|
|
MANUAL TRANSMISSION 5B-5 Check Clutch not releasing. Improper or low transmission oil. Shift or shift rail binding. Binding of sliding synchronizers or gears. If reverse only, faulty backup switch. Worn or damaged flywheel pilot bushing. Check Control lever assembly broken or damaged. Damaged offset lever, shift fork, selector place or DIAGNOSIS WILL NOT SHIFT(CONTROL LEVER MOVES) Action Replace control lever and housing assembly. Remove extension, adapter or case cover. HARD SHIFT OR CONTROL LEVER WILL NOT MOVE INTO GEAR Action Adjust or replace clutch. Add or replace with specified oil. Remove extension, adapter or case cover. Remove extension, adapter or case cover. Check or replace backup switch. Replace pilot bushing. GEARS CRASH WHEN SHIFTING Check Engine idle speed too high. Damaged or faulty clutch. Pilot bearing between input shaft and output shaft binding. Damaged synchronizer. Bell housing misaligned. Damaged gear(s). Worn or damaged flywheel pilot bushing. Action Adjust idle speed to specified speed. Adjust or replace clutch. Replace or check roller bearings. Check or replace synchronizer parts. Align bell housing and bore. Check or replace gear(s). Replace pilot bushing. |