|
|
3. CHECK THE (X208) AMPLIFIED RIGHT I/P SPEAKER (+) CIRCUIT, AND THE (X298) AMPLIFIED RIGHT I/P Turn the ignition off. Disconnect the Amplifier C2 harness connector. Measure the resistance between the (X208) Amplified Right I/P Speaker Is the resistance below 10K ohms? Yes >> Repair the (X208) Amplified Right I/P Speaker (+) circuit, and the (X298) Amplified Right I/P Speaker (-) circuit for a Perform BODY VERIFICATION TEST VER-1. No >> Replace the Amplifier in accordance with the service infor- mation. Perform BODY VERIFICATION TEST VER-1. 8A - 34 AUDIO - ELECTRICAL DIAGNOSTICS LX |