|
|
• When Monitored: • Set Condition: Possible Causes (R63) DRIVER SQUIB 2 LINE 1 CIRCUIT SHORTED TO (R61) DRIVER SQUIB 2 LINE 2 CIRCUIT CLOCKSPRING DRIVER AIRBAG ORC Diagnostic Test 1. DETERMINE ACTIVE OR STORED DTC NOTE: Ensure the battery is fully charged. NOTE: The Scan Tool, SRS Airbag Load Tool MRL 8443 and DVOM are required to perform the following NOTE: When reconnecting airbag system components the Ignition must be turned off and the Battery must Is the DTC active or stored? ORC - ACTIVE DTC Go To 2 ORC - STORED DTC Go To 6 2. CHECK FOR SHORTED SQUIB CIRCUITS IN DRIVER AIRBAG WARNING: To avoid personal injury or death, turn the ignition off, WARNING: To avoid personal injury or death, do not place an NOTE: Check connectors - Clean and repair as necessary. WARNING: To avoid personal injury or death, turn the ignition on, Does the scan tool display: B1B07 DRIVER AIRBAG SQUIB 2 Yes >> Go To 3 No >> Replace the Driver Airbag in accordance with the Service Information. Perform ORC VERIFICATION TEST - VER 1 8O - 54 RESTRAINTS - ELECTRICAL DIAGNOSTICS LX |