©
200423
7-5
Lubrication
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΧΦ85 series
5
Lubricating the drive shaft universal joint
1.
Grease the universal joints of the drive shaft
until the grease comes out of all 4 needle
bushes.
Note:
If the grease does not come out of all 4
needle bushes, the joint may be turned to
soften hardened grease.
If the grease does not come out of all 4
needle bushes after the prop shaft has been
repeatedly turned, the joint needs to be
replaced.
The maximum lubricating pressure should
not exceed 15 bar.
Lubricating the automatic brake adjusters
and FTP leading rear axle brake camshafts
V300899
C9 00 346