Dodge Nitro. Manual - part 472

2. Push down on the center of the trough (1) to flatten it out and install the remaining trough guide (3) and 

guide shoe (2) into the track. 

Fig. 592: Separating/Installing Trough Pins From Glass Lift Mechanisms 
Courtesy of CHRYSLER LLC 

3. Install the trough guide pins into the glass lift mechanism (3) and seat fully.  

4. Install the glass, see INSTALLATION.  

WEATHERSTRIP/SEALS 

WEATHERSTRIP - A-PILLAR 

REMOVAL 

WEATHERSTRIP - A-PILLAR 

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

Fig. 593: Push Pin, Windshield A-Pillar Molding & Clips 
Courtesy of CHRYSLER LLC 

1. Using a trim stick C-4755 or equivalent, remove the push pin (1).  

2. Remove the windshield A-pillar molding (2) and clips (3) from the windshield A-pillar.  

INSTALLATION 

WEATHERSTRIP - A-PILLAR 

Fig. 594: Push Pin, Windshield A-Pillar Molding & Clips 
Courtesy of CHRYSLER LLC 

1. Install the windshield A-pillar molding (2) and clips (3) to the windshield A-pillar.  

2. Install the push pin (1).  

WEATHERSTRIP - FDB - INNER 

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

REMOVAL 

WEATHERSTRIP - FDB - INNER 

Fig. 595: Removing/Installing Inner Door Weatherstrip 
Courtesy of CHRYSLER LLC 

1. Remove the door trim panel, see REMOVAL.  

2. Rotate the outer belt molding outboard while pulling up to disengage the retention tabs.  

INSTALLATION 

WEATHERSTRIP - FDB - INNER 

Fig. 596: Removing/Installing Inner Door Weatherstrip 
Courtesy of CHRYSLER LLC 

1. Press the belt molding onto the trim panel flange starting at the rear and working forward. 

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro

  

2. Install the door trim panel, see INSTALLATION.  

WEATHERSTRIP - FDB - OUTER 

REMOVAL 

WEATHERSTRIP - FDB - OUTER 

Fig. 597: Removing Outer Belt Molding 
Courtesy of CHRYSLER LLC 

1 - OUTER BELT MOLDING

 

2007 Dodge Nitro R/T 

2007 ACCESSORIES AND EQUIPMENT Body - Nitro