|
|
Content .. 1147 1148 1149 1150 ..
© 200423 1-1 Specifications FLUIDS, OIL AND LUBRICANTS ΧΦ75 series 3 1. SPECIFICATIONS 1.1 GENERAL IN ORDER TO SATISFY THE WARRANTY CONDITIONS AND GUARANTEE THE LIFESPAN, SAFETY AND RELIABILITY OF DAF PRODUCTS, IT IS OF THE UTMOST IMPORTANCE THAT THE CORRECT FLUIDS, OIL AND LUBRICANTS, COOLANT AND FUEL ARE USED AND THAT THE REQUIRED REPLACEMENT INTERVALS ARE OBSERVED. Lubricant, engine coolant and fuel additives - of whatever type - must not be used except in those circumstances specified by DAF. Always follow the safety instructions below and the instructions that are supplied with the product. Ask your lubricant and fuel supplier(s) whether the products supplied comply with DAF specifications. DAF is not liable for damage or problems in the following instances: 1. use of oil of a lower grade than specified. 2. use of oil of a different viscosity than specified. 3. if the change interval is exceeded. 4. if fuel, lubricants or coolants have been used which do not meet the requirements specified by DAF. |