|
|
Content .. 1232 1233 1234 1235 ..
6. (K453) MDS SOLENOID NO.6 CONTROL CIRCUIT SHORTED TO GROUND (PCM SIDE) Turn the ignition off. Measure the resistance between ground and the (K453) MDS Solenoid Is the resistance below 100 ohms? Yes >> Repair the short to ground in the (K453) MDS Solenoid No.6 Control circuit between the PCM harness connector Perform the POWERTRAIN VERIFICATION TEST. (Refer to No >> Go To 7 7. (K453) MDS SOLENOID NO.6 CONTROL CIRCUIT OPEN (PCM SIDE) CAUTION: Do not probe the PCM harness connectors. Probing the Is the resistance below 5.0 ohms? Yes >> Replace and program the Powertrain Control Module in accordance with the service information. Perform the POWERTRAIN VERIFICATION TEST. (Refer to No >> Repair the open in the (K453) MDS Solenoid No.6 Control circuit between the C101 harness connector and the PCM Perform the POWERTRAIN VERIFICATION TEST. (Refer to 9 - 960 ENGINE ELECTRICAL DIAGNOSTICS LX |