that may have collected around the rear anti-lock 
brake sensor before removal.

 

2003 Ford Pickup F150 

2003 BRAKES Anti-Lock Control-Rear - F150 Pickup

  

Fig. 44: Removing Rear Anti-Lock Brake Sensor 
Courtesy of FORD MOTOR CO. 

2. Remove the rear anti-lock brake sensor. 

1. Disconnect the rear anti-lock brake sensor electrical connector.  

2. Remove the bolt.  

3. Remove the rear anti-lock brake sensor.  

NOTE:

Thoroughly clean the mounting surface.

NOTE:

Inspect the anti-lock brake sensor O-ring for damage; lightly lubricate the 
O-ring with SAE-75W-140 High Performance Rear Axle Lubricant F1TZ-
19580-B or equivalent meeting Ford specification WSL-M2C192-A.

 

2003 Ford Pickup F150 

2003 BRAKES Anti-Lock Control-Rear - F150 Pickup

  

Fig. 45: Installing Rear Anti-Lock Brake Sensor 
Courtesy of FORD MOTOR CO. 

3. To install, reverse the removal procedure.  

SENSOR INDICATOR 

For additional information, refer to FRONT DRIVE AXLE/DIFFERENTIAL-FORD 8.8-INCH or REAR 
DRIVE AXLE/DIFFERENTIAL-FORD 9.75-INCH .

 

2003 Ford Pickup F150 

2003 BRAKES Anti-Lock Control-Rear - F150 Pickup