|
|
3. CHECK CLOCKSPRING SQUIB CIRCUITS FOR A SHORT TOGETHER WARNING: To avoid personal injury or death, turn the ignition off, Remove the Steering Control Module from the steering column in accor- Disconnect the Steering Control Module connector. NOTE: Check connectors - Clean and repair as necessary. WARNING: To avoid personal injury or death, turn the ignition on, Does the scan tool display: B1B03 DRIVER AIRBAG SQUIB 1 Yes >> Go To 4 No >> Replace the Clockspring in accordance with the Service Information. Perform ORC VERIFICATION TEST - VER 1 4. CHECK (R43) DRIVER SQUIB 1 LINE 2 CIRCUIT FOR A SHORT TO (R45) DRIVER SQUIB 1 LINE 1 WARNING: To avoid personal injury or death, turn the ignition off, Disconnect the ORC connectors. NOTE: Check connectors - Clean and repair as necessary. Measure the resistance between the (R43) Driver Squib 1 Line 2 circuit Is the resistance below 10K ohms? Yes >> Repair the (R43) Driver Squib 1 Line 2 circuit for a short to the (R45) Driver Squib 1 Line 1 circuit. Perform ORC VERIFICATION TEST - VER 1 No >> Go To 5 8O - 38 RESTRAINTS - ELECTRICAL DIAGNOSTICS LX |