|
|
Content .. 1114 1115 1116 1117 ..
2. Position the engine in the vehicle. 3. Raise and support the vehicle. For additional information, refer to JACKING & HOISTING . 4. Install the engine support insulator through bolts. Fig. 372: Installing Engine Support Insulator Through Bolts 5. If equipped with a instruction transmission, install the clutch. For additional information, refer to CLUTCH . 6. Install the transmission-to-engine bolts. If equipped with an automatic transmission, refer to AUTOMATIC If equipped with a instruction transmission, refer to MANUAL TRANSMISSION . 7. Install the starter motor. For additional information, refer to REMOVAL & INSTALLATION . 8. Install the four three-way catalytic converter-to-exhaust manifold nuts (two each side).
2003 Ford Pickup F150 2003 ENGINE Engine - 4.2L - F150 Pickup
|