|
|
Fig. 337: View Of Cylinder Head Gasket & Locating Pins 3. Remove the gasket (217) and locating pins (230). 4. Discard the gasket and cylinder head bolts. CYLINDER HEAD REMOVAL - RIGHT SIDE
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
Fig. 338: View Of Cylinder Head & Bolts 1. Remove the cylinder head bolts (220, 221). 2. Remove the cylinder head (218). IMPORTANT: The cylinder head bolts are of a torque-to-yield design and are NOT to be used again. Install NEW cylinder head bolts NOTE: After removal, place the cylinder head on 2 wood blocks in
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
Fig. 339: View Of Cylinder Head Gasket & Locating Pins 3. Remove the gasket (217) and locating pins (230). 4. Discard the gasket and cylinder head bolts. VALVE LIFTER REMOVAL
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
Fig. 340: Valve Lifter Guides, Cylinder Head & Bolts 1. Remove the guide bolts (211). 2. Remove the guides (210) with lifters. Note the installed position of the guides. The notched area of the guide is to align with the
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
|
|
|