DAF CF65, CF75, CF85 Series . Manual - part 1114

©

 200518

1-1

Engine, cooling system and fuel system

TECHNICAL DATA

ΧΦ65/65 (II) series

0

1. ENGINE, COOLING SYSTEM AND FUEL SYSTEM

1.1 GENERAL

1.2 TIGHTENING TORQUES

The tightening torques stated in this section are 

different from the standard tightening torques 

stated in the overview of the standard tightening 

torques. The other threaded connections which 

are not stated must therefore be tightened to the 

torque stated in the overview of standard 

tightening torques.

When attachment bolts and nuts are replaced, it 

is important that - unless stated otherwise - these 

bolts and nuts are of exactly the same length and 

property class as those removed.

Valve clearance
Inspection dimension, cold valve clearance
Inlet

0.15 - 0.40 mm

Exhaust

0.40 - 0.75 mm

Setting dimension, cold valve clearance
Inlet

0.25 mm

Exhaust

0.50 mm

Lubrication system
Oil drain plug

60 Nm

Valve cover
Valve cover attachment bolts

10 Nm

TECHNICAL DATA

1-2

©

 200518

Engine, cooling system and fuel system

0

ΧΦ65/65 (II) series

1.3 FILLING CAPACITIES

Lubrication system

CF 65 cooling system

CF65 (II) cooling system

Total capacity (including oil cooler and oil filter)

approx. 19.5 litres

Sump capacity, maximum level

approx. 17.5 litres

Sump capacity, minimum level

approx. 15.4 litres

Cooling system

approx. 26 litres

With Allison gearbox

approx. 40 litres

Cooling system

approx. 23 litres

©

 200518

2-1

Steering gear and brake system

TECHNICAL DATA

ΧΦ65/65 (II) series

0

2. STEERING GEAR AND BRAKE SYSTEM

2.1 GENERAL

2.2 TIGHTENING TORQUES

The tightening torques stated in this section are 

different from the standard tightening torques 

stated in the overview of the standard tightening 

torques. The other threaded connections not 

specified must therefore be tightened to the 

torque stated in the overview of standard 

tightening torques.

When attachment bolts and nuts are replaced, it 

is important that - unless stated otherwise - these 

bolts and nuts are of exactly the same length and 

property class as those removed.

(1) Fit new original attachment bolt and self-locking nut.

Maximum steering ball joint axial clearance

1.5 mm

Bolt, steering column universal joint

56 Nm

(1)

TECHNICAL DATA

2-2

©

 200518

Steering gear and brake system

0

ΧΦ65/65 (II) series