DAF CF65, CF75, CF85 Series . Manual - part 1146

©

 200423

4-1

Brakes

TECHNICAL DATA

ΧΦ75 series

0

4. BRAKES

4.1 GENERAL

Automatic brake adjuster stroke (Haldex)

35 - 40 mm

Reverse torque value of adjusting bolt

> 18 Nm

TECHNICAL DATA

4-2

©

 200423

Brakes

0

ΧΦ75 series

©

 200423

5-1

Steering gear

TECHNICAL DATA

ΧΦ75 series

0

5. STEERING GEAR

5.1 GENERAL

Maximum steering ball joint axial clearance

1.5 mm

TECHNICAL DATA

5-2

©

 200423

Steering gear

0

ΧΦ75 series

5.2 TIGHTENING TORQUES

Steering gear

The tightening torques stated in this paragraph 

are different from the standard tightening torques 

stated in the overview of the standard tightening 

torques. The other threaded connections not 

specified must therefore be tightened to the 

torque stated in the overview of standard 

tightening torques.

When attachment bolts and nuts are replaced, it 

is important that - unless stated otherwise - these 

bolts and nuts are of exactly the same length and 

property class as those removed.

Note:

-

The two plugs are interchangeable. 

(1) Fit new original attachment bolt and nut.

A

S7 00 906

Filter plug without 

flange (A), fluid flow 

control valve block of 

EMAS system

125 Nm 

≥ 5 Nm

B

S7 00 907

Filter plug with flange 

(B), fluid flow control 

valve block of EMAS 

system

270 Nm 

≥ 20 Nm

Attachment bolt, steering column universal joint

54 Nm + 4 Nm

(1)